Form 10-K
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

 

Form 10-K

 

 

(Mark One)

 

x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the fiscal year ended December 31, 2011

Or

 

¨ TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

Commission file number 001-34942

 

 

 

LOGO

Inphi Corporation

(Exact Name of Registrant as Specified in Its Charter)

 

 

Delaware   77-0557980

(State or Other Jurisdiction of

Incorporation or Organization)

 

(I.R.S. Employer

Identification No.)

3945 Freedom Circle, Suite 1100,

Santa Clara, California 95054

(Address of Principal Executive Offices) (Zip Code)

Registrant’s telephone number, including area code: (408) 217-7300

Securities registered pursuant to Section 12(b) of the Act:

 

Title of Class

 

Name of Exchange on Which Registered

Common Stock, $0.001 par value   New York Stock Exchange

Securities registered pursuant to Section 12(g) of the Act: None

 

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.    Yes  ¨    No  x

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.    Yes  ¨    No  x

Indicate by check mark whether the registrant: (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  x

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):

 

Large accelerated filer   ¨    Accelerated filer   x
Non-accelerated filer   ¨  (Do not check if a smaller reporting company)    Smaller reporting company   ¨

Indicate by check mark whether the registrant is a shell company (as defined in Exchange Act Rule 12b-2).    Yes  ¨    No  x

As of June 30, 2011, the aggregate market value of the Registrant’s common stock held by non-affiliates of the Registrant was approximately $339 million, based on the closing price of the common stock as reported on the New York Stock Exchange for that date.

The total number of shares outstanding of the Registrant’s common stock, $0.001 par value per share, as of February 28, 2012 was 28,161,702.

 

 

DOCUMENTS INCORPORATED BY REFERENCE

Part III incorporates by reference certain information from the registrant’s definitive proxy statement for the 2012 Annual Meeting of Stockholders to be filed no later than 120 days after the conclusion of the registrant’s fiscal year ended December 31, 2011.

 

 

 


Table of Contents

INPHI CORPORATION

ANNUAL REPORT ON FORM 10-K

FOR THE FISCAL YEAR ENDED DECEMBER 31, 2011

TABLE OF CONTENTS

 

          Page  

PART I

  

Item 1.

   Business      1   

Item 1A.

   Risk Factors      12   

Item 1B.

   Unresolved Staff Comments      31   

Item 2.

   Properties      31   

Item 3.

   Legal Proceedings      32   

Item 4.

   Mine Safety Disclosures      34   

PART II

  

Item 5.

   Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities      35   

Item 6.

   Selected Consolidated Financial Data      37   

Item 7.

   Management’s Discussion and Analysis of Financial Condition and Results of Operations      39   

Item 7A.

   Quantitative and Qualitative Disclosures about Market Risk      56   

Item 8.

   Financial Statements and Supplementary Data      57   

Item 9.

   Changes in and Disagreements with Accountants on Accounting and Financial Disclosure      93   

Item 9A.

   Controls and Procedures      93   

Item 9B.

   Other Information      93   

PART III

  

Item 10.

   Directors, Executive Officers and Corporate Governance      94   

Item 11.

   Executive Compensation      94   

Item 12.

   Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters      94   

Item 13.

   Certain Relationships and Related Transactions, and Director Independence      94   

Item 14.

   Principal Accountant Fees and Services      94   

PART IV

  

Item 15.

   Exhibits and Financial Statement Schedules      95   


Table of Contents

PART I

 

ITEM 1. BUSINESS

This report contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. When used in this report, the terms “may,” “might,” “will,” “objective,” “intend,” “should,” “could,” “can,” “would,” “expect,” “believe,” “estimate,” “predict,” “potential,” “plan,” or the negative of these terms, and similar expressions intended to identify forward-looking statements. These statements are statements that relate to future periods and include statements regarding our anticipated trends and challenges in our business and the markets in which we operate, including the market for 40G and 100G high-speed analog semiconductor solutions, our plans for future products, such as our isolation memory buffer or iMB™, clock and data recovery, or CDR, and serializer/deserializer, or SERDES, products, and enhancements of existing products, our expectations regarding our expenses and revenue, sources of revenue, our tax benefits, the benefits of our products and services, timing of the development of our products, our anticipated cash needs and our estimates regarding our capital requirements and our needs for additional financing, our anticipated growth and growth strategies, our ability to retain and attract customers, particularly in light of our dependence on a limited number of customers for a substantial portion of our revenue, our expectations regarding competition, interest rate sensitivity, adequacy of our disclosure controls, our legal proceedings and warranty claims. These forward-looking statements involved known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by these or any other forward-looking statements. These risks and uncertainties include, but are not limited to, those risks discussed below, as well as factors affecting our results of operations, our ability to manage our growth, our ability to sustain or increase profitability, demand for our solutions, the effect of declines in average selling prices for our products, our ability to compete, our ability to rapidly develop new technology and introduce new products, our ability to safeguard our intellectual property, trends in the semiconductor industry and fluctuations in general economic conditions, and the risks set forth throughout this Report, including the risks set forth under Part I, “Item 1A, Risk Factors”. Readers are cautioned not to place undue reliance on these forward-looking statements, which are based on current expectations and reflect management’s opinions only as of the date hereof. These forward-looking statements speak only as of the date of this Report. We expressly disclaim any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained herein to reflect any change in our expectations with regard thereto or any changes in events, conditions or circumstances on which any such statement is based.

All references to “Inphi,” “we,” “us” or “our” mean Inphi Corporation.

Inphi®, iMB™ and the Inphi logo are trademarks or service marks owned by Inphi. All other trademarks, service marks and trade names appearing in this report are the property of their respective owners.

Overview

Our Company

We are a fabless provider of high-speed analog semiconductor solutions for the communications and computing markets. Our analog semiconductor solutions provide high signal integrity at leading-edge data speeds while reducing system power consumption. Our semiconductor solutions are designed to address bandwidth bottlenecks in networks, maximize throughput and minimize latency in computing environments and enable the rollout of next generation communications and computing infrastructures. Our solutions provide a vital high-speed interface between analog signals and digital information in high-performance systems such as telecommunications transport systems, enterprise networking equipment, datacenters and enterprise servers, storage platforms, test and measurement equipment and military systems. We provide 40G and 100G high-speed analog semiconductor solutions for the communications market and high-speed memory interface solutions for the computing market. We have a broad product portfolio with 17 product lines and over 170 products as of December 31, 2011.

 

1


Table of Contents

We leverage our proprietary high-speed analog signal processing expertise and our deep understanding of system architectures to address data bottlenecks in current and emerging communications, enterprise network, computing and storage architectures. We develop these solutions as a result of our competitive strengths, including our system-level simulation capabilities, analog design expertise, strong relationships with industry leaders, extensive broad process technology experience and high-speed package modeling and design expertise. We use our core technology and strength in high-speed analog design to enable our customers to deploy next generation communications and computing systems that operate with high performance at high speed. We believe we are at the forefront of developing semiconductor solutions that deliver 100G speeds throughout the network infrastructure, including core, metro and the datacenter. Furthermore, our analog signal processing expertise enables us to improve throughput in computing systems. For example, some of our computing products enable up to four times the memory capacity on server platforms while using the current generation of memory devices.

We have ongoing, informal collaborative discussions with industry and technology leaders such as Advanced Micro Devices, Inc., Alcatel-Lucent, Huawei Technologies Co., Ltd. and Intel Corporation to design architectures and products that solve bandwidth bottlenecks in existing and next generation communications and computing systems. Although we do not have any formal agreement with these entities, we engage in informal discussions with these entities with respect to anticipated technological challenges, next generation customer requirements and industry conventions and standards. We help define industry conventions and standards within the markets we target by collaborating with technology leaders, original equipment manufacturers or OEMs, systems manufacturers and standards bodies. Our products are designed into systems sold by OEMs, including Agilent Technologies, Inc., Alcatel-Lucent, Cisco Systems, Inc., Danaher Corporation, Dell Inc., EMC Corporation, Hewlett-Packard Company, Huawei, International Business Machines Corporation and Oracle Corporation. We believe we are one of a limited number of suppliers to these OEMs, and in some cases we may be the sole supplier for certain applications. We sell both directly to these OEMs and to other intermediary systems or module manufacturers that, in turn, sell to these OEMs.

Our Business

Our semiconductor solutions leverage our deep understanding of high-speed analog signal processing and our system architecture knowledge to address data bottlenecks in current and emerging network architectures. We design and develop our products for the communications and computing markets, which typically have two to three year design cycles, and product life cycles of 10 or more years. We believe our leadership position in developing high-speed analog semiconductors is a result of the following core strengths:

 

   

System-Level Simulation Capabilities. We design our high-speed analog semiconductor solutions to be critical components in complex systems. In order to understand and solve system problems, we work closely with systems vendors to develop proprietary component, channel and system simulation models. We use these proprietary simulation and validation tools to accurately predict system performance prior to fabricating the semiconductor or alternately, to identify and optimize critical semiconductor parameters to satisfy customer system requirements. We use these simulation and validation capabilities to reduce our customers’ time to market and engineering investments, thus enabling us to establish differentiated design relationships with our customers.

 

   

Analog Design Expertise. We believe that we are a leader in developing broadband analog semiconductors operating at high frequencies of up to 100 GHz. High-speed analog circuit design is extremely challenging because, as frequencies increase, semiconductors are increasingly sensitive to temperature, power supply noise, process variation and interaction with neighboring circuit elements. Development of components that work robustly at high frequencies requires an understanding of analog circuit design, including electromagnetic theory and practical experience in implementation and testing. Our analog design expertise has enabled us to design and commercially ship the first 18 GHz track-and-hold amplifier, 28 GHz linear transimpedance amplifier, 40 GHz transimpedance amplifier and 50 GHz multiplexer, or MUX and demultiplexer, or DEMUX components. We also launched the

 

2


Table of Contents
 

industry’s first complementary metal oxide semiconductor or CMOS based 100G physical layers or PHYs and CDRs for Ethernet and optical transport network applications. These high speed serial PHYs are designed in a generic CMOS process to target much lower power compared to silicon germanium or SiGe based products, while reducing the design footprint and improving manufacturability.

 

   

Strong Relationships with Industry Leaders. We develop many of our high-speed analog semiconductor solutions for applications and systems that are driven by industry leaders in the communications and computing markets. Through our established relationships with industry leaders, we have repeatedly demonstrated the ability to address their technological challenges. As a result, we are designed into several of their current systems and believe we are well-positioned to develop high-speed analog semiconductor solutions for their emerging architectures. For instance, our high-speed memory interface designs have been validated for Intel’s Xeon® Core i7® and next generation platforms. We have ongoing, informal collaborative discussions with communication companies such as Alcatel-Lucent and Huawei to address their next generation 100G efforts, although we have not entered into formal agreements with these entities. Specifically, we engage in informal discussions with these entities with respect to anticipated technological challenges, next generation customer requirements and industry conventions and standards. As a result of our development efforts with industry leaders, we help define industry conventions and standards within the markets we target by collaborating with technology leaders, OEMs and systems manufacturers, as well as standards bodies such as the Joint Electronic Device Engineering Councils, or JEDEC, and the Institute of Electrical and Electronic Engineers, or IEEE, and the Optical Internetworking Forum, or OIF, to establish industry standards.

 

   

Broad Process Technology. We employ process technology experts, device technologists and circuit designers who have extensive experience in many process technologies including CMOS, SiGe and III-V technologies such as gallium arsenide, or GaAs or indium phosphide, or InP. We have developed specific internal models and design kits for each process to support a uniform design methodology across all of our semiconductor solutions. For example, our products using 40 nanometer CMOS technology require development of accurate models for sub-circuits such as integrated phase lock loop, or PLLs, varactors and inductors. As another example, for III-V materials-based processes, in-house model development is a necessity and we believe also provides a substantial competitive advantage because these processes have complex material and device interactions. Combined with our fabless manufacturing strategy, our design expertise, proprietary model libraries and uniform design methodology allow us to use the best possible materials and substrates to design and develop our semiconductor solutions. We believe that our ability to design high-speed analog semiconductors in a wide range of materials and process technologies allows us to provide superior performance, power, cost and reliability for a specific set of market requirements.

 

   

High-Speed Package Modeling and Design. We have developed deep expertise in high-speed package modeling and design, since introducing the first high-speed 50 GHz MUX and DEMUX product in 2001. At high frequencies, the interaction between an analog device, its package and the external environment can significantly affect product performance. Accurately modeling and developing advanced packaging allows semiconductor solutions to address this challenge. Due to the advanced nature of this work, there is a limited supply of engineers with experience in high-speed package modeling and design, and therefore this required expertise can be difficult to acquire for companies that have not invested in developing such a skill set. We have developed an infrastructure to simulate electrical, mechanical and thermal properties of devices and packages that we integrate within our semiconductor design process and implement at our third-party packaging providers. Modeling is an inherently iterative process, and since our model libraries are used extensively by our circuit designers, the accuracy and value of these models increases over time. Our current packaging and modeling techniques enable us to deliver semiconductors that are energy efficient, offer high-speed processing and enable advanced signal integrity, all in a small footprint.

 

3


Table of Contents

We believe that our system-level simulation capabilities, our analog design and broad process technology design capabilities as well as our strengths in packaging enable us to differentiate ourselves by delivering advanced high-speed analog signal processing solutions. For example, we believe we have successfully demonstrated the feasibility of our next generation 100G Ethernet architecture well ahead of our competitors. Within the server market, we have applied our analog signal processing expertise to develop our iMBTM technology, which is designed to expand the memory capacity in existing server and computing platforms. Adoption of the iMBTM allows up to four times the memory capacity to be installed in a server platform, while using the current generation of memory devices.

We believe the key benefits that our solutions provide to our customers are as follows:

 

   

High Performance. Our high-speed analog semiconductor solutions are designed to meet the specific technical requirements of our customers in their respective end-markets. In many cases, our close design relationships and deep engineering expertise put us in a position where we are one of a limited group of semiconductor vendors that can provide the necessary solution. For instance, in the broadband communications market, we believe our products achieve the highest signal integrity and attain superior signal transmission distance at required error-free or low error rates. In the computing market, we believe our products achieve industry leading data transfer rates at the smallest die size.

 

   

Low Power and Small Footprint. In each of the end markets that we serve, the power budget of the overall system is a key consideration for systems designers. Power consumption greatly impacts system operation cost, footprint and cooling requirements, and is increasingly becoming a point of focus for our customers. We believe that our high speed analog signal processing solutions enable our customers to implement system architectures that reduce overall system power consumption. We also believe that, at high frequencies, our high-speed analog semiconductor devices typically consume less power than competitors’ standard designs, which often incorporate power-consuming digital signal processing to perform data transfer functions, thereby further reducing overall system power consumption. In addition, in many of our applications, we are able to design and deliver semiconductors that have a smaller footprint and therefore reduce the overall system size.

 

   

Faster Time to Market. Our customers compete in markets that require high-speed, reliable semiconductors that can be integrated into their systems as soon as new market opportunities develop. To meet our customers’ time-to-market requirements, we work closely with them early in their design cycles and are actively involved in their development processes. Over the past ten years, we have developed methodologies and simulation environments that accurately predict the behavior of complex integrated circuits within various communications systems. In addition, we have developed an extensive internal library of proven building block circuits such as amplifiers, phase frequency detectors and transmitters that are reused to shorten design cycles and reduce risk.

Products

Our products address bandwidth bottlenecks throughout the cloud computing and network communications infrastructure, as depicted in the illustration below. For instance, our high-speed memory interface products can be found in servers where they allow CPUs to better utilize available memory resources. In addition, our products find application in devices such as dense wavelength division multiplexers that enable core and aggregation networks.

 

4


Table of Contents

 

LOGO

As of December 31, 2011, we had more than 170 products across 17 product lines, including products that have commercially shipped, products for which we have shipped engineering samples and products under development, that perform a wide range of functions such as amplifying, encoding, multiplexing, demultiplexing, retiming and buffering data and clock signals at speeds up to 100 Gbps. These products are key enablers for servers, routers, switches, storage and other equipment that process, store and transport data traffic. Our products are also used in test and measurement equipment and military radar systems that capture and process high-speed and ultra broadband signals. We introduced 8 new products in both 2011 and 2010. We design and develop our products for the communications and computing markets, which typically have two to three year design cycles, and product life cycles as long as 10 years or more.

In 2009, we successfully introduced and began to ship a new product in production which we identify as product number INSSTE32882-GS04, or the GS04 product, and which consists of an integrated PLL and register buffer. Sales of the GS04 product comprised 18% and 43% of our total revenue in 2010 and 2009, respectively. In 2010, we also began to ship in production volume a “low voltage” version of our integrated PLL and register buffer, which is shipping in the form of product number INSSTE32882LV-GS02, or the GS02 product. The GS02 product has been launched and in full commercial production. Sales of the GS02 product comprised 38% and 32% of our total revenue in 2011 and 2010, respectively. In 2011, we began to ship in production volume a new “ultra-low voltage” version of our integrated PLL and register buffer, which is shipping in the form of product number INSSTE32882UV-GS02, or the GS02UV product. Sales of the GS02UV product comprised 13% of our total revenue in 2011. There were no other products that generated more than 10% of our total revenue in 2011, 2010 or 2009.

 

5


Table of Contents

The table below lists our products, their application speed in gigabits per second, or Gbps or G, and functional description.

 

Product Line

   Speed   

Description

  

Application

Clock and Data Recovery (CDR)

   100G    Recovers the clock from high-speed signals; used to retime the signal prior to re-transmitting to ensure the highest signal integrity    Enables the next generation of small form factor 100G Ethernet modules, line cards and backplane applications

Clock fanout

   10G to 50G    Provides replication and buffering of high-speed clock signals    Typically used to distribute a high-speed clock to multiple chips in a system

Demultiplexer (DEMUX)

   10G to 50G    De-serializes a high-speed data stream to multiple lower speed data streams for further signal processing    Typically used in high-speed data acquisition applications

D Flip Flops

   10G to 50G    Retimes the input signal to deliver optimal signal integrity    Typically used in high-speed pattern generation applications

Differential Amplifiers

   10G    Amplifies differential signals and drives high-speed analog-to-digital converters    Typically used to amplify linear broadband signals or drive high-speed analog-to-digital converters for data acquisition applications

Differential Encoders

   10G    Provides differential encoding function for Differential Phase Shift Keying (DPSK) transmission    Typically used in 10 Gbps ultra long haul optical transceivers

Isolation Memory Buffer (iMBTM)

   1.6G    Provides critical high-speed interface between the central processing unit (CPU) and memory    Architecture adopted by the Joint Electronic Device Engineering Council as an industry standard

Latched Comparator

   10G to 50G    Used as a high-speed 1-bit analog-to-digital converter    Typically used in high-speed data acquisition applications

Logic Gates

   10G to 50G    Standard logic gates used as general-purpose building blocks for high-speed data processing    Typically used in test and measurement applications

Modulator Driver

   40G to 100G    Amplifies a small signal to 8 volts (or higher) output voltage in order to drive optical modulators for very long distance data transmission    Typically used in optical transmission systems and test and measurement equipment

Multiplexer (MUX)

   10G to 50G    Serializes multiple data streams to a high-speed data stream prior to transmission    Typically used in high-speed pattern generation applications

 

6


Table of Contents

Product Line

   Speed   

Description

  

Application

Phase-Lock Loop (PLL)*

   1.86G    Provides critical high-speed interface between CPU and memory    Typically used for all but the lowest capacity modules in order to install sufficient memory in computing and storage platforms

Prescalers

   10G to 50G    Divides the high frequency clock to a lower frequency clock    Typically used in test and measurement, military and ultra long haul optical transmission equipment

Register Buffers*

   1.86G    Regenerates a CPU’s command and address signals    Typically used for all but the lowest capacity modules in order to install sufficient memory in computing and storage platforms

Return-to-Zero (RZ) Converter

   10G    Converts a Non-Return-to-Zero (NRZ) digital bit stream to RZ format    Typically used in 10 Gbps ultra long haul optical transceivers

Serializer-Deserializer (SERDES)

   100G    Combines a serializer, deserializer, equalizer and CDR functions on one chip    Enables the next generation of high density 100G Ethernet linecards

Transimpedance Amplifier (TIA)

   10G to 100G    Amplifies small currents generated by a photodetector for further signal processing    Typically used in optical transceivers for Ethernet, synchronous optical networking, dense wavelength division multiplexing, as well as other optical receiver applications

 

* Please refer to paragraph immediately preceding the table above.

Each of the products listed in the table above are currently in commercial production except for our CDR and SERDES products, which are under development. In the third quarter of 2011, we shipped engineering samples of our CDR and SERDES products and expect to commence commercial production in 2013.

Customers

We sell our products directly to OEMs and indirectly to OEMs through module manufacturers, original design manufacturers or ODMs and sub-systems providers. We work closely with technology leaders, including microprocessor and communications equipment companies, to design architectures and products that help solve bandwidth bottlenecks in and between systems. These technology leaders often design our products into reference designs, which they provide to their customers and suppliers. For example, in the server market we work closely with major CPU manufacturers to address the bottleneck between their CPU and the increasing amount of memory attached to it. These CPU manufacturers then provide their server CPU customers and memory module partners with a validation report, including validation of our memory interface products. These server OEMs and memory module companies then design our memory interface products into their production systems. Ultimately, our sales into these servers are to memory module companies, including Hynix, Micron, Samsung and others. In the networking market, we work closely with OEMs to deliver high performance communication links. These OEMs design our product into their systems and then require their ODM and electronics manufacturing services suppliers to purchase and use that specific product from us. We also work directly with module manufacturers to design our products into their modules, which they sell to OEMs.

 

7


Table of Contents

We work closely with our customers throughout design cycles that often last two to three years and we are able to develop long-term relationships with them as our technology becomes embedded in their products. As a result, we believe we are well-positioned to not only be designed into their current systems, but also to continually develop next generation high-speed analog semiconductor solutions for their future products. During the year ended December 31, 2011, we sold our products to more than 160 customers.

Sales to customers in Asia accounted for 69%, 80% and 77% of our total revenue in 2011, 2010 and 2009, respectively. Because many of our customers or their OEM manufacturers are located in Asia, we anticipate that a majority of our future revenue will continue to come from sales to that region. Although a large percentage of our sales are made to customers in Asia, we believe that a significant number of the systems designed by these customers and incorporating our semiconductor products are then sold to end users outside Asia.

We currently rely, and expect to continue to rely, on a limited number of customers for a significant portion of our revenue. In the year ended December 31, 2011, Samsung and Hynix accounted for 27% and 14% of our total revenue, respectively, and our 10 largest customers collectively accounted for 73% of our total revenue. In addition, sales directly and through distributors to Micron accounted for 11% of our total revenue in the year ended December 31, 2011. Samsung directly accounted for 34% of our total revenue and sales directly and through distributors to Micron accounted for 11% of our total revenue for the year ended December 31, 2010. No other single customer directly or indirectly accounted for more than 10% of our total revenue in 2011 or 2010.

Sales and Marketing

Our design cycle from initial engagement to volume shipment is typically two to three years, with product life cycles in the markets we serve ranging from two to 10 years or more. For many of our products, early engagement with our customers’ technical staff is necessary for success. To ensure an adequate level of early engagement, our application and development engineers work closely with our customers to identify and propose solutions to their systems challenges.

In addition to our direct customers, we work closely with technology leaders such as Intel and AMD for the computing and storage markets and Alcatel-Lucent, Cisco, Huawei for the networking and communications market to anticipate and solve next generation challenges facing our customers. As part of the sales and product development process, we often design our products in close collaboration with these industry leaders and help define their architecture. We also participate actively in setting industry standards with organizations such as IEEE, JEDEC and OIF to have a voice in the definition of future market trends.

We sell our products worldwide through multiple channels, including our direct sales force and a network of sales representatives and distributors. For the year ended December 31, 2011, 83% of our revenue was generated by our direct sales team and third-party sales representatives. We operate direct sales offices in Japan, Korea, Singapore, Taiwan and the United States and employ sales personnel that cover our direct customers and manage our channel partners. We utilize two sales representatives and three distributors in Asia, a distributor in Europe, a distributor in Israel, ten sales representatives and two distributors in North America and a distributor in Japan. Our channel network includes more than 100 sales professionals to support our products and customers, including seven in Japan, 21 in Asia (other than Japan), 62 in North America and 26 in Europe, the Middle East and Africa, or EMEA. All of these sales professionals are sales agents and are employed by our distributors and sales representatives except for 10 sales agents who are our direct employees, including two in Japan, three in Asia, four in North America and one in EMEA. We believe these distributors and sales representatives have the requisite technical experience in our target markets and are able to leverage existing relationships and understanding of our customers’ products to effectively sell our products. Given the breadth of our target markets, customers and products, we provide our direct and indirect sales teams with regular training and share product information with our customers and sales team using web-based tools.

 

8


Table of Contents

Manufacturing

We operate a fabless business model and use third-party foundries and assembly and test manufacturing contractors to manufacture, assemble and test our semiconductor products. We also inspect and test parts in our Westlake Village, California, facility. This outsourced manufacturing approach allows us to focus our resources on the design, sale and marketing of our products. In addition, we believe outsourcing many of our manufacturing and assembly activities provides us the flexibility needed to respond to new market opportunities, simplifies our operations and significantly reduces our capital requirements.

We subject our third-party manufacturing contractors to qualification requirements in order to meet the high quality and reliability standards required of our products. We carefully qualify each of our partners and processes before applying the technology to our products. Our engineers work closely with our foundries and other contractors to increase yield, lower manufacturing costs and improve product quality.

 

   

Wafer Fabrication. We currently utilize a wide range of semiconductor processes to develop and manufacture our products. Each of our foundries tends to specialize in a particular semiconductor wafer process technology. We choose the semiconductor process and foundry that we believe provides the best combination of performance attributes for any particular product. For most of our products, we utilize a single foundry for semiconductor wafer production. Our principal foundries are Taiwan Semiconductor Manufacturing Company Ltd., or TSMC, in Taiwan, Sumitomo Electric Device Innovations Inc., or SEDI, in Japan, WIN Semiconductors Corp. in Taiwan, Global Communications Semiconductors, Inc., or GCS, in North America and United Monolithic Semiconductors S.A.S, or UMS, in France.

 

   

Package and Assembly. Upon the completion of processing at the foundry, the finished wafers are shipped to our third-party assemblers for packaging and assembly. Currently, our principal packaging and assembly contractors are Orient Semiconductor Electronics Ltd., or OSE in Taiwan, STATS ChipPAC Ltd. in Korea, Signetics Korea Co., Ltd. in Korea, Kyocera Corporation in North America and Japan, and Natel Engineering Co., Inc., in North America.

 

   

Test. At the last stage of integrated circuit production, our third-party test service providers test the packaged and assembled integrated circuits. Currently, OSE in Taiwan, Advanced Semiconductor Engineering or ASE in California, STATS ChipPAC in Korea, Signetics in Korea and Presto Engineering in North America are our test partners. We also perform testing in our Westlake Village, California, facility.

We are committed to maintaining the highest level of quality in our products. Our objective is that our products meet all of our customer requirements, are delivered on-time and function reliably throughout their useful lives. As part of our total quality assurance program, our quality management system has been certified to ISO 9001:2008 standards. Our manufacturing partners are also ISO 9001 certified.

Research and Development

We focus our research and development efforts on developing products that address bandwidth bottlenecks in networks and minimize latency in computing environments. We believe that our continued success depends on our ability to both introduce improved versions of our existing products and to develop new products for the markets that we serve. We devote a portion of our resources to expanding our core technology including efforts in system-level simulation, high-speed analog design, supporting a broad range of process technologies and high-speed package modeling and design.

We develop models that are used as an input to a combination of proprietary and commercially available simulation tools. We use these tools to predict overall system performance based on the performance of our product. After our product is manufactured, we perform system measurements and refine our model set to improve the model’s accuracy and predictive ability. As a result, our models and simulation tools have improved over time and we have been able to very accurately predict overall system performance prior to fabricating a part.

 

9


Table of Contents

We have assembled a core team of experienced engineers and systems designers in three design centers located in the United States, the United Kingdom and Taiwan. Our technical team typically has, on average, more than 20 years of industry experience with more than 65% having advanced degrees and more than 20% having Ph.Ds. These engineers and designers are involved in advancing our core technologies, as well as applying these core technologies to our product development activities across a number of areas including telecommunications transport systems, enterprise networking equipment, datacenters and enterprise servers, storage platforms, test and measurement and military systems. In 2011, 2010 and 2009, our research and development expenses were $28.6 million, $23.8 million and $17.8 million, respectively.

Competition

The global semiconductor market in general, and the communications and computing markets in particular, are highly competitive. We expect competition to increase and intensify as more and larger semiconductor companies enter our markets. Increased competition could result in price pressure, reduced profitability and loss of market share, any of which could materially and adversely affect our business, revenue and operating results.

Currently, our competitors range from large, international companies offering a wide range of semiconductor products to smaller companies specializing in narrow markets. Our primary competitors include Broadcom Corporation, Hittite Microwave Corporation, Integrated Device Technology, Inc., or IDT, and Texas Instruments Incorporated, as well as other smaller analog signal processing companies. We expect competition in our target markets to increase in the future as existing competitors improve or expand their product offerings. In addition, as we continue to develop our 100G semiconductor solutions for enterprise networks, we may face competition from companies such as Broadcom, Semtech Corp. and Triquint Semiconductor.

Our ability to compete successfully depends on elements both within and outside of our control, including industry and general economic trends. During past periods of downturns in our industry, competition in the markets in which we operate intensified as our customers reduced their purchase orders. Many of our competitors are significantly larger, have greater financial, technical, marketing, distribution, customer support and other resources, are more established than we are, and have significantly better brand recognition and broader product offerings with which to withstand similar adverse economic or market conditions in the future. These developments may materially and adversely affect our current and future target markets and our ability to compete successfully in those markets.

We compete or plan to compete in different target markets to various degrees on the basis of a number of principal competitive factors, including:

 

   

product performance;

 

   

power budget;

 

   

features and functionality;

 

   

customer relationships;

 

   

size;

 

   

ease of system design;

 

   

product roadmap;

 

   

reputation and reliability;

 

   

customer support; and

 

   

price.

We believe we compete favorably with respect to each of these factors. We maintain our competitive position through our ability to successfully design, develop and market complex high-speed analog solutions for the customers that we serve.

 

10


Table of Contents

Intellectual Property

We rely on a combination of intellectual property rights, including patents, trade secrets, copyrights and trademarks, and contractual protections, to protect our core technology and intellectual property. As of December 31, 2011, we had 35 issued and allowed patents in the United States and other patent applications pending in the United States. The 35 issued and allowed patents in the United States expire in the years beginning in 2021 through 2027. Many of our issued patents and pending patent applications relate to high-speed circuit and package designs.

We may not receive competitive advantages from any rights granted under our patents, and our patent applications may not result in the issuance of any patents. In addition, any future patent may be opposed, contested, circumvented, designed around by a third party or found to be unenforceable or invalidated. Others may develop technologies that are similar or superior to our proprietary technologies, duplicate our proprietary technologies or design around patents owned or licensed by us.

In addition to our own intellectual property, we also use third-party licensors for certain technologies embedded in our semiconductor solutions. These are typically non-exclusive contracts provided under paid-up licenses. These licenses are generally perpetual or automatically renewed for so long as we continue to pay any maintenance fees that may be due. To date, maintenance fees have not constituted a significant portion of our capital expenditures. We have entered into a number of licensing arrangements pursuant to which we license third-party technologies. We do not believe our business is dependent to any significant degree on any individual third-party license.

We generally control access to and use of our confidential information through the use of internal and external controls, including contractual protections with employees, contractors and customers. We rely in part on United States and international copyright laws to protect our mask work. All employees and consultants are required to execute confidentiality agreements in connection with their employment and consulting relationships with us. We also require them to agree to disclose and assign to us all inventions conceived or made in connection with the employment or consulting relationship.

Despite our efforts to protect our intellectual property, unauthorized parties may still copy or otherwise obtain and use our software, technology or other information that we regard as proprietary intellectual property. In addition, we intend to expand our international operations, and effective patent, copyright, trademark and trade secret protection may not be available or may be limited in foreign countries.

The semiconductor industry is characterized by vigorous protection and pursuit of intellectual property rights and positions, which has resulted in protracted and expensive litigation for many companies. We have in the past received and, particularly as a public company, we expect that in the future we may receive, communications from various industry participants alleging our infringement of their patents, trade secrets or other intellectual property rights. Any lawsuits could subject us to significant liability for damages, invalidate our proprietary rights and harm our business and our ability to compete. Any litigation, regardless of success or merit, could cause us to incur substantial expenses, reduce our sales and divert the efforts of our technical and management personnel. In the event we receive an adverse result in any litigation, we could be required to pay substantial damages, seek licenses from third parties, which may not be available on reasonable terms or at all, cease sale of products, expend significant resources to develop alternative technology or discontinue the use of processes requiring the relevant technology.

Employees

At December 31, 2011, we employed 165 full-time equivalent employees, including 91 in research, product development and engineering, 29 in sales and marketing, 22 in general and administrative management and 23 in manufacturing logistics. We consider relations with our employees to be good and have never experienced a work stoppage. None of our employees are either represented by a labor union or subject to a collective bargaining agreement.

 

11


Table of Contents

Other

We were incorporated in Delaware in November 2000 as TCom Communications, Inc. and changed our name to Inphi Corporation in February 2001. Our principal executive offices are located at 3945 Freedom Circle, Suite 1100, Santa Clara, California 95054. Our telephone number at that location is (408) 217-7300. Our website address is www.inphi.com. Information on our website is not part of this report and should not be relied upon in determining whether to make an investment decision. The inclusion of our website address in this report does not include or incorporate by reference into this report any information on our website.

We electronically file our annual reports on Form 10-K, quarterly reports on Form 10-Q and current reports on Form 8-K pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended with the SEC. The public may read or copy any materials we file with the SEC at the SEC’s Public Reference Room at 100 F Street, NE, Washington, DC 20549. The public may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330. The SEC maintains an Internet site that contains reports, proxy and information statements, and other information regarding issuers that file electronically with the SEC. The address of that site is http://www.sec.gov. You may obtain a free copy of our annual reports on Form 10-K, quarterly reports on Form 10-Q and current reports on Form 8-K and amendments to those reports with the SEC on our website.

 

ITEM 1A. RISK FACTORS

Risks Related to Our Business

Our revenue and operating results can fluctuate from period to period, which could cause our share price to fluctuate.

Our revenue and operating results have fluctuated in the past and may fluctuate from period to period in the future due to a variety of factors, many of which are beyond our control. Factors relating to our business that may contribute to these fluctuations include the following factors, as well as other factors described elsewhere in this report:

 

   

the receipt, reduction or cancellation of orders by customers;

 

   

fluctuations in the levels of component inventories held by our customers;

 

   

the gain or loss of significant customers;

 

   

market acceptance of our products and our customers’ products;

 

   

our ability to develop, introduce and market new products and technologies on a timely basis;

 

   

the timing and extent of product development costs;

 

   

new product announcements and introductions by us or our competitors;

 

   

incurrence of research and development and related new product expenditures;

 

   

fluctuations in sales by module manufacturers who incorporate our semiconductor solutions in their products, such as memory modules;

 

   

cyclical fluctuations in our markets;

 

   

fluctuations in our manufacturing yields;

 

   

significant warranty claims, including those not covered by our suppliers;

 

   

changes in our product mix or customer mix;

 

   

intellectual property disputes; and

 

   

loss of key personnel or the inability to attract qualified engineers.

 

12


Table of Contents

As a result of these and other factors, the results of any prior quarterly or annual periods should not be relied upon as indications of our future revenue or operating performance. Fluctuations in our revenue and operating results could cause our share price to decline.

We have an accumulated deficit and have incurred net losses in the past. We may incur net losses in the future.

As of December 31, 2011, we had an accumulated deficit of $32.7 million. We have incurred net losses in each year through 2008. We generated net income of $1.9 million, $26.1 million and $7.3 million for the years ended December 31, 2011, 2010 and 2009, respectively. We may incur net losses in the future.

We depend on a limited number of customers for a substantial portion of our revenue, and the loss of, or a significant reduction in orders from, one or more of our major customers could negatively impact our revenue and operating results. In addition, if we offer more favorable prices to attract or retain customers, our average selling prices and gross margins would decline.

For the year ended December 31, 2011, Samsung and Hynix accounted for 27% and 14% of our total revenue, respectively, and our 10 largest customers collectively accounted for 73% of our total revenue. In addition, sales directly and through distributors to Micron accounted for 11% of our total revenue in the year ended December 31, 2011. Samsung directly accounted for 34% of our total revenue and sales directly and through distributors to Micron accounted for 11% of our total revenue for the year ended December 31, 2010. Some of our customers, including Samsung, Hynix and Micron, use our products primarily in high-speed memory devices. We believe our operating results for the foreseeable future will continue to depend on sales to a relatively small number of customers. In the future, these customers may decide not to purchase our products at all, may purchase fewer products than they did in the past or may alter their purchasing patterns.

In addition, our relationships with some customers may deter other potential customers who compete with these customers from buying our products. To attract new customers or retain existing customers, we may offer these customers favorable prices on our products. In that event, our average selling prices and gross margins would decline. The loss of a key customer, a reduction in sales to any key customer or our inability to attract new significant customers could negatively impact our revenue and materially and adversely affect our results of operations.

We do not have long-term purchase commitments from our customers and if our customers cancel or change their purchase commitments, our revenue and operating results could suffer.

Substantially all of our sales to date, including sales to Samsung, Hynix and Micron, have been made on a purchase order basis. We do not have any long-term commitments with any of our customers. As a result, our customers may cancel, change or delay product purchase commitments with little or no notice to us and without penalty. This in turn could cause our revenue to decline and materially and adversely affect our results of operations.

We may face claims of intellectual property infringement, which could be time-consuming, costly to defend or settle and result in the loss of significant rights and which could harm our relationships with our customers and distributors.

The semiconductor industry is characterized by companies that hold patents and other intellectual property rights and that vigorously pursue, protect and enforce intellectual property rights. From time to time, third parties may assert against us and our customers and distributors their patent and other intellectual property rights to technologies that are important to our business.

Claims that our products, processes or technology infringe third-party intellectual property rights, regardless of their merit or resolution, could be costly to defend or settle and could divert the efforts and attention of our

 

13


Table of Contents

management and technical personnel. For example, Netlist, Inc. filed suit against us in the United States District Court, Central District of California, in September 2009, alleging that our iMB™ and certain other memory module components infringe three of Netlist’s patents. For more details, see Part I, “Item 3, Legal Proceedings.”

Infringement claims also could harm our relationships with our customers or distributors and might deter future customers from doing business with us. We do not know whether we will prevail in these proceedings given the complex technical issues and inherent uncertainties in intellectual property litigation. If any pending or future proceedings result in an adverse outcome, we could be required to:

 

   

cease the manufacture, use or sale of the infringing products, processes or technology;

 

   

pay substantial damages for infringement;

 

   

expend significant resources to develop non-infringing products, processes or technology, which may not be successful;

 

   

license technology from the third-party claiming infringement, which license may not be available on commercially reasonable terms, or at all;

 

   

cross-license our technology to a competitor to resolve an infringement claim, which could weaken our ability to compete with that competitor; or

 

   

pay substantial damages to our customers or end users to discontinue their use of or to replace infringing technology sold to them with non-infringing technology, if available.

Any of the foregoing results could have a material adverse effect on our business, financial condition and results of operations.

Winning business is subject to lengthy competitive selection processes that require us to incur significant expenditures prior to generating any revenue or without any guarantee of any revenue related to this business. Even if we begin a product design, a customer may decide to cancel or change its product plans, which could cause us to generate no revenue from a product. If we fail to generate revenue after incurring substantial expenses to develop our products, our business and operating results would suffer.

We are focused on winning more competitive bid processes, known as “design wins,” that enable us to sell our high-speed analog semiconductor solutions for use in our customers’ products. These selection processes typically are lengthy and can require us to incur significant design and development expenditures and dedicate scarce engineering resources in pursuit of a single customer opportunity. We may not win the competitive selection process and may never generate any revenue despite incurring significant design and development expenditures. Failure to obtain a design win could prevent us from offering an entire generation of a product. This could cause us to lose revenue and require us to write off obsolete inventory, and could weaken our position in future competitive selection processes. Even after securing a design win, we may experience delays in generating revenue from our products as a result of the lengthy development cycle typically required. Our customers generally take a considerable amount of time to evaluate our products. Our design cycle from initial engagement to volume shipment is typically two to three years.

The delays inherent in these lengthy sales cycles increase the risk that a customer will decide to cancel, curtail, reduce or delay its product plans or adopt a competing design from one of our competitors, causing us to lose anticipated revenue. In addition, any delay or cancellation of a customer’s plans could materially and adversely affect our financial results, as we may have incurred significant expense without generating any revenue. Finally, our customers’ failure to successfully market and sell their products could reduce demand for our products and materially and adversely affect our business, financial condition and results of operations. If we were unable to generate revenue after incurring substantial expenses to develop any of our products, our business would suffer.

 

14


Table of Contents

Our customers require our products and our third-party contractors to undergo a lengthy and expensive qualification process which does not assure product sales. If we are unsuccessful in or delayed in qualifying any of our products with a customer, our business and operating results would suffer.

Prior to purchasing our products, our customers require that both our products and our third-party contractors undergo extensive qualification processes, which involve testing of our products in the customers’ systems, as well as testing for reliability. This qualification process may continue for several months. However, qualification of a product by a customer does not assure any sales of the product to that customer. Even after successful qualification and sales of a product to a customer, a subsequent revision in our third party contractors’ manufacturing process or our selection of a new supplier may require a new qualification process with our customers, which may result in delays and in our holding excess or obsolete inventory. After our products are qualified, it can take several months or more before the customer commences volume production of components or systems that incorporate our products. Despite these uncertainties, we devote substantial resources, including design, engineering, sales, marketing and management efforts, to qualifying our products with customers in anticipation of sales. If we are unsuccessful or delayed in qualifying any of our products with a customer, sales of those products to the customer may be precluded or delayed, which may impede our growth and cause our business to suffer.

The complexity of our products could result in undetected defects and we may be subject to warranty claims and product liability, which could result in a decrease in customers and revenue, unexpected expenses and loss of market share. In addition, our product liability insurance may not adequately cover our costs arising from products defects or otherwise.

Our products are sold as components or as modules for use in larger electronic equipment sold by our customers. A product usually goes through an intense qualification and testing period performed by our customers before being used in production. We primarily outsource our product testing to third parties and also perform some testing in our Westlake Village, California, facility. We inspect and test parts, or have them inspected and tested in order to screen out parts that may be weak or potentially suffer a defect incurred through the manufacturing process. From time to time, we are subject to warranty or product liability claims that may require us to make significant expenditures to defend these claims or pay damage awards. For example, in September 2010, we were informed of a claim related to repair and replacement costs in connection with shipments of over 4,000 integrated circuits made by us during the summer and fall of 2009. Of these shipments, approximately 4% were later confirmed or suspected to have random manufacturing process anomalies in the wafer die in the product. Based on our standard warranty provisions, we provided replacement parts to the customer for the known and suspected failures that had occurred. In addition, and without informing us, in the fall of 2009, the customer instituted its own larger scale replacement program that covered the replacement of entire subassemblies in which our product was only one component. In September 2010, the customer made an initial claim for approximately $18 million against us for the costs incurred relative to that program. In June 2011, the customer sent us an email and reduced their initial claim down to $6.6 million. We believe the amount and the basis of the claims are without merit as our warranty liability is contractually limited to the repair or replacement of the affected Inphi products, which, to the extent the customer has requested replacement, has already been completed. A formal claim has yet to be made and discussions with the customer are ongoing. However, claims of this nature are subject to various risks and uncertainties and there can be no assurance that this matter will be resolved without further significant costs to us, including the potential for arbitration or litigation.

Generally, our agreements seek to limit our liability to the replacement of the part or to the revenue received for the product, but these limitations on liability may not be effective or sufficient in scope in all cases. If a customer’s equipment fails in use, the customer may incur significant monetary damages including an equipment recall or associated replacement expenses, as well as lost revenue. The customer may claim that a defect in our product caused the equipment failure and assert a claim against us to recover monetary damages. The process of identifying a defective or potentially defective product in systems that have been widely distributed may be

 

15


Table of Contents

lengthy and require significant resources. We may test the affected product to determine the root cause of the problem and to determine appropriate solutions. We may find an appropriate solution or a temporary fix while a permanent solution is being determined. If we are unable to determine the root cause, find an appropriate solution or offer a temporary fix, we may delay shipment to customers. As a result, we may incur significant replacement costs and contract damage claims from our customers as well as harm to our reputation. In certain situations, circumstances might warrant that we consider incurring the costs or expense related to a recall of one of our products in order to avoid the potential claims that may be raised should the customer reasonably rely upon our product only to suffer a failure due to a design or manufacturing process defect. Defects in our products could harm our relationships with our customers and damage our reputation. Customers may be reluctant to buy our products, which could harm our ability to retain existing customers and attract new customers and our financial results. In addition, the cost of defending these claims and satisfying any arbitration award or judicial judgment with respect to these claims could harm our business prospects and financial condition. Although we carry product liability insurance, this insurance may not adequately cover our costs arising from defects in our products or otherwise.

We rely on our relationships with industry and technology leaders to enhance our product offerings and our inability to continue to develop or maintain such relationships in the future would harm our ability to remain competitive.

We develop many of our semiconductor products for applications in systems that are driven by industry and technology leaders in the communications and computing markets. We also work with OEMs, system manufacturers and standards bodies to define industry conventions and standards within our target markets. We believe these relationships enhance our ability to achieve market acceptance and widespread adoption of our products. If we are unable to continue to develop or maintain these relationships, our semiconductor solutions would become less desirable to our customers, our sales would suffer and our competitive position could be harmed.

If we fail to accurately anticipate and respond to market trends or fail to develop and introduce new or enhanced products to address these trends on a timely basis, our ability to attract and retain customers could be impaired and our competitive position could be harmed.

We operate in industries characterized by rapidly changing technologies and industry standards as well as technological obsolescence. We have developed products that may have long product life cycles of 10 years or more, as well as other products in more volatile high growth or rapidly changing areas, which may have shorter life cycles of only two to three years. We believe that our future success depends on our ability to develop and introduce new technologies and products that generate new sources of revenue to replace, or build upon, existing product revenue streams that may be dependent upon limited product life cycles. If we are not able to repeatedly introduce, in successive years, new products that ship in volume, our revenue will likely not grow and may decline significantly and rapidly. In 2009, we successfully introduced and began to ship a new product in production which we identify as product number INSSTE32882-GS04, or the GS04 product, and which consists of an integrated PLL and register buffer. Sales of the GS04 product comprised 18% and 43% of our total revenue in 2010 and 2009, respectively. In 2010, we also began to ship in production volume a “low voltage” version of our integrated PLL and register buffer, which is shipping in the form of product number INSSTE32882LV-GS02, or the GS02 product. Sales of the GS02 product comprised 38% and 32% of our total revenue in 2011 and 2010, respectively. In 2011, we began to ship in production volume a new “ultra-low voltage” version of our integrated PLL and register buffer, which is shipping in the form of product number INSSTE32882UV-GS02, or the GS02UV product. Sales of the GS02UV product comprised 13% of our total revenue in 2011. There were no other products that generated more than 10% of our total revenue in 2011, 2010 or 2009.

In 2011, the GS04 product matured and as a result, sales of the GS04 product declined. This underscores the importance of the need for us to continually develop and introduce new products to diversify our revenue base as well as generate new revenue to replace and build upon the success of previously introduced products which may be rapidly maturing.

 

16


Table of Contents

To compete successfully, we must design, develop, market and sell new or enhanced products that provide increasingly higher levels of performance and reliability while meeting the cost expectations of our customers. The introduction of new products by our competitors, the delay or cancellation of a platform for which any of our semiconductor solutions are designed, the market acceptance of products based on new or alternative technologies or the emergence of new industry standards could render our existing or future products uncompetitive from a pricing standpoint, obsolete and otherwise unmarketable. Our failure to anticipate or timely develop new or enhanced products or technologies in response to technological shifts could result in decreased revenue and our competitors winning design wins. In particular, we may experience difficulties with product design, manufacturing, marketing or certification that could delay or prevent our development, introduction or marketing of new or enhanced products. Although we believe our products are fully compliant with applicable industry standards, proprietary enhancements may not in the future result in full conformance with existing industry standards under all circumstances. Due to the interdependence of various components in the systems within which our products and the products of our competitors operate, customers are unlikely to change to another design, once adopted, until the next generation of a technology. As a result, if we fail to introduce new or enhanced products that meet the needs of our customers or penetrate new markets in a timely fashion, and our designs do not gain acceptance, we will lose market share and our competitive position, very likely on an extended basis, and operating results will be adversely affected.

If sufficient market demand for 100G solutions does not develop or develops more slowly than expected, or if we fail to accurately predict market requirements or market demand for 100G solutions, our business, competitive position and operating results would suffer.

We are currently investing significant resources to develop semiconductor solutions supporting 100G data transmission rates in order to increase the number of such solutions in our product line. If we fail to accurately predict market requirements or market demand for 100G semiconductor solutions, or if our 100G semiconductor solutions are not successfully developed or competitive in the industry, our business will suffer. If 100G networks are deployed to a lesser extent or more slowly than we currently anticipate, we may not realize any benefits from our investment. As a result, our business, competitive position, market share and operating results would suffer.

Our target markets may not grow or develop as we currently expect and are subject to market risks, any of which could materially harm our business, revenue and operating results.

To date, a substantial portion of our revenue has been attributable to demand for our products in the communications and computing markets and the growth of these overall markets. These markets have fluctuated in size and growth in recent times. Our operating results are impacted by various trends in these markets. These trends include the deployment and broader market adoption of next generation technologies, such as 40 gigabits per second, or Gbps or G, and 100G, in communications and enterprise networks, timing of next generation network upgrades, the introduction and broader market adoption of next generation server platforms, timing of enterprise upgrades and the introduction and deployment of high-speed memory interfaces in computing platforms. We are unable to predict the timing or direction of the development of these markets with any accuracy. For example, we expect that the deployment of different types of memory devices for which our iMB™ product is designed will be substantially dependent on the development of next generation server platforms. We have not generated any significant revenue from our iMB™ product to date, and if the development or adoption of next generation server platforms is delayed, or if these server platforms do not interoperate with memory devices for which our iMB™ product is designed, we may not realize revenue from our iMB™ product. In addition, because some of our products are not limited in the systems or geographic areas in which they may be deployed, we cannot always determine with accuracy how, where or into which applications our products are being deployed. If our target markets do not grow or develop in ways that we currently expect, demand for our semiconductor products may decrease and our business and operating results could suffer.

 

17


Table of Contents

We rely on a limited number of third parties to manufacture, assemble and test our products, and the failure to manage our relationships with our third-party contractors successfully could adversely affect our ability to market and sell our products and our reputation. Our revenue and operating results would suffer if these third parties fail to deliver products or components in a timely manner and at reasonable cost or if manufacturing capacity is reduced or eliminated as we may be unable to obtain alternative manufacturing capacity.

We operate an outsourced manufacturing business model. As a result, we rely on third-party foundry wafer fabrication and assembly and test capacity. We also perform testing in our Westlake Village, California, facility. We generally use a single foundry for the production of each of our various semiconductors. Currently, our principal foundries are GCS, SEDI, TSMC, TowerJazz Semiconductor Ltd., UMS and WIN Semiconductors. We also use third-party contract manufacturers for a significant majority of our assembly and test operations, including Kyocera, Natel, OSE, ASE, Presto, Signetics and STATS ChipPAC.

Relying on third-party manufacturing, assembly and testing presents significant risks to us, including the following:

 

   

failure by us, our customers or their end customers to qualify a selected supplier;

 

   

capacity shortages during periods of high demand;

 

   

reduced control over delivery schedules and quality;

 

   

shortages of materials;

 

   

misappropriation of our intellectual property;

 

   

limited warranties on wafers or products supplied to us; and

 

   

potential increases in prices.

The ability and willingness of our third-party contractors to perform is largely outside our control. If one or more of our contract manufacturers or other outsourcers fails to perform its obligations in a timely manner or at satisfactory quality levels, our ability to bring products to market and our reputation could suffer. For example, if that manufacturing capacity is reduced or eliminated at one or more facilities, including as a response to the recent worldwide decline in the semiconductor industry, or any of those facilities are unable to keep pace with the growth of our business, we could have difficulties fulfilling our customer orders and our revenue could decline. In addition, if these third parties fail to deliver quality products and components on time and at reasonable prices, we could have difficulties fulfilling our customer orders, our revenue could decline and our business, financial condition and results of operations would be adversely affected.

Additionally, as many of our fabrication and assembly and test contractors are located in the Pacific Rim region, principally in Taiwan, our manufacturing capacity may be similarly reduced or eliminated due to natural disasters, political unrest, war, labor strikes, work stoppages or public health crises, such as outbreaks of H1N1 flu. This could cause significant delays in shipments of our products until we are able to shift our manufacturing, assembly or test from the affected contractor to another third-party vendor. There can be no assurance that alternative capacity could be obtained on favorable terms, if at all.

Our costs may increase substantially if the wafer foundries that supply our products do not achieve satisfactory product yields or quality.

The wafer fabrication process is an extremely complicated process where the slightest changes in the design, specifications or materials can result in material decreases in manufacturing yields or even the suspension of production. From time to time, our third-party wafer foundries have experienced, and are likely to experience manufacturing defects and reduced manufacturing yields related to errors or problems in their manufacturing processes or the interrelationship of their processes with our designs. In some cases, our third-party wafer

 

18


Table of Contents

foundries may not be able to detect these defects early in the fabrication process or determine the cause of such defects in a timely manner. We may incur substantial research and development expense for prototype or development stage products as we qualify the products for production.

Generally, in pricing our semiconductors, we assume that manufacturing yields will continue to increase, even as the complexity of our semiconductors increases. Once our semiconductors are initially qualified with our third-party wafer foundries, minimum acceptable yields are established. We are responsible for the costs of the wafers if the actual yield is above the minimum. If actual yields are below the minimum we are not required to purchase the wafers. The minimum acceptable yields for our new products are generally lower at first and increase as we achieve full production. Unacceptably low product yields or other product manufacturing problems could substantially increase the overall production time and costs and adversely impact our operating results on sales of our products. Product yield losses will increase our costs and reduce our gross margin. In addition to significantly harming our operating results and cash flow, poor yields may delay shipment of our products and harm our relationships with existing and potential customers.

We do not have any long-term supply contracts with our contract manufacturers or suppliers, and any disruption in our supply of products or materials could have a material adverse affect on our business, revenue and operating results.

We currently do not have long-term supply contracts with any of our third-party contract manufacturers. We make substantially all of our purchases on a purchase order basis, and our contract manufacturers are not required to supply us products for any specific period or in any specific quantity. We expect that it would take approximately nine to 12 months to transition from our current foundry or assembly services to new providers. Such a transition would likely require a qualification process by our customers or their end customers. We generally place orders for products with some of our suppliers several months prior to the anticipated delivery date, with order volumes based on our forecasts of demand from our customers. Accordingly, if we inaccurately forecast demand for our products, we may be unable to obtain adequate and cost-effective foundry or assembly capacity from our third-party contractors to meet our customers’ delivery requirements, or we may accumulate excess inventories. On occasion, we have been unable to adequately respond to unexpected increases in customer purchase orders and therefore, were unable to benefit from this incremental demand. None of our third-party contract manufacturers have provided any assurance to us that adequate capacity will be available to us within the time required to meet additional demand for our products.

Our foundry vendors and assembly and test vendors may allocate capacity to the production of other companies’ products while reducing deliveries to us on short notice. In particular, other customers that are larger and better financed than us or that have long-term agreements with our foundry vendor or assembly and test vendors may cause our foundry vendor or assembly and test vendors to reallocate capacity to those customers, decreasing the capacity available to us. We do not have long-term supply contracts with our third-party contract manufacturers and if we enter into costly arrangements with suppliers that include nonrefundable deposits or loans in exchange for capacity commitments, commitments to purchase specified quantities over extended periods or investment in a foundry, our operating results could be harmed. We may not be able to make any such arrangement in a timely fashion or at all, and any arrangements may be costly, reduce our financial flexibility, and not be on terms favorable to us. Moreover, if we are able to secure foundry capacity, we may be obligated to use all of that capacity or incur penalties. These penalties may be expensive and could harm our financial results. To date, we have not entered into such arrangements with our suppliers. If we need another foundry or assembly and test subcontractor because of increased demand, or if we are unable to obtain timely and adequate deliveries from our providers, we might not be able to cost effectively and quickly retain other vendors to satisfy our requirements.

 

19


Table of Contents

Many of our customers depend on us as the sole source for a number of our products. If we are unable to deliver these products as the sole supplier or as one of a limited number of suppliers, our relationships with these customers and our business would suffer.

A number of our customers do not have alternative sources for our semiconductor solutions and depend on us as the sole supplier or as one of a limited number of suppliers for these products. Since we outsource our manufacturing to third-party contractors, our ability to deliver our products is substantially dependent on the ability and willingness of our third-party contractors to perform, which is largely outside our control. A failure to deliver our products in sufficient quantities or at all to our customers that depend on us as a sole supplier or as one of a limited number of suppliers may be detrimental to their business and, as a result, our relationship with the customer would be negatively impacted. If we are unable to maintain our relationships with these customers after such failure, our business and financial results may be harmed.

If we are unable to attract, train and retain qualified personnel, particularly our design and technical personnel, we may not be able to execute our business strategy effectively.

Our future success depends on our ability to attract and retain qualified personnel, including our management, sales and marketing, and finance, and particularly our design and technical personnel. We do not know whether we will be able to retain all of these personnel as we continue to pursue our business strategy. Historically, we have encountered difficulties in hiring qualified engineers because there is a limited pool of engineers with the expertise required in our field. Competition for these personnel is intense in the semiconductor industry. As the source of our technological and product innovations, our design and technical personnel represent a significant asset. The loss of the services of one or more of our key employees, especially our key design and technical personnel, or our inability to attract and retain qualified design and technical personnel, could harm our business, financial condition and results of operations.

We may not be able to effectively manage our growth, and we may need to incur significant expenditures to address the additional operational and control requirements of our growth, either of which could harm our business and operating results.

To effectively manage our growth, we must continue to expand our operational, engineering and financial systems, procedures and controls and to improve our accounting and other internal management systems. This may require substantial managerial and financial resources, and our efforts in this regard may not be successful. Our current systems, procedures and controls may not be adequate to support our future operations. If we fail to adequately manage our growth, or to improve our operational, financial and management information systems, or fail to effectively motivate or manage our new and future employees, the quality of our products and the management of our operations could suffer, which could adversely affect our operating results.

We face intense competition and expect competition to increase in the future. If we fail to compete effectively, it could have an adverse effect on our revenue, revenue growth rate, if any, and market share.

The global semiconductor market in general, and the communications and computing markets in particular, are highly competitive. We compete or plan to compete in different target markets to various degrees on the basis of a number of principal competitive factors, including product performance, power budget, features and functionality, customer relationships, size, ease of system design, product roadmap, reputation and reliability, customer support and price. We expect competition to increase and intensify as more and larger semiconductor companies enter our markets. Increased competition could result in price pressure, reduced profitability and loss of market share, any of which could materially and adversely affect our business, revenue and operating results.

Currently, our competitors range from large, international companies offering a wide range of semiconductor products to smaller companies specializing in narrow markets. Our primary competitors include Broadcom Corporation, Hittite Microwave Corporation, Integrated Device Technology, Inc. and Texas

 

20


Table of Contents

Instruments Incorporated, as well as other analog signal processing companies. We expect competition in the markets in which we participate to increase in the future as existing competitors improve or expand their product offerings. In addition, as we develop our 100G semiconductor solution, we may face competition from companies such as Broadcom, Semtech Corp. and Triquint Semiconductor.

Our ability to compete successfully depends on elements both within and outside of our control, including industry and general economic trends. During past periods of downturns in our industry, competition in the markets in which we operate intensified as our customers reduced their purchase orders. Many of our competitors have substantially greater financial and other resources with which to withstand similar adverse economic or market conditions in the future. These developments may materially and adversely affect our current and future target markets and our ability to compete successfully in those markets.

We use a significant amount of intellectual property in our business. Monitoring unauthorized use of our intellectual property can be difficult and costly and if we are unable to protect our intellectual property, our business could be adversely affected.

Our success depends in part upon our ability to protect our intellectual property. To accomplish this, we rely on a combination of intellectual property rights, including patents, copyrights, trademarks and trade secrets in the United States and in selected foreign countries where we believe filing for such protection is appropriate. Effective protection of our intellectual property rights may be unavailable, limited or not applied for in some countries. Some of our products and technologies are not covered by any patent or patent application, as we do not believe patent protection of these products and technologies is critical to our business strategy at this time. A failure to timely seek patent protection on products or technologies generally precludes us from seeking future patent protection on these products or technologies. We cannot guarantee that:

 

   

any of our present or future patents or patent claims will not lapse or be invalidated, circumvented, challenged or abandoned;

 

   

our intellectual property rights will provide competitive advantages to us;

 

   

our ability to assert our intellectual property rights against potential competitors or to settle current or future disputes will not be limited by our agreements with third parties;

 

   

any of our pending or future patent applications will be issued or have the coverage originally sought;

 

   

our intellectual property rights will be enforced in jurisdictions where competition may be intense or where legal protection may be weak;

 

   

any of the trademarks, copyrights, trade secrets or other intellectual property rights that we presently employ in our business will not lapse or be invalidated, circumvented, challenged or abandoned; or

 

   

we will not lose the ability to assert our intellectual property rights against or to license our technology to others and collect royalties or other payments.

In addition, our competitors or others may design around our protected patents or technologies. Effective intellectual property protection may be unavailable or more limited in one or more relevant jurisdictions relative to those protections available in the United States, or may not be applied for in one or more relevant jurisdictions. If we pursue litigation to assert our intellectual property rights, an adverse decision in any of these legal actions could limit our ability to assert our intellectual property rights, limit the value of our technology or otherwise negatively impact our business, financial condition and results of operations.

Monitoring unauthorized use of our intellectual property is difficult and costly. Unauthorized use of our intellectual property may have occurred or may occur in the future. Although we have taken steps to minimize the risk of this occurring, any such failure to identify unauthorized use and otherwise adequately protect our intellectual property would adversely affect our business. Moreover, if we are required to commence litigation,

 

21


Table of Contents

whether as a plaintiff or defendant, not only would this be time-consuming, but we would also be forced to incur significant costs and divert our attention and efforts of our employees, which could, in turn, result in lower revenue and higher expenses.

We also rely on contractual protections with our customers, suppliers, distributors, employees and consultants, and we implement security measures designed to protect our trade secrets. We cannot assure you that these contractual protections and security measures will not be breached, that we will have adequate remedies for any such breach or that our suppliers, employees or consultants will not assert rights to intellectual property arising out of such contracts.

In addition, we have a number of third-party patent and intellectual property license agreements. Some of these license agreements require us to make one-time payments or ongoing royalty payments. We cannot guarantee that the third-party patents and technology we license will not be licensed to our competitors or others in the semiconductor industry. In the future, we may need to obtain additional licenses, renew existing license agreements or otherwise replace existing technology. We are unable to predict whether these license agreements can be obtained or renewed or the technology can be replaced on acceptable terms, or at all.

Average selling prices of our products generally decrease over time, which could negatively impact our revenue and gross margins.

Our operating results may be impacted by a decline in the average selling prices of our semiconductors. If competition increases in our target markets, we may need to reduce the average unit price of our products in anticipation of competitive pricing pressures, new product introductions by us or our competitors and for other reasons. If we are unable to offset any reductions in our average selling prices by increasing our sales volumes or introducing new products with higher margins, our revenue and gross margins will suffer. To maintain our revenue and gross margins, we must develop and introduce new products and product enhancements on a timely basis and continually reduce our costs as well as our customers’ costs. Failure to do so would cause our revenue and gross margins to decline.

We are subject to order and shipment uncertainties, and differences between our estimates of customer demand and product mix and our actual results could negatively affect our inventory levels, sales and operating results.

Our revenue is generated on the basis of purchase orders with our customers rather than long-term purchase commitments. In addition, our customers can cancel purchase orders or defer the shipments of our products under certain circumstances. Our products are manufactured using semiconductor foundries according to our estimates of customer demand, which requires us to make separate demand forecast assumptions for every customer, each of which may introduce significant variability into our aggregate estimates. It is difficult for us to forecast the demand for our products, in part because of the complex supply chain between us and the end-user markets that incorporate our products. Due to our lengthy product development cycle, it is critical for us to anticipate changes in demand for our various product features and the applications they serve to allow sufficient time for product development and design. We have limited visibility into future customer demand and the product mix that our customers will require, which could adversely affect our revenue forecasts and operating margins. Moreover, because some of our target markets are relatively new, many of our customers have difficulty accurately forecasting their product requirements and estimating the timing of their new product introductions, which ultimately affects their demand for our products. Our failure to accurately forecast demand can lead to product shortages that can impede production by our customers and harm our customer relationships. Conversely, our failure to forecast declining demand or shifts in product mix can result in excess or obsolete inventory. For example, some of our customers may cancel purchase orders or delay the shipment of their products that incorporate our products as a result of component shortages they may experience due to the recent earthquakes and tsunami in Japan, or likewise with respect to the recent flooding in Thailand, which may result in excess or obsolete inventory and impact our sales and operating results. In addition, the rapid pace of innovation in our

 

22


Table of Contents

industry could also render significant portions of our inventory obsolete. Excess or obsolete inventory levels could result in unexpected expenses or increases in our reserves that could adversely affect our business, operating results and financial condition. In contrast, if we were to underestimate customer demand or if sufficient manufacturing capacity were unavailable, we could forego revenue opportunities, potentially lose market share and damage our customer relationships. In addition, any significant future cancellations or deferrals of product orders or the return of previously sold products due to manufacturing defects could materially and adversely impact our profit margins, increase our write-offs due to product obsolescence and restrict our ability to fund our operations.

We rely on third-party sales representatives and distributors to assist in selling our products. If we fail to retain or find additional sales representatives and distributors, or if any of these parties fail to perform as expected, it could reduce our future sales.

In 2011, we derived 83% of our total revenue from sales by our direct sales team and third-party sales representatives. In addition, in 2011 and 2010, approximately 17% and 21% of our sales were made through third-party distributors, respectively. Two of our distributors, which sell solely to Micron, accounted for 11% of our total revenue in both 2011 and 2010. We are unable to predict the extent to which these third-party sales representatives and distributors will be successful in marketing and selling our products. Moreover, many of these third-party sales representatives and distributors also market and sell competing products, which may affect the extent to which they promote our products. Even where our relationships are formalized in contracts, our third-party sales representatives and distributors often have the right to terminate their relationships with us at any time. Our future performance will also depend, in part, on our ability to attract additional third-party sales representatives and distributors who will be able to market and support our products effectively, especially in markets in which we have not previously sold our products. If we cannot retain our current distributors or find additional or replacement third-party sales representatives and distributors, our business, financial condition and results of operations could be harmed. Additionally, if we terminate our relationship with a distributor, we may be obligated to repurchase unsold products. We record a reserve for estimated returns and price credits. If actual returns and credits exceed our estimates, our operating results could be harmed.

The facilities of our third-party contractors and distributors are located in regions that are subject to earthquakes and other natural disasters.

The facilities of our third-party contractors and distributors are subject to risk of catastrophic loss due to fire, flood or other natural or man-made disasters. A number of our facilities and those of our contract manufacturers are located in areas with above average seismic activity and also subject to typhoons and other Pacific storms. Several foundries that manufacture our wafers are located in Taiwan, Japan and California, and a majority of our third-party contractors who assemble and test our products are located in Asia. In addition, our headquarters are located in California. The risk of an earthquake in the Pacific Rim region or California is significant due to the proximity of major earthquake fault lines. For example, Japan recently experienced a major earthquake and tsunami. Although we have not received any reports of damage to the foundry we use in Japan, it did experience a temporary suspension of production. If there is a shortage or interruption in the availability to us of any wafers manufactured by this foundry or shortages in other components or materials, and we cannot timely obtain a commercially and technologically suitable substitute or make sufficient and timely design or other product modifications to permit the use of such a substitute, we may not be able to timely deliver sufficient quantities of our products to satisfy our contractual obligations and revenue expectations. In addition, one of our principal packaging and assembly contractors is located in Japan. As a result of the effects of the earthquake and tsunami, this contractor may be unable to ship our products in sufficient quantities or in a timely manner, which could have a material adverse affect on our results of operations. Any further catastrophic loss to any of these facilities would likely disrupt our operations, delay production, shipments and revenue and result in significant expenses to repair or replace the facility. In particular, any catastrophic loss at our California locations would materially and adversely affect our business.

 

23


Table of Contents

We rely on third-party technologies for the development of our products and our inability to use such technologies in the future would harm our ability to remain competitive.

We rely on third parties for technologies that are integrated into our products, such as wafer fabrication and assembly and test technologies used by our contract manufacturers, as well as licensed architecture technologies. If we are unable to continue to use or license these technologies on reasonable terms, or if these technologies fail to operate properly, we may not be able to secure alternatives in a timely manner or at all, and our ability to remain competitive would be harmed. In addition, if we are unable to successfully license technology from third parties to develop future products, we may not be able to develop such products in a timely manner or at all.

Our business would be adversely affected by the departure of existing members of our senior management team and other key personnel.

Our success depends, in large part, on the continued contributions of our senior management team, in particular, the services of certain key personnel, including Dr. Loi Nguyen, one of our founders and our Vice President of Networking, Communications and Multi-Market Products. In February 2011, our Chief Technology Officer resigned and we promoted our Vice President of Engineering for New Business Initiatives to serve as our new Chief Technology Officer. In February 2012, our President and Chief Executive Officer, Young K. Sohn resigned and was succeeded by Ford Tamer. These changes could negatively affect our operations and our relationships with our customers, employees and market leaders. In addition, we have not entered into non-compete agreements with members of our senior management team. The loss of any member of our senior management team or key personnel could harm our ability to implement our business strategy and respond to the rapidly changing market conditions in which we operate.

Potential future acquisitions could be difficult to integrate, divert attention of key personnel, disrupt our business, dilute stockholder value and impair our operating results.

As part of our business strategy, we have pursued and may continue to pursue acquisitions in the future that we believe will complement our business, semiconductor solutions or technologies. For example, in 2010, we acquired all of the outstanding shares of Winyatek Technology Inc., a Taiwanese company. Any acquisition involves a number of risks, many of which could harm our business, including:

 

   

difficulties in integrating the operations, technologies, products, existing contracts, accounting and personnel of the target company;

 

   

realizing the anticipated benefits of any acquisition;

 

   

difficulties in transitioning and supporting customers, if any, of the target company;

 

   

diversion of financial and management resources from existing operations;

 

   

the price we pay or other resources that we devote may exceed the value we realize, or the value we could have realized if we had allocated the purchase price or other resources to another opportunity;

 

   

potential loss of key employees, customers and strategic alliances from either our current business or the target company’s business;

 

   

assumption of unanticipated problems or latent liabilities, such as problems with the quality of the target company’s products;

 

   

inability to generate sufficient revenue to offset acquisition costs;

 

   

dilutive effect on our stock as a result of any equity-based acquisitions;

 

   

inability to successfully complete transactions with a suitable acquisition candidate; and

 

   

in the event of international acquisitions, risks associated with accounting and business practices that are different from applicable U.S. practices and requirements.

 

24


Table of Contents

Acquisitions also frequently result in the recording of goodwill and other intangible assets that are subject to potential impairments, which could harm our financial results. As a result, if we fail to properly evaluate acquisitions or investments, we may not achieve the anticipated benefits of any such acquisitions, and we may incur costs in excess of what we anticipate. The failure to successfully evaluate and execute acquisitions or investments or otherwise adequately address these risks could materially harm our business and financial results.

Our portfolio of marketable securities is significant and subject to market, interest and credit risk that may reduce its value.

We maintain a significant portfolio of marketable securities. Changes in the value of this portfolio could adversely affect our earnings. In particular, the value of our investments may decline due to increases in interest rates, downgrades of money market funds, U.S. Treasuries, municipal bonds, corporate bonds, commercial paper, certificates of deposit, variable rate demand notes and asset backed securities included in our portfolio, instability in the global financial markets that reduces the liquidity of securities included in our portfolio, declines in the value of collateral underlying the asset-backed securities included in our portfolio and other factors. Each of these events may cause us to record charges to reduce the carrying value of our investment portfolio or sell investments for less than our acquisition cost. Although we attempt to mitigate these risks by investing in high quality securities and continuously monitoring our portfolio’s overall risk profile, the value of our investments may nevertheless decline.

Tax benefits that we receive may be terminated or reduced in the future, which would increase our costs.

In 2010, we began to expand our international presence to take advantage of the opportunity to recruit additional engineering design talent, as well as to more closely align our operations geographically with our customers and suppliers in Asia. In certain international jurisdictions, we have also entered into agreements with local governments to provide us with, among other things, favorable local tax rates if certain minimum criteria are met. These agreements may require us to meet several requirements as to investment, headcount and activities to retain this status. We currently believe that we will be able to meet all the terms and conditions specified in these agreements. However, if adverse changes in the economy or changes in technology affect international demand for our products in an unforeseen manner or if we fail to otherwise meet the conditions of the local agreements, we may be subject to additional taxes, which in turn would increase our costs.

Changes in our effective tax rate may harm our results of operations. A number of factors may increase our future effective tax rates, including:

 

   

the jurisdictions in which profits are determined to be earned and taxed;

 

   

the resolution of issues arising from tax audits with various tax authorities;

 

   

changes in the valuation of our deferred tax assets and liabilities and in deferred tax valuation allowances;

 

   

changes in the value of assets or services transferred or provided from one jurisdiction to another;

 

   

adjustments to income taxes upon finalization of various tax returns;

 

   

increases in expenses not deductible for tax purposes, including write-offs of acquired in-process research and development and impairments of goodwill in connection with acquisitions;

 

   

changes in available tax credits;

 

   

changes in tax laws or the interpretation of such tax laws, and changes in U.S. generally accepted accounting principles; and

 

   

a decision to repatriate non-U.S. earnings for which we have not previously provided for U.S. taxes.

 

25


Table of Contents

We are subject to additional regulatory compliance requirements, including Section 404 of the Sarbanes-Oxley Act of 2002, as a result of being a public company and our management has limited experience managing a public company.

As a public company, we will incur significant legal, accounting and other expenses that we did not incur as a private company. Our management team and other personnel will need to devote a substantial amount of time to new compliance initiatives and we may not successfully or efficiently manage our transition into a public company. We expect rules and regulations such as the Sarbanes-Oxley Act of 2002 to increase our legal and finance compliance costs and to make some activities more time-consuming and costly. We will need to hire a number of additional employees with public accounting and disclosure experience in order to meet our ongoing obligations as a public company. For example, Section 404 of the Sarbanes-Oxley Act of 2002 requires that our management report on, and our independent registered public accounting firm attest to, the effectiveness of our internal control over financial reporting in our annual report on Form 10-K for the fiscal year ended December 31, 2011. Section 404 compliance may divert internal resources and will take a significant amount of time and effort to complete. If we fail to do so, or if in the future our Chief Executive Officer, Chief Financial Officer or independent registered public accounting firm determines that our internal controls over financial reporting are not effective as defined under Section 404, we could be subject to sanctions or investigations by The New York Stock Exchange, or NYSE, the Securities and Exchange Commission, or the SEC, or other regulatory authorities. Furthermore, investor perceptions of our company may suffer, and this could cause a decline in the market price of our stock. Irrespective of compliance with Section 404, any failure of our internal controls could have a material adverse effect on our stated results of operations and harm our reputation. If we are unable to implement these changes effectively or efficiently, it could harm our operations, financial reporting or financial results and could result in an adverse opinion on internal controls from our independent auditors.

Our insiders who are significant stockholders may control the election of our board and may have interests that conflict with those of other stockholders.

Our directors and executive officers, together with members of their immediate families and affiliated funds, beneficially owned, in the aggregate, more than 22% of our outstanding capital stock as of December 31, 2011. In addition, entities affiliated with Walden International and Tallwood I, L.P. beneficially owned 11.2% and 5.3%, respectively, of our outstanding capital stock as of December 31, 2011. Lip-Bu Tan and Diosdado Banatao, who are affiliated with Walden International and Tallwood I, L.P., respectively, are currently two of the seven members of our board of directors. As a result, acting together, this group has the ability to exercise significant control over most matters requiring our stockholders’ approval, including the election and removal of directors and significant corporate transactions.

Risks Related to Our Industry

We may be unable to make the substantial and productive research and development investments which are required to remain competitive in our business.

The semiconductor industry requires substantial investment in research and development in order to develop and bring to market new and enhanced technologies and products. Many of our products originated with our research and development efforts and have provided us with a significant competitive advantage. Our research and development expense was $28.6 million in 2011, $23.8 million in 2010 and $17.8 million in 2009. We are committed to investing in new product development in order to remain competitive in our target markets. We do not know whether we will have sufficient resources to maintain the level of investment in research and development required to remain competitive. In addition, we cannot assure you that the technologies which are the focus of our research and development expenditures will become commercially successful.

 

26


Table of Contents

Our business, financial condition and results of operations could be adversely affected by worldwide economic conditions, as well as political and economic conditions in the countries in which we conduct business.

Our business and operating results are impacted by worldwide economic conditions, including the current European debt crisis. Uncertainty about current global economic conditions may cause businesses to continue to postpone spending in response to tighter credit, unemployment or negative financial news. This in turn could have a material negative effect on the demand for our semiconductor products or the products into which our semiconductors are incorporated. Although the United States economy has recently shown signs of recovery, the strength and duration of any economic recovery will be impacted by the European debt crisis and the reaction to any efforts to address the crisis. Multiple factors relating to our international operations and to particular countries in which we operate could negatively impact our business, financial condition and results of operations. These factors include:

 

   

changes in political, regulatory, legal or economic conditions;

 

   

restrictive governmental actions, such as restrictions on the transfer or repatriation of funds and foreign investments and trade protection measures, including export duties and quotas and customs duties and tariffs;

 

   

disruptions of capital and trading markets;

 

   

changes in import or export requirements;

 

   

transportation delays;

 

   

civil disturbances or political instability;

 

   

geopolitical turmoil, including terrorism, war or political or military coups;

 

   

public health emergencies;

 

   

differing employment practices and labor standards;

 

   

limitations on our ability under local laws to protect our intellectual property;

 

   

local business and cultural factors that differ from our customary standards and practices;

 

   

nationalization and expropriation;

 

   

changes in tax or intellectual property laws;

 

   

currency fluctuations relating to our international operating activities; and

 

   

difficulty in obtaining distribution and support.

A significant portion of our products are manufactured, assembled and tested outside the United States. Any conflict or uncertainty in these countries, including due to natural disasters, public health concerns, political unrest or safety concerns, could harm our business, financial condition and results of operations. In addition, if the government of any country in which our products are manufactured or sold sets technical standards for products manufactured in or imported into their country that are not widely shared, it may lead some of our customers to suspend imports of their products into that country, require manufacturers in that country to manufacture products with different technical standards and disrupt cross-border manufacturing relationships which, in each case, could harm our business.

Changes in current or future laws or regulations or the imposition of new laws or regulations, including new or changed tax regulations, environmental laws and export control laws, or new interpretations thereof, by federal or state agencies or foreign governments could impair our ability to compete in international markets.

Changes in current laws or regulations applicable to us or the imposition of new laws and regulations in the United States or other jurisdictions in which we do business, such as China, Japan, Korea, Singapore and Taiwan,

 

27


Table of Contents

could materially and adversely affect our business, financial condition and results of operations. For example, we have entered into agreements with local governments to provide us with, among other things, favorable local tax rates if certain minimum criteria are met, as discussed in our risk factor entitled “Tax benefits that we received may be terminated or reduced in the future, which would increase our costs.” These agreements may require us to meet several requirements as to investment, headcount and activities to retain this status. If we fail to otherwise meet the conditions of the local agreements, we may be subject to additional taxes, which in turn would increase our costs. In addition, potential future U.S. tax legislation could impact the tax benefits we effectively realize under these agreements.

Due to environmental concerns, the use of lead and other hazardous substances in electronic components and systems is receiving increased attention. In response, the European Union passed the Restriction on Hazardous Substances, or RoHS, Directive, legislation that limits the use of lead and other hazardous substances in electrical equipment. The RoHS Directive became effective July 1, 2006. We believe that our current product designs and material supply chains are in compliance with the RoHS Directive. If our product designs or material supply chains are deemed not to be in compliance with the RoHS Directive, we and our third party manufacturers may need to redesign products with components meeting the requirements of the RoHS Directive and we may incur additional expense as well as loss of market share and damage to our reputation.

In addition, we are subject to export control laws, regulations and requirements that limit which products we sell and where and to whom we sell our products. In some cases, it is possible that export licenses would be required from U.S. government agencies for some of our products in accordance with the Export Administration Regulations and the International Traffic in Arms Regulations. We may not be successful in obtaining the necessary export licenses in all instances. Any limitation on our ability to export or sell our products imposed by these laws would adversely affect our business, financial condition and results of operations. In addition, changes in our products or changes in export and import laws and implementing regulations may create delays in the introduction of new products in international markets, prevent our customers from deploying our products internationally or, in some cases, prevent the export or import of our products to certain countries altogether. While we are not aware of any other current or proposed export or import regulations which would materially restrict our ability to sell our products in countries such as China, Japan, Korea, Singapore or Taiwan, any change in export or import regulations or related legislation, shift in approach to the enforcement or scope of existing regulations, or change in the countries, persons or technologies targeted by these regulations, could result in decreased use of our products by, or in our decreased ability to export or sell our products to, existing or potential customers with international operations. In such event, our business and results of operations could be adversely affected.

We are subject to the cyclical nature of the semiconductor industry, which has suffered and may suffer from future recessionary downturns.

The semiconductor industry is highly cyclical and is characterized by constant and rapid technological change, rapid product obsolescence and price erosion, evolving standards and wide fluctuations in product supply and demand. The industry experienced a significant downturn during the current global recession. These downturns have been characterized by diminished product demand, production overcapacity, high inventory levels and accelerated erosion of average selling prices. The most recent downturn and any future downturns could negatively impact our business and operating results. Furthermore, any upturn in the semiconductor industry could result in increased competition for access to third-party foundry and assembly capacity. We are dependent on the availability of this capacity to manufacture and assemble our integrated circuits. None of our third-party foundry or assembly contractors has provided assurances that adequate capacity will be available to us in the future.

Our products must conform to industry standards in order to be accepted by end users in our markets.

Our products comprise only a part of larger electronic systems. All components of these systems must uniformly comply with industry standards in order to operate efficiently together. These industry standards are

 

28


Table of Contents

often developed and promoted by larger companies who are industry leaders and provide other components of the systems in which our products are incorporated. In driving industry standards, these larger companies are able to develop and foster product ecosystems within which our products can be used. We work with a number of these larger companies in helping develop industry standards with which our products are compatible. If larger companies do not support the same industry standards that we do, or if competing standards emerge, market acceptance of our products could be adversely affected, which would harm our business.

Some industry standards may not be widely adopted or implemented uniformly, and competing standards may still emerge that may be preferred by our customers. Products for communications and computing applications are based on industry standards that are continually evolving. Our ability to compete in the future will depend on our ability to identify and ensure compliance with these evolving industry standards. The emergence of new industry standards could render our products incompatible with products developed by other suppliers or make it difficult for our products to meet the requirements of certain OEMs. As a result, we could be required to invest significant time and effort and to incur significant expense to redesign our products to ensure compliance with relevant standards. If our products are not in compliance with prevailing industry standards for a significant period of time, we could miss opportunities to achieve crucial design wins. We may not be successful in developing or using new technologies or in developing new products or product enhancements that achieve market acceptance. Our pursuit of necessary technological advances may require substantial time and expense.

Risks Related to our Common Stock

The trading price and volume of our common stock is subject to price volatility.

The trading price of our common stock has experienced wide fluctuations. For example, since our initial public offering the closing price of our common stock has ranged from $7.20 to $26.63. Volatility in the market price of our common stock may occur in the future. The market price of shares of our common stock could be subject to wide fluctuations in response to many risk factors listed in this report and others beyond our control, including:

 

   

actual or anticipated fluctuations in our financial condition and operating results;

 

   

changes in the economic performance or market valuations of other companies that provide high-speed analog semiconductor solutions;

 

   

loss of a significant amount of existing business;

 

   

actual or anticipated changes in our growth rate relative to our competitors;

 

   

actual or anticipated fluctuations in our competitors’ operating results or changes in their growth rates;

 

   

issuance of new or updated research or reports by securities analysts;

 

   

our announcement of actual results for a fiscal period that are higher or lower than projected results or our announcement of revenue or earnings guidance that is higher or lower than expected;

 

   

regulatory developments in our target markets affecting us, our customers or our competitors;

 

   

fluctuations in the valuation of companies perceived by investors to be comparable to us;

 

   

share price and volume fluctuations attributable to inconsistent trading volume levels of our shares;

 

   

sales or expected sales of additional common stock;

 

   

terrorist attacks or natural disasters or other such events impacting countries where we or our customers have operations; and

 

   

general economic and market conditions.

Furthermore, the stock markets have experienced extreme price and volume fluctuations that have affected and continue to affect the market prices of equity securities of many companies. These fluctuations often have

 

29


Table of Contents

been unrelated or disproportionate to the operating performance of those companies. These broad market and industry fluctuations, as well as general economic, political and market conditions such as recessions, interest rate changes or international currency fluctuations, may cause the market price of shares of our common stock to decline. In the past, companies that have experienced volatility in the market price of their stock have been subject to securities class action litigation. We may be the target of this type of litigation in the future. Securities litigation against us could result in substantial costs and divert our management’s attention from other business concerns, which could seriously harm our business.

If securities or industry analysts do not publish research or reports about our business, or if they change their recommendations regarding our stock adversely, our stock price and trading volume could decline.

The trading market for our common stock will be influenced by the research and reports that industry or securities analysts publish about us or our business. If one or more of the analysts who cover us downgrade our stock, our stock price would likely decline. If one or more of these analysts cease coverage of our company or fail to regularly publish reports on us, we could lose visibility in the financial markets, which in turn could cause our stock price or trading volume to decline.

Substantial future sales of our common stock in the public market could cause our stock price to fall.

Sales of our common stock in the public market or the perception that sales could occur, could cause the market price of our common stock to decline. As of December 31, 2011, we had 27,882,223 shares of common stock outstanding, of which 19,982,223 shares are only eligible for sale upon vesting and subject to the requirements of Rule 144 and trading black-out periods. As resale and other restrictions on these shares end, the market price of our common stock could decline if the holders of these shares sell them or are perceived by the market as intending to sell them.

We may not be able to obtain capital when desired on favorable terms, if at all, or without dilution to our stockholders and our failure to raise capital when needed could prevent us from executing our growth strategy.

We believe that our existing cash and cash equivalents, investments in marketable securities, and cash flows from our operating activities, will be sufficient to meet our anticipated cash needs for at least the next 12 to 18 months. We operate in an industry, however, that makes our prospects difficult to evaluate. It is possible that we may not generate sufficient cash flow from operations or otherwise have the capital resources to meet our future capital needs. If this occurs, we may need additional financing to execute on our current or future business strategies, including to:

 

   

invest in our research and development efforts by hiring additional technical and other personnel;

 

   

expand our operating infrastructure;

 

   

acquire complementary businesses, products, services or technologies; or

 

   

otherwise pursue our strategic plans and respond to competitive pressures.

If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly-issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operational flexibility, and would also require us to incur interest expense. We have not made arrangements to obtain additional financing and there is no assurance that additional financing will be available on terms favorable to us, or at all. If adequate funds are not available or are not available on acceptable terms, if and when needed, our ability to fund our operations, take advantage of unanticipated opportunities, develop or enhance our products, or otherwise respond to competitive pressures could be significantly limited.

 

30


Table of Contents

Delaware law and our corporate charter and bylaws contain anti-takeover provisions that could delay or discourage takeover attempts that stockholders may consider favorable.

Provisions in our certificate of incorporation and bylaws, may have the effect of delaying or preventing a change of control or changes in our management. These provisions include the following:

 

   

the right of our board of directors to elect a director to fill a vacancy created by the expansion of our board of directors;

 

   

the classification of our board of directors so that only a portion of our directors are elected each year, with each director serving a three-year term;

 

   

the requirement for advance notice for nominations for election to our board of directors or for proposing matters that can be acted upon at a stockholders’ meeting;

 

   

the ability of our board of directors to alter our bylaws without obtaining stockholder approval;

 

   

the ability of our board of directors to issue, without stockholder approval, up to 10,000,000 shares of preferred stock with rights set by our board of directors, which rights could be senior to those of common stock;

 

   

the required approval of holders of at least two-thirds of the shares entitled to vote at an election of directors to adopt, amend or repeal our bylaws or amend or repeal the provisions of our certificate of incorporation regarding the election and removal of directors and the ability of stockholders to take action by written consent; and

 

   

the elimination of the right of stockholders to call a special meeting of stockholders and to take action by written consent.

In addition, because we are incorporated in Delaware, we are governed by the provisions of Section 203 of the Delaware General Corporation Law. These provisions may prohibit or restrict large stockholders, in particular those owning 15% or more of our outstanding voting stock, from merging or combining with us. These provisions in our certificate of incorporation and bylaws and under Delaware law could discourage potential takeover attempts and could reduce the price that investors might be willing to pay for shares of our common stock in the future and result in our market price being lower than it would without these provisions.

We do not currently intend to pay dividends on our common stock and, consequently, your ability to achieve a return on your investment will depend on appreciation in the price of our common stock.

We have never declared or paid any cash dividends on our common stock and do not currently intend to do so for the foreseeable future. We currently intend to invest our future earnings, if any, to fund our growth. Therefore, you are not likely to receive any dividends on your common stock for the foreseeable future and the success of an investment in shares of our common stock will depend upon any future appreciation in their value. There is no guarantee that shares of our common stock will appreciate in value or even maintain the price at which our stockholders have purchased their shares.

 

ITEM 1B. UNRESOLVED STAFF COMMENTS

None.

 

ITEM 2. PROPERTIES

We currently lease our principal executive office in Santa Clara, California, under a lease for 14,578 square feet of office space that expires in July 31, 2015. We also lease 29,090 square feet of office space in Westlake

 

31


Table of Contents

Village, California under a lease that expires on December 31, 2016. Our Singapore subsidiary currently leases 2,368 square feet of office space in Singapore under a lease that expires on March 14, 2014. Our United Kingdom subsidiary currently leases office space in Northamptonshire, England under a lease that expires on September 30, 2013. We also lease 8,540 square feet of office space in Hsinchu, Taiwan under a lease that we let expire on February 29, 2012. We believe that current facilities, taking into account the expiration of our lease in Taiwan, are sufficient to meet our needs for the foreseeable future. For additional information regarding our obligations under property leases, see Note 16 of Notes to Consolidated Financial Statements, included in Part II, “Item 8, Financial Statements and Supplementary Data”.

 

ITEM 3. LEGAL PROCEEDINGS

We are currently a party to the following legal proceedings:

Netlist, Inc. v. Inphi Corporation, Case No. 09-cv-6900 (C.D. Cal.)

On September 22, 2009, Netlist filed suit in the United States District Court, Central District of California, or the Court, asserting that we infringe U.S. Patent No. 7,532,537. Netlist filed an amended complaint on December 22, 2009, further asserting that we infringe U.S. Patent Nos. 7,619,912 and 7,636,274, collectively with U.S. Patent No. 7,532,537, the patents-in-suit, and seeking both unspecified monetary damages to be determined and an injunction to prevent further infringement. These infringement claims allege that our iMB™ and certain other memory module components infringe the patents-in-suit. We answered the amended complaint on February 11, 2010 and asserted that we do not infringe the patents-in-suit and that the patents-in-suit are invalid. In 2010, we filed requests for Inter Partes Reexamination with the United States Patent and Trademark Office (the “USPTO”), asserting that the patents-in-suit are invalid.

On August 27, 2010, the USPTO ordered the request for Inter Partes Reexamination for U.S. Patent No. 7,636,274 and found a substantial new question of patentability based upon each of the different issues that we raised as the reexamination requestor. On September 27, 2011, the Patent Office issued a First Office Action based on the Netlist ‘274 Patent Reexamination Request and rejected 91 of its 97 claims. On October 27, 2011, Netlist responded to the USPTO determination by amending some but not all of the claims, adding new claims and making arguments as to the validity of the rejected claims in view of the cited references. We provided rebuttable comments to the USPTO on November 28, 2011. The proceeding is expected to continue in accordance with established Inter Partes Reexamination procedures, with a further communication from the USPTO expected as the next substantive step.

On September 8, 2010, the USPTO ordered the request for Inter Partes Reexamination for U.S. Patent No. 7,532,537 and found a substantial new question of patentability based upon different issues that we raised as the reexamination requestor. The USPTO accompanied this Reexamination Order of U.S. Patent No. 7,532,537 with its own evaluation of the validity of this patent, and rejected some but not all of claims. In a response dated October 8, 2010, Netlist responded to the USPTO determination by amending some but not all of the claims, adding new claims and making arguments as to why the claims were not invalid in view of the cited references. We provided rebuttable comments to the USPTO on November 8, 2010 along with a Petition requesting an increase in the number of allowed pages of the rebuttable comments. On January 20, 2011, the USPTO granted the Petition in part. We then filed updated rebuttal comments on January 27, 2011 in compliance with the granted Petition. The USPTO has considered these updated rebuttal comments, and in a communication dated June 15, 2011, continued to reject all the previously rejected claims. The USPTO also rejected all the claims newly added in the October 8, 2010 Netlist response. In a further communication dated June 21, 2011, the USPTO issued an Action Closing Prosecution indicating that it would confirm the patentability of four claims and reject all the other pending claims. On August 22, 2011, Netlist responded to the Action Closing Prosecution by further amending some claims and making arguments as to the validity of the rejected claims in view of the cited references. We submitted rebuttal comments on September 21, 2011. In a further communication dated February 7, 2012, the USPTO issued a Right of Appeal Notice, which also indicated that the previous

 

32


Table of Contents

amendments to claim made by Netlist would be entered, and that the currently pending claims, as amended, were patentable. The proceeding is expected to continue in accordance with established Inter Partes Reexamination procedures, with the parties being able to file a notice of appeal as the next substantive step.

On September 8, 2010, the USPTO ordered the request for Inter Partes Reexamination for U.S. Patent No. 7,619,912 and found a substantial new question of patentability based upon different issues that we raised as the reexamination requestor. The USPTO accompanied this Reexamination Order of U.S. Patent No. 7,619,912 with its own evaluation of the validity of this patent and initially determined that all of the claims were patentable based upon our request for Inter Partes Reexamination. Netlist did not comment upon this Reexamination Order. The USPTO on February 28, 2011 also merged the Proceedings of the Reexamination of U.S. Patent No. 7,619,912, bearing Control No. 90/001,339 with Inter Partes Reexamination Proceeding 95/000,578 filed October 20, 2010 on behalf of SMART Modular Technologies, Inc. and Inter Partes Reexamination Proceeding 95/000,579 filed October 21, 2010 on behalf of Google, Inc. In each of these other Reexamination Proceedings, the USPTO had indicated that there existed a substantial new question of patentability with respect to certain claims of U.S. Patent No. 7,619,912, but had not accompanied the Reexamination Orders related thereto with its own evaluation of the validity of this patent, indicating that such evaluation would be forthcoming at a later time. This further evaluation was received in an Office Action dated April 4, 2011, in which the Examiner rejected a substantial majority of the claims based upon a number of different rejections, including certain of the rejections originally proposed by us in its Request for Reexamination. This Office Action also indicated that one claim was deemed to be patentable over the prior art of record in the merged Reexamination Proceedings. After seeking and obtaining an extension of time to respond to the Office Action dated April 4, 2011, Netlist served its response on July 5, 2011, which added new claims and made arguments as to why the originally filed claims were not invalid in view of the cited references. Each of the merged Reexamination Requestors, including us, submitted rebuttal comments by August 29, 2011. The USPTO considered this Netlist response and each of the rebuttal comments, and in an Office Action dated October 14, 2011, continued to reject most, but not all of the previously rejected claims, as well as rejected claims that had been added by Netlist in its July 5, 2011 response. After seeking and obtaining an extension of time to respond to the Office Action dated October 14, 2011, Netlist served its response on January 13, 2012, which response made amendments based upon subject matter that had been indicated as allowable in the Office Action dated October 14, 2011, added other new claims and made arguments as to why all of these claims should be allowed. Two of the three merged Reexamination Requestors, including us, submitted rebuttal comments on February 13, 2012. The merged Reexamination Proceeding will be conducted in accordance with established procedures for merged Reexamination Proceedings, with the last of the merged Reexamination Requestors submitting its rebuttal comments, and then a further communication from the USPTO expected as the next substantive steps.

The reexamination proceedings could result in a determination that the patents-in-suit, in whole or in part, are valid or invalid, as well as modifications of the scope of the patents-in-suit.

A third party, Sanmina-SCI Corporation, or SSC, has also requested interference proceedings with the USPTO with respect to each of the patents-in-suit. In its April 21, 2010 Request for Continued Examination of U.S. Application No. 11/142,989 (“SSC ‘989 patent application”), SSC asserted that it has priority to the inventions claimed by the patents-in-suit and should be granted rights to those inventions. We have entered into an agreement with SSC for a non-exclusive license to those rights, if any, that SSC may obtain to the inventions claimed by the patents-in-suit if the USPTO agrees to commence interference proceedings and if SSC prevails in those proceedings.

The USPTO, in a communication dated July 7, 2010, acknowledged that claims were submitted in a filing made in the SSC ‘989 patent application to invoke an Interference with each of the patents-in-suit, but has declined to declare an Interference at this time. The July 7, 2010 USPTO communication rejected the claims submitted to invoke the Interference based upon 35 USC 112, with the rejection asserting that these claims contain “subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor(s), at the time the application was filed, had possession of the claimed

 

33


Table of Contents

invention.” SSC responded to this USPTO communication on December 24, 2010 and provided an updated response on March 23, 2011 to comply with formalities noted by the USPTO. The USPTO, in a communication dated June 8, 2011, continued to reject the claims submitted to invoke the interference based upon the previously made rejections. SSC responded to this USPTO communication on December 8, 2011 and currently awaits further correspondence from the USPTO.

In connection with the reexamination requests and the interference proceedings, we also filed a motion to stay proceedings with the Court, which was granted on May 18, 2010, whereby the Court stayed the proceedings until at least February 14, 2011, requested that Netlist notify the Court within one week of any action taken by the USPTO in connection with the reexamination or interference proceedings, and requested that the parties file papers by January 31, 2011 stating their position on whether the stay should be extended. We filed our paper on January 31, 2011 stating the reasons it believed the stay should be maintained and Netlist, having been given leave to file its paper later, filed its paper on February 21, 2011. Based on these papers the Court ordered a continued stay of the proceedings until at least February 24, 2012 and requested that the parties file papers by January 30, 2012 stating their position on whether the stay should be extended, and continued the request that Netlist notify the Court within one week of any action taken by the USPTO in connection with the reexamination or interference proceedings. Each of the parties filed its paper on January 30, 2012 stating its positions with respect to the stay, and based on these papers the Court ordered a continued stay of the proceedings until the conclusion of the reexamination and interference proceedings, and in the meantime requested that the parties file papers by January 30, 2013 stating their position on whether the stay should be extended. At this time, the Court could decide to maintain or lift the stay.

While we intend to defend the lawsuit vigorously, litigation, whether or not determined in our favor or settled, could be costly and time-consuming and could divert our attention and resources, which could adversely affect our business. We are unable to assess the possible outcome of these matters. However, because of the nature and inherent uncertainties of litigation, should the outcome of these actions be unfavorable, our business, financial condition, results of operations or cash flows could be materially and adversely affected.

We are not currently a party to any other material litigation. The semiconductor industry is characterized by frequent claims and litigation, including claims regarding patent and other intellectual property rights as well as improper hiring practices. We may from time to time become involved in litigation relating to claims arising from our ordinary course of business. These claims, even if not meritorious, could result in the expenditure of significant financial and managerial resources.

 

ITEM 4. MINE SAFETY DISCLOSURES

Not applicable.

 

34


Table of Contents

PART II

 

ITEM 5. MARKET FOR REGISTRANT’S COMMON EQUITY, RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES

Market for Registrant’s Common Equity

Our common stock is traded on the New York Stock Exchange under the symbol “IPHI” and has been since our initial public offering on November 11, 2010. Prior to that date, our common stock was not traded on any public exchange. The following table sets forth the range of high and low sales prices for our common stock in each quarter since our stock began trading:

 

2011

   Low      High  

Fourth Quarter

   $ 7.71       $ 12.72   

Third Quarter

     7.12         18.05   

Second Quarter

     16.06         22.61   

First Quarter

     16.91         26.67   

2010

   Low      High  

Fourth Quarter (from November 11, 2010)

   $ 14.73       $ 20.94   

As of February 28, 2012, we had approximately 68 holders of record of our common stock. This number does not include the number of persons whose shares are in nominee or in “street name” accounts through brokers.

We have never declared or paid any cash dividends on shares of our capital stock. We expect to retain all of our earnings to finance the expansion and development of our business and we do not currently intend to pay any cash dividends on our capital stock in the foreseeable future. Our board of directors will determine future dividends, if any.

Director and Executive Officers have currently and may from time to time in the future, establish pre-set trading plans in accordance with Rule 10b5-1 promulgated under the Securities Exchange Act of 1934.

Securities Authorized for Issuance under Equity Compensation Plans

Information regarding the securities authorized for issuance under our equity compensation plans can be found under Part III, “Item 12, Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters”.

Share Performance Graph

The following information is not deemed to be “soliciting material” or to be “filed” with the Securities and Exchange Commission or subject to Regulation 14A or 14C under the Securities Exchange Act of 1934 or to the liabilities of Section 18 of the Securities Exchange Act of 1934, and will not be deemed to be incorporated by reference into any filing under the Securities Act of 1933 or the Securities Exchange Act of 1934, except to the extent we specifically incorporate it by reference into such a filing.

Set forth below is a line graph showing the cumulative total stockholder return (change in stock price plus reinvested dividends) assuming the investment of $100 on November 11, 2010 (the day of our initial public offering) in each of our common stock, the S&P 500 Index and PHLX Semiconductor Index for the period commencing on November 11, 2010 and ending on December 31, 2011. The comparisons in the table are required by the Securities and Exchange Commission and are not intended to forecast or be indicative of future performance of our common stock

 

35


Table of Contents

 

LOGO

 

36


Table of Contents
ITEM 6. SELECTED CONSOLIDATED FINANCIAL DATA

The following selected consolidated financial data should be read together with Part II, “Item 7., Management’s Discussion and Analysis of Financial Condition and Results of Operations” and our consolidated financial statements and related notes included elsewhere in this report. The selected balance sheet data as of December 31, 2011 and 2010, and the selected statements of operations data for each of the years ended December 31, 2011, 2010 and 2009, have been derived from our audited financial statements included elsewhere in this report. The selected balance sheet data as of December 31, 2009, 2008 and 2007 and the selected statements of operations data for the years ended December 31, 2008 and 2007 have been derived from our audited financial statements not included in this report. Historical results are not necessarily indicative of the results to be expected in the future.

 

     Year Ended December 31,  
     2011     2010     2009      2008     2007  
     (in thousands, except share and per share data)  

Statement of Operations Data:

           

Revenue(1)

   $ 79,297      $ 83,193      $ 58,852       $ 42,954      $ 36,237   

Cost of revenue(2)

     28,687        29,438        21,269         19,249        16,028   
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Gross profit

     50,610        53,755        37,583         23,705        20,209   
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Operating expense:

           

Research and development(2)

     28,565        23,781        17,847         17,501        17,332   

Sales and marketing(2)

     12,700        8,823        7,704         6,339        5,157   

General and administrative(2)

     9,141        9,212        3,947         3,169        2,966   
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Total operating expense

     50,406        41,816        29,498         27,009        25,455   
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Income (loss) from operations

     204        11,939        8,085         (3,304     (5,246

Interest and other income (expense)

     509        (50     73         (124     (95
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Income (loss) before income taxes

     713        11,889        8,158         (3,428     (5,341

Provision (benefit) for income taxes(3)

     (1,218     (14,242     829         —          —     
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Net income (loss)

   $ 1,931      $ 26,131      $ 7,329       $ (3,428   $ (5,341
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Net income (loss) allocable to common and participating common securities

   $ 1,931      $ 5,326      $ 136       $ (3,428   $ (5,341
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Earnings per share:

           

Basic

   $ 0.07      $ 1.03      $ 0.08       $ (2.66   $ (6.57
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Diluted

   $ 0.07      $ 0.61      $ 0.05       $ (2.66   $ (6.57
  

 

 

   

 

 

   

 

 

    

 

 

   

 

 

 

Weighted-average shares used in computing earnings per share:

           

Basic

     26,799,237        5,086,169        1,668,876         1,289,431        813,290   

Diluted

     29,367,423        8,546,537        2,785,277         1,289,431        813,290   

 

(1) Samsung, together with associated entities, held over 13% of our outstanding shares of common stock before our initial public offering. After our initial public offering in November 2010, Samsung, together with associated entities, holds less than 10% of our outstanding shares of common stock. As a result of decline in ownership below 10% of our common stock, we no longer consider Samsung a related party. Revenues from Samsung were $27,940, $21,235, $10,227 and $4,556 for the years ended December 31, 2010, 2009, 2008 and 2007, respectively.

Footnotes continued on the following page.

 

37


Table of Contents
     As of December 31,  
     2011      2010      2009     2008     2007  
     (in thousands)  

Balance Sheet Data:

            

Cash and cash equivalents

   $ 29,696       $ 110,172       $ 19,061      $ 9,052      $ 3,268   

Investments in marketable securities

     89,283         —           —          —          —     

Working capital

     129,395         116,887         20,055        10,721        3,010   

Total assets

     172,628         158,957         34,472        20,373        16,190   

Total liabilities

     14,224         16,271         11,588        6,558        10,522   

Convertible preferred stock

     —           —           77,616        77,616        67,680   

Total stockholders’ equity (deficit)

   $ 158,404       $ 142,686       $ (54,732   $ (63,801   $ (62,012

 

Footnotes continued from the prior page.

 

(2) Stock-based compensation expense is included in our results of operations as follows:

 

     As of December 31,  
     2011      2010      2009      2008      2007  
     (in thousands)  

Operating expenses:

              

Cost of revenue

   $ 315       $ 107       $ 31       $ 119       $ 19   

Research and development

     3,214         1,381         475         358         168   

Sales and marketing

     2,054         526         238         101         66   

General and administrative

     1,609         691         421         417         574   

 

(3) The provision (benefit) for income taxes for the years ended December 31, 2010 and 2009 included the releases and reversals of valuation allowances against deferred tax assets provided in prior periods. Please see note 9 to the notes to our consolidated financial statements.

 

38


Table of Contents
ITEM 7. MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATIONS

This report contains forward-looking statements within the meaning of the Private Securities Litigation Reform Act of 1995. When used in this report, the terms “may,” “might,” “will,” “objective,” “intend,” “should,” “could,” “can,” “would,” “expect,” “believe,” “estimate,” “predict,” “potential,” “plan,” or the negative of these terms, and similar expressions intended to identify forward-looking statements. These statements are statements that relate to future periods and include statements regarding our anticipated trends and challenges in our business and the markets in which we operate, including the market for 40G and 100G high-speed analog semiconductor solutions, our plans for future products, such as our isolation memory buffer or iMB™, clock and data recovery, or CDR, and serializer/deserializer, or SERDES, products, and enhancements of existing products, our expectations regarding our expenses and revenue, sources of revenue, our tax benefits, the benefits of our products and services, timing of the development of our products, our anticipated cash needs and our estimates regarding our capital requirements and our needs for additional financing, our anticipated growth and growth strategies, our ability to retain and attract customers, particularly in light of our dependence on a limited number of customers for a substantial portion of our revenue, our expectations regarding competition, interest rate sensitivity, adequacy of our disclosure controls, our legal proceedings and warranty claims. These forward-looking statements involved known and unknown risks, uncertainties and other factors that may cause our actual results, performance or achievements to be materially different from any future results, performance or achievements expressed or implied by these or any other forward-looking statements. These risks and uncertainties include, but are not limited to, those risks discussed below, as well as factors affecting our results of operations, our ability to manage our growth, our ability to sustain or increase profitability, demand for our solutions, the effect of declines in average selling prices for our products, our ability to compete, our ability to rapidly develop new technology and introduce new products, our ability to safeguard our intellectual property, trends in the semiconductor industry and fluctuations in general economic conditions, and the risks set forth throughout this Report, including the risks set forth under Part I, “ Item 1A, Risk Factors”. Readers are cautioned not to place undue reliance on these forward-looking statements, which are based on current expectations and reflect management’s opinions only as of the date hereof. These forward-looking statements speak only as of the date of this Report. We expressly disclaim any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained herein to reflect any change in our expectations with regard thereto or any changes in events, conditions or circumstances on which any such statement is based.

The following discussion and analysis should be read in conjunction with the consolidated financial statements and related notes that are included elsewhere in this Annual Report on Form 10-K.

Overview

We are a fabless provider of high-speed analog semiconductor solutions for the communications and computing markets. Our analog semiconductor solutions provide high signal integrity at leading-edge data speeds while reducing system power consumption. Our semiconductor solutions are designed to address bandwidth bottlenecks in networks, maximize throughput and minimize latency in computing environments and enable the rollout of next generation communications and computing infrastructures. Our solutions provide a vital high-speed interface between analog signals and digital information in high-performance systems such as telecommunications transport systems, enterprise networking equipment, datacenter and enterprise servers, storage platforms, test and measurement equipment and military systems. We provide 40G and 100G high-speed analog semiconductor solutions for the communications market and high-speed memory interface solutions for the computing market. We have a broad product portfolio with 17 product lines and over 170 products as of December 31, 2011. We have ongoing, informal collaborative discussions with industry and technology leaders such as AMD, Alcatel-Lucent, Huawei and Intel to design architectures and products that solve bandwidth bottlenecks in existing and next generation communications and computing systems. Although we do not have any formal agreements with these entities, we engage in informal discussions with these entities with respect to anticipated technological challenges, next generation customer requirements and industry conventions and standards. We help define industry conventions and standards within the markets we target by collaborating with technology leaders, OEMs, systems manufacturers and standards bodies.

 

39


Table of Contents

The history of our product development and sales and marketing efforts is as follows:

 

   

From 2000 to 2002, we were primarily engaged in the development of our core high-speed analog products and proprietary system architecture models to address bottlenecks in emerging network architectures. Specifically, during this period, we developed and shipped our 50 GHz MUX and DEMUX products. During this period, we also began development work on our initial 40G products.

 

   

In 2003, we introduced and shipped 13G, 25G and 50G logic products, 20G MUX and 40G transimpedance amplifiers and modulator drivers for the communications, test and measurement and military markets. During this period, we also began the development of our first generation high-speed PLLs and register solution used primarily in conjunction with double data rate 2, or DDR2, modules for the computing market.

 

   

In 2005, we introduced and shipped our high-speed PLLs and register solution used primarily in conjunction with DDR2 modules for the computing market.

 

   

In 2006, we began development of our second generation single chip high-speed PLLs and register solution to be used primarily in conjunction with double data rate 3, or DDR3, modules for the computing market and were the first to introduce this product to the market. In addition, we introduced and shipped track-and-hold amplifiers for the communications market.

 

   

In 2007, we began volume shipments of our high-speed PLLs and register solution used primarily in conjunction with DDR2 modules, and continued development of our single chip high-speed PLLs and register solution, used primarily in conjunction with DDR3 modules.

 

   

In 2008, we began volume shipments of our 40G drivers for the communications market and commenced shipments of our high-speed PLLs and register solution used primarily in conjunction with DDR3 modules for the computing market.

 

   

In 2009, due to the launch of Intel’s Nehalem-based platform servers, we began volume shipments of our single chip high-speed PLLs and register solution to be used primarily in conjunction with DDR3 modules. We also shipped engineering samples of the first generation of our isolation memory buffer, or iMB™, for the computing market. We also began development of our second generation iMB™ product, the architecture for which has been adopted by the Joint Electronic Device Engineering Council, or JEDEC, and development of our low power CMOS SERDES product for next generation 100G Ethernet in enterprise networks.

 

   

In 2010, we began to ship in production volume a “low voltage” version of our integrated PLL and register buffer. We also shipped engineering samples of the second generation iMB™ product.

 

   

In 2011, we began to ship in production volume a new “ultra-low voltage” version of our integrated PLL and register buffer and the second generation of iMB™. We also shipped engineering samples of our CDR and SERDES products.

Our products are designed into systems sold by OEMs, including Agilent, Alcatel-Lucent, Cisco, Danaher, Dell, EMC, HP, Huawei, IBM and Oracle. We believe we are one of a limited number of suppliers to these OEMs, and in some cases we may be the sole supplier for certain applications. We sell both directly to these OEMs and to module manufacturers, original design manufacturers, or ODMs, and subsystems providers that, in turn, sell to these OEMs. During the year ended December 31, 2011, we sold our products to more than 160 customers. A significant portion of our revenue has been generated by a limited number of customers. Sales directly to Samsung accounted for 27% and 34% of our total revenue and sales directly and through distributors to Micron accounted for 11% and 11% of our total revenue for the years ended December 31, 2011 and 2010, respectively. In addition, sales directly to Hynix accounted for 14% of our total revenue for the year ended December 31, 2011. Substantially all of our sales to date, including our sales to Samsung, Micron and Hynix, are made on a purchase order basis. Since the beginning of 2006, we have shipped more than 100 million high-speed analog semiconductors. Our total revenue decreased to $79.3 million for the year ended December 31, 2011 from $83.2 million for the year ended December 31, 2010. As of December 31, 2011, our accumulated deficit was $32.7 million.

 

40


Table of Contents

Sales to customers in Asia accounted for 69%, 80%, and 77% of our total revenue in 2011, 2010 and 2009, respectively. Because many of our customers or their OEM manufacturers are located in Asia, we anticipate that a majority of our future revenue will continue to come from sales to that region. Although a large percentage of our sales are made to customers in Asia, we believe that a significant number of the systems designed by these customers are then sold to end users outside Asia.

In April 2010, we received approval from the government of Singapore to set up an international headquarters from which to conduct our international operations. Because of its geographic alignment with suppliers and customers, we established our operations in Singapore to become a new international headquarters office for receiving and fulfilling orders for product shipped to locations outside the United States. Singapore has a strong university system and an established group of technology-based companies from which to recruit new engineers. We intend to build a team of engineering capability in Singapore both for development as well as testing associated with manufacturing. International operations in Singapore commenced on May 1, 2010 and during 2010, we transitioned our international operations from the United States to our Singapore subsidiary.

Demand for new features changes rapidly. It is difficult for us to forecast the demand for our products, in part because of the complex supply chain between us and the end-user markets that incorporate our products. Due to our lengthy product development cycle, it is critical for us to anticipate changes in demand for our various product features and the applications they serve to allow sufficient time for product development and design. Our failure to accurately forecast demand can lead to product shortages that can impede production by our customers and harm our customer relationships. Conversely, our failure to forecast declining demand or shifts in product mix can result in excess or obsolete inventory.

Although revenue generated by each design win and the timing of the recognition of that revenue can vary significantly, we consider ongoing design wins to be a key factor in our future success. We consider a design win to occur when an OEM or contract manufacturer notifies us that it has selected our products to be incorporated into a product or system under development. The design win process is typically lengthy, and as a result, our sales cycles will vary based on the market served, whether the design win is with an existing or new customer and whether our product is under consideration for inclusion in a first or subsequent generation product. In addition, our customers’ products that incorporate our semiconductors can be complex and can require a substantial amount of time to define, design and produce in volume. As a result, we can incur significant design and development expenditures in circumstances where we do not ultimately recognize, or experience delays in recognizing revenue. Our customers generally order our products on a purchase order basis. We do not have any long-term purchase commitments (in excess of one year) from any of our customers. Once our product is incorporated into a customer’s design, however, we believe that our product is likely to continue to be purchased for that design throughout that product’s life cycle because of the time and expense associated with redesigning the product or substituting an alternative semiconductor. Our design cycle from initial engagement to volume shipment is typically two to three years. Product life cycles in the markets we serve typically range from two to 10 years or more and vary by application.

Summary of Consolidated Financial Results

As discussed in more detail below, for the year ended December 31, 2011 compared to the year ended December 31, 2010, we delivered the following financial performance:

 

   

Total revenues decreased by $3.9 million, or 5%, to $79.3 million.

 

   

Gross profit as a percentage of revenue decreased slightly to 64% from 65%.

 

   

Total operating expenses increased by $8.6 million, or 21%, to $50.4 million.

 

   

Income from operations decreased by $11.7 million, or 98%, to $0.2 million.

 

   

Diluted earnings per share decreased by $0.54, or 89%, to $0.07.

 

41


Table of Contents
   

In 2011, we decided to discontinue the sale of legacy products supported by our Taiwan subsidiary and transitioned the Taiwan subsidiary to be a design and sales support center. The restructuring expense associated with the change in the Taiwan structure was $1.8 million, of which $1.4 million pertains to write off of certain intangibles.

The decrease in our revenue for the year ended December 31, 2011 was a result of a decrease in consumption of our high speed memory interface products as customers depleted their own inventories rather than purchasing new parts and a temporary slowdown as customers transition to the new technology platform.

Our income from operations decreased due to lower gross profit and increased operating expenses. Total operating expenses increased due primarily to an increase in headcount and stock-based compensation, as well as the restructuring charges related to the Taiwan subsidiary. Our expenses primarily consist of personnel costs, which include compensation, benefits, payroll related taxes and stock-based compensation. The acquisition of Winyatek Technology Inc. on June 30, 2010 increased our headcount by 29. In addition, in 2011 we also hired 33 new employees, primarily in the engineering department. We expect expenses to continue to increase in absolute dollars as we continue to invest resources to develop more products, to support the growth of our business and the cost associated with being a public company including, compliance with Sarbanes-Oxley Act of 2002. Our diluted earnings per share decreased primarily due to reduction in revenues combined with increases in operating expenses, reversal of deferred tax assets valuation allowance of $24.0 million during the year ended December 31, 2010, new issuance of common stock as a result of initial public offering in November 2010 and due to preferred stock excluded from the diluted earnings per share calculation as they were antidilutive. Shares of our preferred stock were converted into common stock in November 2010 upon completion of our initial public offering.

Critical Accounting Policies and Significant Management Estimates

Our consolidated financial statements are prepared in accordance with U.S. Generally Accepted Accounting Principles, or GAAP. In connection with the preparation of our consolidated financial statements, we are required to make assumptions and estimates about future events, and apply judgments that affect the reported amounts of assets, liabilities, revenue, expenses and the related disclosures. We base our assumptions, estimates and judgments on historical experience, current trends and other factors that management believes to be relevant at the time our consolidated financial statements are prepared. On a regular basis, we review the accounting policies, assumptions, estimates and judgments to ensure that our consolidated financial statements are presented fairly and in accordance with GAAP. However, because future events and their effects cannot be determined with certainty, actual results could differ from our assumptions and estimates, and such differences could be material.

Our significant accounting policies are discussed in note 1 of the notes to our consolidated financial statements. We believe that the following accounting estimates are the most critical to aid in fully understanding and evaluating our reported financial results, and they require our most difficult, subjective or complex judgments, resulting from the need to make estimates about the effect of matters that are inherently uncertain. We have reviewed these critical accounting estimates and related disclosures with our audit committee.

Revenue Recognition

Our products are fully functional at the time of shipment and do not require production, modification or customization. We recognize revenue from product sales when persuasive evidence of an arrangement exists, delivery has occurred, the fee is fixed or determinable and collection is reasonably assured. Our fee is considered fixed or determinable at the execution of an agreement, based on specific products and quantities to be delivered at specified prices, which is evidenced by a customer purchase order or other persuasive evidence of an arrangement. Our agreements with non-distributor customers do not include rights of return or acceptance provisions. Product revenue is recognized upon shipment of product to end customers.

 

42


Table of Contents

Approximately 17% of our sales were made through third-party distributors in 2011. Sales to distributors are included in deferred revenue and we include the related costs in inventory until sales and delivery to the end customers occurs. Two distributor arrangements, which together accounted for 9% of our total revenue in 2011, allow for limited price protection and rights of stock rotation on product unsold by the distributors. The price protection rights allow distributors the right to a credit in the event of declines in the price of our product that they hold prior to the sale to a specific end customer. In the event that we reduce the selling price of products held by distributors, deferred revenue related to distributors with price protection rights is reduced upon notification to the customer of the price change. Stock rotation in the two distributor arrangements is limited to returns for exchange only for a small percentage of product (5%-10%) purchased over a limited period of time (during the immediately prior three to nine months). Other than these two arrangements, no other customer arrangements include any rights of return or acceptance provisions. There were no material product returns or price protection credits in 2011, 2010 and 2009. Revenue recognition on product sales through distributors is highly dependent on receiving pertinent and accurate data from our distributors in a timely fashion. Distributors provide us periodic data prior to the release of our consolidated financial statements regarding the product, price, quantity and end customer when products are resold, as well as the quantities of our products they still have in stock.

We have not experienced any significant sales returns from end customers due to our stringent quality control standards. We monitor collectability of accounts receivable primarily through review of the accounts receivable aging. Our policy is to record an allowance for doubtful accounts based on specific collection issues we have identified, aging of underlying receivables and historical experience of uncollectible balances. As of December 31, 2011 and 2010, our allowance for doubtful accounts was $68,000.

We have not made any material changes in the accounting methodology we use to record the allowance for doubtful accounts during the past three years. If actual results are not consistent with the assumptions and estimates used, for example, if the financial condition of the customer deteriorated, we may be required to record additional expense that could materially negatively impact our operating results. To date, however, substantially all of our receivables have been collected within the credit term of 30 to 45 days.

Inventory Valuation

We value our inventory, which includes materials, labor and overhead, at the lower of cost or market. Cost is computed using standard cost, which approximates actual cost, on a first-in, first-out basis. We periodically write-down our inventory to the lower of cost or market based on our estimates that consider historical usage and future demand. These factors are impacted by market and economic conditions, technology changes, new product introductions and changes in strategic direction. The calculation of our inventory valuation requires management to make assumptions and to apply judgment regarding forecasted customer demand and technological obsolescence that may turn out to be inaccurate. Inventory valuation reserves were $1,509,000, $1,372,000 and $916,000, as of December 31, 2011, 2010 and 2009, respectively. Inventory valuation reserves, once established, are not reversed until the related inventory has been sold or scrapped.

We have not made any material changes in the accounting methodology we use to record inventory reserves during the past three years. We do not believe there is a reasonable likelihood that there will be a material change in the future estimates or assumptions that we use to calculate our inventory reserve. However, if estimates regarding customer demand are inaccurate or changes in technology affect demand for certain products in an unforeseen manner, we may be exposed to losses or gains that could be material.

Product Warranty

Our products are under warranty against defects in material and workmanship generally for a period of one or two years. We accrue for estimated warranty cost at the time of sale based on anticipated warranty claims and actual historical warranty claims experience including knowledge of specific product failures that are outside of

 

43


Table of Contents

our typical experience. The warranty obligation is determined based on product failure rates, cost of replacement and failure analysis cost. We monitor product returns for warranty-related matters and monitor an accrual for the related warranty expense based on historical experience. Our warranty obligation requires management to make assumptions regarding failure rates and failure analysis costs. If actual warranty costs differ significantly from these estimates, adjustments may be required in the future, which would adversely affect our gross margins and operating results. The warranty liability as of December 31, 2011, 2010 and 2009, were $1,000,000 and $602,000 and $450,000, respectively.

In September 2010, we were informed of a claim related to repair and replacement costs in connection with shipments of over 4,000 integrated circuits made by us during the summer and fall of 2009. Of these shipments, approximately 4% were later confirmed or suspected to have random manufacturing process anomalies in the wafer die in the product. These anomalies made the circuitry of a small number of random die per foundry wafer susceptible to failure under certain customer specific system operating conditions. At the time of shipment in 2009 and early 2010, we established an initial warranty reserve and added to that accrual as the problem was identified and reliable information became available. The foundry who produced the wafers has informed us that the random anomalies are normal in a Gallium Arsenide, or GaAs, manufacturing process. We are currently investigating whether these anomalies were normal, or whether they could have been the result of a foundry manufacturing process that was not sufficiently robust to reliably produce a part that could deliver the specified performance.

In March 2010, we developed additional tests to screen out the wafer die that might be susceptible to this type of failure and resumed shipments to the customer with no subsequent additional reported incidents. Based on our standard warranty provisions, we have provided replacement parts to the customer for the known and suspected failures that had occurred.

In addition and without informing us, in the fall of 2009 the customer instituted its own larger scale replacement program that covered the replacement of entire subassemblies in which our product was only one component. In September 2010, the customer made an initial claim for approximately $18 million against us for the costs incurred relative to that program. In June 2011, the customer sent us an e-mail and reduced their initial claim down to $ 6.6 million. We believe the amount of the claim is without merit as our warranty liability is contractually limited to the repair or replacement of our affected products, which to the extent the customer has requested replacement, has already been completed. A formal claim has yet to be made and discussions with the customer are ongoing. At this time, we believe our current warranty reserves are adequate to address the matter and that our obligations under our standard warranty provisions have been fulfilled. However, claims of this nature are subject to various risks and uncertainties and there can be no assurance that this matter will be resolved without further significant costs to us, including the potential for arbitration or litigation and adverse customer relations. If and when the amount of any additional loss, if any, becomes both probable and determinable, we may be required to record an incremental reserve.

Goodwill and Purchased Intangible Assets

Goodwill represents the excess of the cost of an acquired entity over the fair value of the acquired net assets. Events or circumstances which could trigger an impairment review include, but are not limited to a significant adverse change in legal factors or in the business climate, an adverse action or assessment by a regulator, unanticipated competition, a loss of key personnel, significant changes in the manner of use of the acquired assets or the strategy for our overall business, significant negative industry or economic trends or significant underperformance relative to expected historical or projected future results of operations.

Goodwill is tested for impairment on an annual basis during the fourth fiscal quarter or more frequently if we believe indicators of impairment exist. The performance of the test involves a two-step process. The first step requires comparing the fair value of the reporting unit to its net book value, including goodwill. Since we only have one reporting unit, the fair value of the reporting unit is determined by taking our market capitalization as

 

44


Table of Contents

determined through quoted market prices and adjusted for control premiums and other relevant factors. A potential impairment exists if the fair value of the reporting unit is lower than its net book value. The second step of the process is only performed if a potential impairment exists, and it involves determining the difference between the fair value of the reporting unit’s net assets other than goodwill and the fair value of the reporting unit. If the difference is less than the net book value of goodwill, impairment exists and is recorded. In the event that we determine that the value of goodwill has become impaired, we will record an accounting charge for the amount of impairment during the fiscal quarter in which the determination is made. We have not been required to perform this second step of the process because the fair value of the reporting unit has significantly exceeded its book value at every measurement date.

Stock-Based Compensation

We account for stock-based compensation in accordance with authoritative guidance which requires the measurement and recognition of compensation expense for all share-based payment awards made to employees and directors based on the grant date fair values of the awards. The fair value is estimated using the Black-Scholes option pricing model. The value of the award that is ultimately expected to vest is recognized as expense over the requisite service periods in our consolidated statements of operations. We elected to treat share-based payment awards with graded vesting schedules and time-based service conditions as a single award and recognize stock-based compensation expense on a straight-line basis (net of estimated forfeitures) over the requisite service period. Stock-based compensation expenses are classified in the statement of operations based on the department to which the related employee reports.

We account for stock options issued to non-employees in accordance with the guidance for equity-based payments to non-employees. Stock option awards to non-employees are accounted for at fair value using the Black-Scholes option pricing model. Our management believes that the fair value of stock options is more reliably measured than the fair value of the services received. The fair value of the unvested portion of the options granted to non-employees is re-measured each period. The resulting increase in value, if any, is recognized as expense during the period the related services are rendered.

The Black-Scholes option pricing model requires management to make assumptions and to apply judgment in determining the fair value of our awards. The most significant assumptions and judgments include estimating the fair value of underlying stock, expected volatility and expected term. In addition, the recognition of stock-based compensation expense is impacted by estimated forfeiture rates.

We estimated the expected volatility from the historical volatilities of several unrelated public companies within the semiconductor industry because our common stock has limited trading history. When selecting the public companies used in the volatility calculation, we selected companies in the semiconductor industry with comparable characteristics to us, including stage of development, lines of business, market capitalization, revenue and financial leverage. The weighted average expected life of options was calculated using the simplified method. This decision was based on the lack of relevant historical data due to our limited experience and the lack of active market for our common stock. The risk-free interest rate is based on the U.S. Treasury yields in effect at the time of grant for periods corresponding to the expected term of the options. The expected dividend rate is zero based on the fact that we have not historically paid dividends and have no intention to pay cash dividends in the foreseeable future. The forfeiture rate is established based on the historical average period of time that options were outstanding and adjusted for expected changes in future exercise patterns.

We do not believe there is a reasonable likelihood that there will be material changes in the estimates and assumptions we use to determine stock-based compensation expense. In the future, if we determine that other option valuation models are more reasonable, the stock-based compensation expense that we record in the future may differ significantly from what we have recorded using the Black-Scholes option pricing model.

 

45


Table of Contents

Income Taxes

Deferred tax assets and liabilities are determined based on differences between financial reporting and tax bases of assets and liabilities, and are measured using the enacted tax rates and laws that will be in effect when and where the differences are expected to reverse. We record a valuation allowance to reduce deferred tax assets to the amount that we believe is more likely than not to be realized. In assessing the need for a valuation allowance, we considered historical levels of income, projections of future income, expectations and risk associated with estimates of future taxable income and ongoing prudent and practical tax planning strategies. To the extent that we believe it is more likely than not that some portion of our deferred tax assets will not be realized, we would increase the valuation allowance against deferred tax assets. Although, we believe that the judgment we used is reasonable, actual results can differ due to a change in market conditions, changes in tax laws and other factors.

From inception through 2008, we incurred annual losses, and accordingly, we determined that a valuation allowance should be recorded against all of our deferred tax assets. We considered future taxable income and prudent and feasible tax planning strategies in determining the need for a valuation allowance and evaluated the need for a valuation allowance on a regular basis. The determination of recording or releasing a tax valuation allowance is made, in part, pursuant to an assessment performed by management regarding the likelihood that we will generate sufficient future taxable income against which the benefits of our deferred tax assets may or may not be realized. This assessment requires management to exercise significant judgment and make estimates with respect to our ability to generate revenue, gross profits, operating income and taxable income in future periods. Among other factors, management must make assumptions regarding current and projected overall business and semiconductor industry conditions, operating efficiencies, our ability to timely develop, introduce and consistently manufacture new products to meet our customers’ needs and specifications, our ability to adapt to technological changes and the competitive environment, which may impact our ability to generate taxable income and, in turn, realize the value of our deferred tax assets. Significant cumulative operating losses in 2008 and prior years, uncertainty with respect to the acceptance of our products by end customers and significant economic uncertainties in the market made our ability to project future taxable income highly uncertain and volatile at December 31, 2009. Although 2009 was our first profitable year, only the last three quarters of the year were profitable and the vast majority of our pre-tax income was generated in the last two quarters of the year. Based upon management’s assessment of all available evidence, including a relatively short period of recent profitability coupled with significant uncertainties associated with our 2010 business outlook, we concluded, as of December 31, 2009, that it was not more likely than not that our net deferred tax assets would be realized. See note 9 of the notes to our consolidated financial statements.

In March 2010, we received our first substantial quantity of production orders for a low voltage product, product number INSSTE32882LV-GS02, or the GS02 product, which was a new low voltage version of our integrated PLL and register buffer. This GS02 product has been launched and in full commercial production and is shipping in commercial volume. The arrival of these production orders from one of our largest customers reduced concerns and increased our confidence in the strength of our business outlook for the balance of 2010. In addition, certain other new product introductions began to gain traction with customers, providing additional confidence in our longer term outlook. We also achieved further clarity around certain contingencies related to ongoing litigation and certain other product acceptance concerns that existed at December 31, 2009. Furthermore, during the first quarter of 2010, we unexpectedly received additional orders for an older product that allowed us to exceed the overall plan for the quarter and continue our recent trend of profitability into the first quarter of 2010. At its April 30, 2010 meeting, based on a review of the positive developments that materialized in the first quarter of 2010, our board of directors decided to authorize management to retain investment bankers and proceed with plans to pursue a potential initial public offering. Based on these positive developments and an additional quarter of profitable operation, we reassessed the need for a valuation allowance at March 31, 2010 and concluded that a change in circumstances had occurred. Management determined that, based on our prospects and business outlook, it was then reasonable to conclude that it is more likely than not that our deferred tax assets will be realized. Accordingly, we released the full valuation allowance recorded against our deferred

 

46


Table of Contents

tax assets based on the weight of positive evidence that existed at March 31, 2010. Significant judgment is required to determine the timing and extent of a valuation allowance release and our ability to utilize deferred tax assets will continue to be dependent on our ability to generate sufficient taxable income in future periods.

Based on our current trend of operating results and forecasts, we believe that it is more likely than not that we will recognize the benefit of our deferred tax assets and no valuation allowance is required as of December 31, 2011 and 2010, except for the deferred tax assets of our Taiwan subsidiary for which a full valuation allowance of $433 was provided at December 31, 2011.

In accordance with FASBs guidance on Accounting for Uncertainty in Income Taxes, we perform a comprehensive review of uncertain tax positions regularly. The guidance prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken, or expected to be taken, in a tax return. We determine the tax liability for uncertain tax positions based on a two-step process. The first step is to determine whether it is more likely than not based on technical merits that each income tax position would be sustained upon examination. The second step is to measure the tax benefit as the largest amount that has a greater than 50% likelihood of being realized upon ultimate settlement with a tax authority that has full knowledge of all relevant information. The assessment of each tax position requires significant judgment and estimates. We believe our tax return positions are fully supported, but tax authorities could challenge certain positions, which may not be fully sustained. All tax positions are periodically analyzed and adjusted as a result of events, such as the resolution of tax audits, issuance of new regulations or new case law, negotiations with tax authorities, and expiration of statutes of limitations.

Results of Operations and Key Operating Metrics

The following describes the line items in the statements of operations, which we consider to be our key operating metrics.

Revenue. We generate revenue from sales of our semiconductor products to end customers. A portion of our products is sold indirectly to customers through distributors.

We design and develop high-speed analog semiconductor solutions for the communications and computing markets. Our revenue is driven by various trends in these markets. These trends include the deployment and broader market adoption of next generation 40G and 100G technologies in communications and enterprise networks, the timing of next generation network and enterprise server upgrades in different geographic locations worldwide, the introduction and broader market adoption of next generation server platforms such as Intel’s Nehalem-based platform, and the deployment of high-speed memory interfaces in server and computing platforms.

Our revenue is also impacted by changes in the number and average selling prices of our semiconductor products. Our products are typically characterized by a life cycle that begins with higher average selling prices and lower volumes, followed by broader market adoption, higher volumes, and average selling prices that are lower than initial levels.

We operate in industries characterized by rapidly changing technologies and industry standards as well as technological obsolescence. Our revenue growth is dependent on our ability to continually develop and introduce new products to meet the changing technology and performance requirements of our customers, diversify our revenue base and generate new revenue to replace, or build upon, the success of previously introduced products which may be rapidly maturing. As a result, our revenue is impacted to a more significant extent by product life cycles for a variety of products and to a much lesser extent, if any, by any single product. In 2009, we successfully introduced and began to ship a new product in production which integrated a new PLL, along with a new register buffer. Sales of this newly introduced part comprised 18% and 43% of our total revenue in 2010 and 2009, respectively. In 2010, this product matured. As a result, sales of this product in 2010 declined in volume. In

 

47


Table of Contents

2010, we also began to ship in production volume a new “low voltage” version of our integrated PLL and register buffer, which is shipping in the form of product number INSSTE32882LV-GS02, or the GS02 product. Sales of the GS02 product comprised 38% and 32% of our total revenue in 2011 and 2010, respectively. In 2011, we began to ship in production volume a new “ultra-low voltage” version of our integrated PLL and register buffer, which is shipping in the form of product number INSSTE32882UV-GS02, or the GS02UV product. Sales of the GS02UV product comprised 13% of our total revenue in 2011. In 2012, we expect that revenue from sales of GS02 and GS02UV will continue to be significant.

The following table is based on the geographic location to which our product is initially shipped. In most cases this will differ from the ultimate location of the end user of a product containing our technology. For sales to our distributors, their geographic location may be different from the geographic locations of the ultimate end customer. Sales by geography for the periods indicated were:

 

     Year Ended December 31,  
     2011      2010      2009  
     (in thousands)  

Korea

   $ 14,421       $ 14,319       $ 18,307   

United States

     16,791         13,528         10,727   

China

     23,378         29,238         9,924   

Other

     24,707         26,108         19,894   
  

 

 

    

 

 

    

 

 

 
   $ 79,297       $ 83,193       $ 58,852   
  

 

 

    

 

 

    

 

 

 

Cost of revenue. Cost of revenue includes cost of materials such as wafers processed by third-party foundries, costs associated with packaging and assembly, test and shipping, cost of personnel, including stock-based compensation, as well as equipment associated with manufacturing support, logistics and quality assurance, warranty costs, write down of inventories, amortization of production mask costs, overhead and other indirect costs, such as allocated occupancy and information technology, or IT, costs.

As some semiconductor products mature and unit volumes increase, their average selling prices may decline. These declines are often paired with improvements in manufacturing yields and lower wafer, assembly and test costs, which offset some of the margin reduction that results from lower prices. However, our gross profit, period over period, may fluctuate as a result of changes in average selling prices due to new product introductions or existing product transitions into larger scale commercial volumes, manufacturing costs as well as our product mix.

Research and development. Research and development expense includes personnel-related expenses, including salaries, stock-based compensation and employee benefits. It also includes pre-production engineering mask costs, software license expenses, prototype wafer, packaging and test costs, design and development costs, testing and evaluation costs, depreciation expense and other indirect costs. All research and development costs are expensed as incurred. We expect research and development expense to increase in absolute dollars as we continue to invest resources to develop more products and enhance our existing product portfolio.

Sales and marketing. Sales and marketing expense consists primarily of salaries, stock-based compensation, employee benefits, travel, promotions, trade shows, marketing and customer support, commission payments to employees, depreciation expense and other indirect costs. We expect sales and marketing expense to increase in absolute dollars to support the growth of our business and promote our products to current and potential customers.

General and administrative. General and administrative expense consists primarily of salaries, stock-based compensation, employee benefits and expenses for executive management, legal, finance and human resources. In addition, general and administrative expenses include fees for professional services and other indirect costs.

 

48


Table of Contents

We expect general and administrative expense to increase in absolute dollars due to the general growth of our business and the costs associated with becoming a public company for, among other things, SEC reporting and compliance, including compliance with the Sarbanes-Oxley Act of 2002, director fees, insurance, transfer agent fees and similar expenses.

Provision (benefit) for income taxes. As of December 31, 2009, we had recorded a valuation allowance for the full amount of our deferred tax asset, as the realization of the full amount of our deferred tax asset was uncertain. Therefore, no deferred tax expense or benefit was recognized in the consolidated financial statements. In 2009, a provision for current income tax was recorded primarily due to our inability to use net operating loss carryforwards for state tax purposes in California and alternative minimum tax for federal tax purposes. For the year ended December 31, 2010, we recorded a net tax benefit of $14.2 million, which reflects an effective tax rate benefit of 120%. The effective tax rate benefit of 120% differs from the statutory rate of 35% primarily due to a release of our deferred tax valuation allowance and, to a lesser extent, foreign income taxes provided at lower rates, geographic mix in profitability and recognition of federal research and development credits. For the year ended December 31, 2011, we recorded a net tax benefit of $1.2 million, which reflects an effective tax rate benefit of 171%. The effective tax rate benefit of 171% differs from the statutory rate of 35% primarily due to prior year provision true-up for a worldwide combined filing basis taken on the California tax return and, foreign income taxes provided at lower rates, geographic mix in profitability and recognition of federal research and development credits. In 2012, we expect the effective tax rate to be lower than 35% due to foreign operations subject to lower tax rates.

The following table sets forth a summary of our statement of operations for the periods indicated:

 

     Year Ended December 31,  
     2011     2010     2009  
     (in thousands)  

Total revenue

   $ 79,297      $ 83,193      $ 58,852   

Cost of revenue

     28,687        29,438        21,269   
  

 

 

   

 

 

   

 

 

 

Gross profit

     50,610        53,755        37,583   
  

 

 

   

 

 

   

 

 

 

Operating expense:

      

Research and development

     28,565        23,781        17,847   

Sales and marketing

     12,700        8,823        7,704   

General and administrative

     9,141        9,212        3,947   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     50,406        41,816        29,498   
  

 

 

   

 

 

   

 

 

 

Income from operations

     204        11,939        8,085   

Interest and other income (expense)

     509        (50     73   
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     713        11,889        8,158   

Provision (benefit) for income taxes

     (1,218     (14,242     829   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 1,931      $ 26,131      $ 7,329   
  

 

 

   

 

 

   

 

 

 

 

49


Table of Contents

The following table sets forth a summary of our statement of operations as a percentage of each line item to the revenue:

 

     Year Ended December 31,  
         2011             2010             2009      

Total revenue

     100     100     100

Cost of revenue

     36        35        36   
  

 

 

   

 

 

   

 

 

 

Gross profit

     64        65        64   
  

 

 

   

 

 

   

 

 

 

Operating expense:

      

Research and development

     36        29        30   

Sales and marketing

     16        11        13   

General and administrative

     12        11        7   
  

 

 

   

 

 

   

 

 

 

Total operating expenses

     64        51        50   
  

 

 

   

 

 

   

 

 

 

Income from operations

     —          14        14   

Interest and other income (expense)

     —          —          —     
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     —          14        14   

Provision (benefit) for income taxes

     (2     (17     2   
  

 

 

   

 

 

   

 

 

 

Net income

     2     31     12
  

 

 

   

 

 

   

 

 

 

Comparison of the Years Ended December 31, 2011, 2010 and 2009

Revenue

 

            Change  
     Year Ended December 31,      2011     2010  
     2011      2010      2009      Amount     %     Amount      %  
     (dollars in thousands)  

Total revenue

   $ 79,297       $ 83,193       $ 58,852       $ (3,896     (5 )%    $ 24,341         41

Total revenue for the year ended December 31, 2011 decreased by $3.9 million due to an 8% decrease in the number of units sold, partially offset by a year over year increase in average selling price of approximately 4%. The decrease in number of units sold was due to reduction in sales of our high speed memory interface products as customers depleted their own inventories rather than purchasing new parts and a temporary slowdown as customers transition to the new technology platform. The increase in average selling price was due to change in product mix.

Total revenue for the year ended December 31, 2010 increased by $24.3 million due to a 66% increase in the number of units sold, partially offset by a decrease in average selling price of 15%. The increase in unit volumes was a result of a wider acceptance of our products and technology in new server platforms, such as Intel’s Nehalem-based platform servers. Our average selling price decreased primarily as a result change in product mix.

Cost of Revenue and Gross Profit

 

                       Change  
     Year Ended December 31,     2011     2010  
     2011     2010     2009     Amount     %     Amount      %  
     (dollars in thousands)  

Cost of revenue

   $ 28,687      $ 29,438      $ 21,269      $ (751     (3 )%    $ 8,169         38

Gross profit

     50,610        53,755        37,583        (3,145     (6 )%      16,172         43

Gross profit as a percentage of revenue

     64     65     64     —          (1 )%      —           1

 

50


Table of Contents

Cost of revenue and gross profit for the year ended December 31, 2011 decreased by $0.8 million and $3.1 million, respectively, compared to the prior year primarily due to decrease in the number of units purchased by customers consistent with the overall decrease in revenue. Product costs as a percentage of revenue were relatively unchanged compared to the prior year.

Cost of revenue and gross profit for the year ended December 31, 2010 increased by $8.2 million and $16.2 million, respectively, compared to the prior year primarily due to an increase in the number of units purchased by customers consistent with the overall increase in revenue. Product costs as a percentage of revenue were relatively unchanged compared to the prior year.

Research and Development

 

                          Change  
     Year Ended December 31,      2011     2010  
     2011      2010      2009      Amount      %     Amount      %  
     (dollars in thousands)  

Research and development

   $ 28,565       $ 23,781       $ 17,847       $ 4,784         20   $ 5,934         33

Research and development expense for the year ended December 31, 2011 increased by $4.8 million due to the increase in research and development headcount, which resulted in a $3.4 million increase in personnel costs and stock-based compensation expense, a $0.3 million increase in pre-production engineering mask costs and a $0.5 million increase in engineering materials. The increase in personnel and development expense was primarily driven by our strategy to continue to expand our product offerings and enhance our existing products. Specifically, we accelerated the development of our products for next generation communications networks and high-speed memory interfaces. In addition, in 2011, our Taiwan subsidiary incurred restructuring charge of $0.3 million, which consisted mainly of a write-off of in process research and development intangible asset as a result of our restructuring of Taiwan subsidiary.

Research and development expense for the year ended December 31, 2010 increased by $5.9 million due to the increase in research and development headcount, establishment of a design center in United Kingdom and the acquisition of Winyatek Technology Inc., which together resulted in a $3.7 million increase in personnel costs and stock-based compensation expense, a $0.7 million increase in pre-production engineering mask costs and packaging development expense and engineering software expense of $0.2 million. The increase in personnel and development expense was primarily driven by our strategy to expand our product offerings and enhance our existing products. In addition, rent expense increased by $0.2 million due to new building leases for two offices in California.

Sales and Marketing

 

                          Change  
     Year Ended December 31,      2011     2010  
     2011      2010      2009      Amount      %     Amount      %  
     (dollars in thousands)  

Sales and marketing

   $ 12,700       $ 8,823       $ 7,704       $ 3,877         44   $ 1,119         15

Sales and marketing expense for the year ended December 31, 2011 increased primarily due to an increase in personnel costs, including stock-based compensation expense of $2.2 million, to support sales activities. In 2011, our Taiwan subsidiary incurred restructuring charge of $0.7 million, which consisted mainly of a write-off of customer relationship intangible asset. In addition, commission expense increased by $0.5 million as a result of an increase in sales made through third party representatives.

Sales and marketing expense for the year ended December 31, 2010 increased by $1.1 million primarily due to an increase in personnel costs, including stock-based compensation expense, to support the increased sales activities.

 

51


Table of Contents

General and Administrative

 

                          Change  
     Year Ended December 31,      2011     2010  
     2011      2010      2009      Amount     %     Amount      %  
     (dollars in thousands)  

General and administrative

   $ 9,141       $ 9,212       $ 3,947       $ (71     (1 )%    $ 5,265         133

General and administrative expenses for the year ended December 31, 2011 decreased slightly primarily due to reduction in legal fees by $1.3 million, primarily related to reduced expenditures for litigation matters described in note 16 of the notes to our financial statements. The decrease was offset by an increase in personnel costs, including stock-based compensation expense of $0.9 million. Our directors’ fees and business insurance both increased by $0.2 million due to the addition of two directors in 2010 and additional insurance for directors and officers as we transitioned to becoming a public company.

General and administrative expenses for the year ended December 31, 2010 increased by $5.3 million primarily due to third-party professional fees and personnel costs. Outside legal fees increased by $1.8 million related primarily to litigation matters described in note 16 of the notes to our consolidated financial statements. Accounting and consulting fees increased by $0.8 million due to expenses incurred for our 2009 audit and quarterly reviews and the establishment of our subsidiary in Singapore. Other professional fees increased by $0.4 million for consulting services in information technology and human resource functions. General and administrative headcount increased, resulting in a $1.4 million increase in personnel costs and stock-based compensation expense.

Provision (benefit) for Income Taxes

 

            Change  
     Year Ended December 31,      2011     2010  
     2011     2010     2009      Amount      %     Amount     %  
     (dollars in thousands)  

Provision (benefit) for income taxes

   $ (1,218   $ (14,242   $ 829       $ 13,024         91   $ (15,071     N/M   

The income tax benefit of $1.2 million for the year ended December 31, 2011 reflects an effective tax rate benefit of 171%. The effective tax rate benefit of 171% for the year ended December 31, 2011 differs from the statutory rate of 35% primarily due to prior year provision true-up for a worldwide combined filing basis on California tax return and, foreign income taxes provided at lower rates, geographic mix in profitability and recognition of federal research and development credits. We recorded a benefit of $1,244 to our 2011 income tax provision for a prior year return to provision adjustment, which primarily relates to California state income taxes. We file an income tax return in California the laws of which generally require the results of all affiliated companies, both domestic and foreign, that are engaged in a unitary business to be included in the California return (i.e., worldwide combined reporting basis). However, California law also provides that a California company may make a so-called “Water’s Edge” election which limits the results included in the combined reporting to only the companies that are subject to tax in the United States. Once a California Water’s Edge election is made with a timely filed California tax return, the filing Company is required to file using the Water’s Edge for seven years. 2010 was the first year we were subject to the California worldwide combined reporting method. As of December 31, 2010, we intended to make the Water’s Edge election with the 2010 California income tax return and recorded our 2010 state income tax expense based upon this method. However, in October 2011, we filed our 2010 California tax return on a worldwide combined reporting basis rather than making the Water’s Edge election. Our decision to file the 2010 California income tax return on a worldwide combined reporting basis was a result of information and circumstances arising in 2011 surrounding expectations of future taxable income under each filing election.

 

52


Table of Contents

The income tax benefit of $14.2 million for the year ended December 31, 2010 reflects an effective tax rate benefit of 120%. The effective tax rate benefit of 120% for the year ended December 31, 2010 differs from the statutory rate of 35% primarily due to a release of our deferred tax valuation allowance of $24 million and, to a lesser extent, foreign income taxes provided at lower rates, geographic mix in profitability and recognition of federal research and development credits.

We operate under tax holiday in Singapore, which is effective through May 2020. The tax holiday is conditional upon our meeting certain employment, activities and investment thresholds. The impact of the Singapore tax holiday decreased Singapore taxes by $95 for 2011 and was not material for 2010. The benefit of tax holidays has no material impact on diluted earnings per share.

The provision for income taxes in 2009 consisted of state income taxes recorded due to our inability to use net operating loss carryforwards for state tax purposes in California and federal income taxes related to alternative minimum tax.

Liquidity and Capital Resources

As of December 31, 2011, we had cash and cash equivalents and investments in marketable securities of $119 million. Our primary uses of cash are to fund operating expenses, purchase inventory and acquire property and equipment. Cash used to fund operating expenses is impacted by the timing of when we pay these expenses, as reflected in the changes in our outstanding accounts payable and accrued expenses. Our primary sources of cash are cash receipts on accounts receivable from our revenue. Aside from the growth in amounts billed to our customers, net cash collections of accounts receivable are impacted by the efficiency of our cash collections process, which can vary from period to period, depending on the payment cycles of our major customers.

The following table summarizes our cash flows for the periods indicated:

 

     Years Ended December 31,  
     2011     2010     2009  
     (in thousands)  

Net cash provided by operating activities

   $ 9,603      $ 12,361      $ 9,849   

Net cash used in investing activities

     (95,674     (7,664     (556

Net cash provided by financing activities

     5,596        86,365        716   

Effect of currency exchange rate on cash

     (1     49        —     
  

 

 

   

 

 

   

 

 

 

Net increase (decrease) in cash and cash equivalents

   $ (80,476   $ 91,111      $ 10,009   
  

 

 

   

 

 

   

 

 

 

Net Cash Provided by Operating Activities

Net cash provided by operating activities in 2011 primarily reflected net income of $1.9 million, change in income tax receivable/payable by $2.7 million, depreciation and amortization of $3.2 million, stock-based compensation of $7.2 million, impairment charges of $1.6 million and amortization and adjustment of deferred tax charge of $1.2 million, offset by increases in inventory of $0.6 million, prepaid expenses and other assets of $1.0 million, deferred income taxes of $5.2 million and decreases in accounts payable of $1.0 million and deferred revenue of $0.7 million. Our inventories increased as a result of growing production for immediate delivery to customers in the first quarter of 2012. Our prepaid expenses and other assets increased as a result of new subscriptions with vendors and related prepayments. Our accounts payable decreased due to payment to vendors. Our deferred revenue decreased as distributors reduced their inventory levels and shipped parts to end customers to meet their demand.

Net cash provided by operating activities in 2010 primarily reflected net income of $26.1 million, increases to accounts payable and accrued expenses of $1.3 million, depreciation and amortization of $1.8 million and

 

53


Table of Contents

stock-based compensation of $2.7 million offset by increases in inventory of $0.6 million, accounts receivable of $1.9 million, deferred income taxes of $16.1 million and decrease in income tax payable of $1.4 million. Our accounts payable and accrued expenses increased as a result of increased production volumes. Our inventories increased as a result of growing production for immediate delivery to customers in the first quarter of 2011, and accounts receivable increased as a result of increased shipments.

Net cash provided by operating activities in 2009 primarily reflected net income of $7.3 million, increases to accounts payable of $1.4 million, accrued expense of $1.1 million and deferred revenue of $1.6 million, depreciation of $1.3 million and stock-based compensation of $1.2 million. These were offset by an increase in receivables of $4.6 million. Our accounts payable and accrued expenses increased in 2009 to support our increased production volumes and overall operational growth. Our deferred revenue increased due to payments received from customers for future shipments. Our accounts receivable increased as a result of significantly higher product shipments in the fourth quarter of 2009 to meet customer demand.

Net Cash Used in Investing Activities

In 2011, net cash used in investing activities consisted of cash used to purchase investment in marketable securities of $125 million and purchases of property, equipment of $5.2 million, mainly for laboratory and production equipment and leasehold improvements for our offices in California, offset by sales and maturities of marketable securities of $34.5 million.

In 2010, net cash used in investing activities consisted of net cash used to acquire all of the outstanding shares of Winyatek Technology Inc. of $2.5 million and purchases of property, equipment of $5.2 million, of which $1.9 million was invested in leasehold improvements, including new laboratories, in connection with our move to our new facilities.

Net cash used in investing activities during the year ended December 31, 2009 consisted of purchases of property and equipment of $0.6 million.

Net Cash Provided by Financing Activities

Net cash provided by financing activities in 2011, consisted primarily of $4.5 million proceeds from exercise of stock options and warrants, excess tax benefit related to stock-based compensation of $1.2 million and net proceeds for secondary offering of $1.0 million. This was offset, in part, by the payment of $1.1 million of expenses related to our initial public offering.

Net cash provided by financing activities in 2010 consisted primarily of $85.7 million net proceeds from the sale of common stock in our initial public offering, the proceeds from the exercise of stock options of $0.5 million and the excess tax benefit related to stock-based compensation of $0.2 million.

Net cash provided by financing activities in 2009 consisted primarily of $0.7 million in proceeds from the exercise of stock options.

Operating and Capital Expenditure Requirements

Our principal source of liquidity as of December 31, 2011 consisted of $119 million of cash, cash equivalents and investments in marketable securities. Based on our current operating plan, we believe that our existing cash and cash equivalents and investments in marketable securities from operations will be sufficient to finance our operational cash needs through at least the next 12 to 18 months. In the future, we expect our operating and capital expenditures to increase as we increase headcount, expand our business activities and grow our end customer base which will result in higher needs for working capital. Our ability to generate cash from operations is also subject to substantial risks described in Part I, “Item 1A., Risk Factors.” If any of these risks

 

54


Table of Contents

occur, we may be unable to generate or sustain positive cash flow from operating activities. We would then be required to use existing cash and cash equivalents to support our working capital and other cash requirements. If additional funds are required to support our working capital requirements, acquisitions or other purposes, we may seek to raise funds through debt financing or from other sources. If we raise additional funds through the issuance of equity or convertible debt securities, the percentage ownership of our stockholders could be significantly diluted, and these newly-issued securities may have rights, preferences or privileges senior to those of existing stockholders. If we raise additional funds by obtaining loans from third parties, the terms of those financing arrangements may include negative covenants or other restrictions on our business that could impair our operating flexibility, and would also require us to incur interest expense. We can provide no assurance that additional financing will be available at all or, if available, that we would be able to obtain additional financing on terms favorable to us.

Contractual Obligations, Commitments and Contingencies

The following table summarizes our outstanding contractual obligations as of December 31, 2011:

 

     Payments due by period  
     Total      Less
Than
1 Year
     1-3
Years
     3-5
Years
     More
Than
5 Years
 
     (in thousands)  

Operating lease obligations

   $ 11,234       $ 3,718       $ 5,710       $ 1,806       $ —     

As of December 31, 2011, we had noncancelable purchase obligations consisting primarily of license and consulting fees the Company committed to pay under several agreements of $0.8 million, which are payable in 2012.

As of December 31, 2011, we recorded a liability for our uncertain tax position of $1.5 million. We are unable to reasonably estimate the timing of payments in individual years due to uncertainties in the timing of the effective settlement of tax positions.

We depend upon third party subcontractors to manufacture our wafers. Our subcontractor relationships typically allow for the cancellation of outstanding purchase orders, but require payment of all expenses incurred through the date of cancellation. As of December 31, 2011, the total value of open purchase orders for wafers was approximately $2.4 million.

Off-Balance Sheet Arrangements

Since our inception, we have not engaged in any off-balance sheet arrangements, such as the use of structured finance, special purpose entities or variable interest entities.

Recent Authoritative Accounting Guidance

See Note 1 of the notes to our consolidated financial statements for information regarding recently issued accounting pronouncements.

 

55


Table of Contents
ITEM 7A. QUANTITATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK

Interest Rate Sensitivity

We had cash and cash equivalents and investments in marketable securities of $119.0 million and $110.2 million at December 31, 2011 and December 31, 2010, respectively, which was held for working capital purposes. Our exposure to market interest-rate risk relates primarily to our investment portfolio. We do not use derivative financial instruments to hedge the market risks of our investments. We manage our total portfolio to encompass a diversified pool of investment-grade securities to preserve principal and maintain liquidity. We place our investments with high-quality issuers, money market funds and debt securities. Our investment portfolio as of December 31, 2011 consisted of money market funds, U.S. Treasuries, municipal bonds, corporate bonds, commercial paper, certificates of deposit, variable rate demand notes and asset backed securities. Investments in both fixed rate and floating rate instruments carry a degree of interest rate risk. Fixed rate securities may have their market value adversely impacted due to an increase in interest rates, while floating rate securities may produce less income than expected if interest rates fall. Due in part to these factors, our future investment income may fall short of expectations due to changes in interest rates or if the decline in fair value of our publicly traded debt investments is judged to be other-than-temporary. We may suffer losses in principal if we are forced to sell securities that have declined in market value due to changes in interest rates. However, because any debt securities we hold are classified as available-for-sale, no gains or losses are realized in the income statement due to changes in interest rates unless such securities are sold prior to maturity or unless declines in value are determined to be other-than-temporary. These securities are reported at fair value with the related unrealized gains and losses, net of applicable taxes, included in accumulated other comprehensive income (loss), reported in a separate component of stockholders’ equity. Although, we currently expect that our ability to access or liquidate these investments as needed to support our business activities will continue, we cannot ensure that this will not change. We believe that, if market interest rates were to change immediately and uniformly by 10% from levels at December 31, 2011, the impact on the fair value of these securities or our cash flows or income would not be material.

In a declining interest rate environment, as short-term investments mature, reinvestment occurs at less favorable market rates. Given the short-term nature of certain investments, the current interest rate environment may negatively impact our investment income.

Our cash and cash equivalents and investment in marketable securities at December 31, 2011 consisted of $116.7 million held domestically, with the remaining balance of $2.3 million held by foreign subsidiaries. There may be adverse tax effects upon repatriation of these funds to the United States. We do not plan to repatriate cash balances from foreign subsidiaries to fund our operations in the United States.

Foreign Currency Risk

To date, our international customer and vendor agreements have been denominated almost exclusively in United States dollars. Accordingly, we have limited exposure to foreign currency exchange rates and do not currently enter into foreign currency hedging transactions.

 

56


Table of Contents
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA

Index to Consolidated Financial Statements

 

Report of Independent Registered Public Accounting Firm

     58   

Consolidated Balance Sheets

     59   

Consolidated Statements of Operations

     60   

Consolidated Statements of Convertible Preferred Stock and Stockholders’ Equity (Deficit)

     61   

Consolidated Statements of Cash Flows

     63   

Notes to Consolidated Financial Statements

     64   

 

57


Table of Contents

Report of Independent Registered Public Accounting Firm

To the Board of Directors and Stockholders of Inphi Corporation:

In our opinion, the accompanying consolidated balance sheets and the related consolidated statements of operations, of convertible preferred stock and stockholders’ equity (deficit) and of cash flows present fairly, in all material respects, the financial position of Inphi Corporation and its subsidiaries at December 31, 2011 and 2010, and the results of their operations and their cash flows for each of the three years in the period ended December 31, 2011 in conformity with accounting principles generally accepted in the United States of America. Also in our opinion, the Company maintained, in all material respects, effective internal control over financial reporting as of December 31, 2011, based on criteria established in Internal Control—Integrated Framework issued by the Committee of Sponsoring Organizations of the Treadway Commission (COSO). The Company’s management is responsible for these financial statements, for maintaining effective internal control over financial reporting and for its assessment of the effectiveness of internal control over financial reporting, included in Management’s Annual Report on Internal Control over Financial Reporting appearing under Item 9A. Our responsibility is to express opinions on these financial statements and on the Company’s internal control over financial reporting based on our audits (which was an integrated audit in 2011). We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audits to obtain reasonable assurance about whether the financial statements are free of material misstatement and whether effective internal control over financial reporting was maintained in all material respects. Our audits of the financial statements included examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, and evaluating the overall financial statement presentation. Our audit of internal control over financial reporting included obtaining an understanding of internal control over financial reporting, assessing the risk that a material weakness exists, and testing and evaluating the design and operating effectiveness of internal control based on the assessed risk. Our audits also included performing such other procedures as we considered necessary in the circumstances. We believe that our audits provide a reasonable basis for our opinions.

A company’s internal control over financial reporting is a process designed to provide reasonable assurance regarding the reliability of financial reporting and the preparation of financial statements for external purposes in accordance with generally accepted accounting principles. A company’s internal control over financial reporting includes those policies and procedures that (i) pertain to the maintenance of records that, in reasonable detail, accurately and fairly reflect the transactions and dispositions of the assets of the company; (ii) provide reasonable assurance that transactions are recorded as necessary to permit preparation of financial statements in accordance with generally accepted accounting principles, and that receipts and expenditures of the company are being made only in accordance with authorizations of management and directors of the company; and (iii) provide reasonable assurance regarding prevention or timely detection of unauthorized acquisition, use, or disposition of the company’s assets that could have a material effect on the financial statements.

Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with the policies or procedures may deteriorate.

/s/ PRICEWATERHOUSECOOPERS LLP

San Jose, California

March 15, 2012

 

58


Table of Contents

Inphi Corporation

Consolidated Balance Sheets

(in thousands, except share and per share amounts)

 

     December 31,  
     2011     2010  

Assets

    

Current assets:

    

Cash and cash equivalents

   $ 29,696      $ 110,172   

Investments in marketable securities

     89,283        —     

Accounts receivable, net

     9,358        10,052   

Inventories

     5,716        5,095   

Deferred tax assets

     1,463        1,665   

Income tax receivable

     2,103        2,214   

Prepaid expenses and other current assets

     2,466        1,366   
  

 

 

   

 

 

 

Total current assets

     140,085        130,564   

Property and equipment, net

     9,566        7,206   

Goodwill

     5,875        5,847   

Identifiable intangible assets, net

     —          1,624   

Deferred tax assets

     10,673        6,182   

Deferred tax charge

     6,101        7,293   

Other assets, net

     328        241   
  

 

 

   

 

 

 

Total assets

   $ 172,628      $ 158,957   
  

 

 

   

 

 

 

Liabilities and Stockholders’ Equity

    

Current liabilities:

    

Accounts payable

   $ 5,016      $ 6,692   

Deferred revenue

     1,929        2,647   

Accrued employee expenses

     1,703        1,749   

Other accrued expenses

     2,042        1,843   

Other current liabilities

     —          746   
  

 

 

   

 

 

 

Total current liabilities

     10,690        13,677   

Other long-term liabilities

     3,534        2,594   
  

 

 

   

 

 

 

Total liabilities

     14,224        16,271   
  

 

 

   

 

 

 

Commitments and contingencies (Note 16)

    

Stockholders’ equity:

    

Preferred stock, $0.001 par value; 10,000,000 shares authorized; no shares issued

     —          —     

Common stock, $0.001 par value; 500,000,000 shares authorized; 27,882,223 and 25,088,122 issued and outstanding at December 31, 2011 and 2010, respectively

     28        25   

Additional paid-in capital

     190,314        176,505   

Accumulated deficit

     (32,713     (34,644

Accumulated other comprehensive income

     775        800   
  

 

 

   

 

 

 

Total stockholders’ equity

     158,404        142,686   
  

 

 

   

 

 

 

Total liabilities and stockholders’ equity

   $ 172,628      $ 158,957   
  

 

 

   

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

59


Table of Contents

Inphi Corporation

Consolidated Statements of Operations

(in thousands, except share and per share amounts)

 

     Year Ended December 31,  
     2011     2010     2009  

Revenue(1)

   $ 79,297      $ 83,193      $ 58,852   

Cost of revenue

     28,687        29,438        21,269   
  

 

 

   

 

 

   

 

 

 

Gross profit

     50,610        53,755        37,583   
  

 

 

   

 

 

   

 

 

 

Operating expense:

      

Research and development

     28,565        23,781        17,847   

Sales and marketing

     12,700        8,823        7,704   

General and administrative

     9,141        9,212        3,947   
  

 

 

   

 

 

   

 

 

 

Total operating expense

     50,406        41,816        29,498   
  

 

 

   

 

 

   

 

 

 

Income from operations

     204        11,939        8,085   

Interest and other income (expense)

     509        (50     73   
  

 

 

   

 

 

   

 

 

 

Income before income taxes

     713        11,889        8,158   

Provision (benefit) for income taxes

     (1,218     (14,242     829   
  

 

 

   

 

 

   

 

 

 

Net income

   $ 1,931      $ 26,131      $ 7,329   
  

 

 

   

 

 

   

 

 

 

Net income allocable to common stockholders and participating common securities

   $ 1,931      $ 5,326      $ 136   
  

 

 

   

 

 

   

 

 

 

Earnings per share:

      

Basic

   $ 0.07      $ 1.03      $ 0.08   
  

 

 

   

 

 

   

 

 

 

Diluted

   $ 0.07      $ 0.61      $ 0.05   
  

 

 

   

 

 

   

 

 

 

Weighted-average shares used in computing earnings per share:

      

Basic

     26,799,237        5,086,169        1,668,876   

Diluted

     29,367,423        8,546,537        2,785,277   

  

 

(1) Includes related party revenue of $27,940 and $21,235 for the years ended December 31, 2010 and 2009, respectively—see Note 17 of notes to the consolidated financial statements.

The accompanying notes are an integral part of these consolidated financial statements.

 

60


Table of Contents

Inphi Corporation

Consolidated Statements of Convertible Preferred Stock and Stockholders’ Equity (Deficit)

(in thousands, except share amounts)

 

    Series A
Convertible
Preferred

Stock
    Series B
Redeemable
Convertible
Preferred
Stock
    Series C
Redeemable
Convertible
Preferred
Stock
    Series D
Redeemable
Convertible
Preferred

Stock
    Series E
Redeemable
Convertible
Preferred
Stock
    Total
Preferred
Stock
 
    Shares     Amount     Shares     Amount     Shares     Amount     Shares     Amount     Shares     Amount    

Balance at December 31, 2008

    518,555      $ 12,016        2,905,783      $ 24,985        6,503,882      $ 18,690        3,509,749      $ 11,989        1,043,731      $ 9,936      $ 77,616   

Exercise of stock options

    —          —          —          —          —          —          —          —          —          —          —     

Stock-based compensation expense

    —          —          —          —          —          —          —          —          —          —          —     

Net income

    —          —          —          —          —          —          —          —          —          —          —     
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2009

    518,555        12,016        2,905,783        24,985        6,503,882        18,690        3,509,749        11,989        1,043,731        9,936        77,616   

Exercise of stock options, warrant and restricted stock award grant

    —          —          —          —          —          —          —          —          —          —          —     

Income tax benefit from stock option exercises

    —          —          —          —          —          —          —          —          —          —          —     

Stock-based compensation expense

    —          —          —          —          —          —          —          —          —          —          —     

Issuance of preferred stock

    —          —          —          —          —          —          —          —          313,713        4,538        4,538   

Issuance of common stock in connection with initial public offering, net

    —          —          —          —          —          —          —          —          —          —          —     

Conversion of preferred stock to common stock

    (518,555     (12,016     (2,905,783     (24,985     (6,503,882     (18,690     (3,509,749     (11,989     (1,357,444     (14,474     (82,154

Conversion of preferred stock warrant to common stock warrant

    —          —          —          —          —          —          —          —          —          —          —     

Net income

    —          —          —          —          —          —          —          —          —          —          —     

Currency translation adjustment

    —          —          —          —          —          —          —          —          —          —          —     
                     

Total comprehensive income

    —          —          —          —          —          —          —          —          —          —          —     
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2010

    —        $ —          —        $ —          —        $ —          —        $ —          —        $ —        $ —     

Exercise of stock options, warrant and restricted stock award grant

    —          —          —          —          —          —          —          —          —          —          —     

Income tax benefit from stock option exercises

    —          —          —          —          —          —          —          —          —          —          —     

Stock-based compensation expense

    —          —          —          —          —          —          —          —          —          —          —     

Issuance of common stock in connection with secondary public offering, net

    —          —          —          —          —          —          —          —          —          —          —     

Net income

    —          —          —          —          —          —          —          —          —          —          —     

Currency translation adjustment

    —          —          —          —          —          —          —          —          —          —          —     

Unrealized loss on marketable securities, net

    —          —          —          —          —          —          —          —          —          —          —     
                     

Total comprehensive income

    —          —          —          —          —          —          —          —          —          —          —     
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

Balance at December 31, 2011

    —        $ —          —        $ —          —        $ —          —        $ —          —        $ —        $ —     
 

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

   

 

 

 

 

61


Table of Contents

 

     Common Stock      Additional
Paid-in
Capital
     Accumulated
Deficit
    Accumulated
Other
Comprehensive
Income
    Total
Stockholders’

Equity
(Deficit)
 
     Shares      Amount            

Balance at December 31, 2008

     1,577,975       $ 2       $ 4,301       $ (68,104     —        $ (63,801

Exercise of stock options

     455,567         —           575         —          —          575   

Stock-based compensation expense

     —           —           1,165         —          —          1,165   

Net income

     —           —           —           7,329        —          7,329   
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Balance at December 31, 2009

     2,033,542         2         6,041         (60,775     —          (54,732

Exercise of stock options, warrant and restricted stock award grant

     439,167         —           584         —          —          584   

Income tax benefit from stock option exercises

     —           —           216         —          —          216   

Stock-based compensation expense

     —           —           2,705         —          —          2,705   

Issuance of preferred stock

     —           —           —           —          —          —     

Issuance of common stock in connection with initial public offering, net

     7,820,000         8         84,690         —          —          84,698   

Conversion of preferred stock to common stock

     14,795,413         15         82,139         —          —          82,154   

Conversion of preferred stock warrant to common stock warrant

     —           —           130         —          —          130   

Net income

     —           —           —           26,131        —          26,131   

Currency translation adjustment

     —           —           —           —          800        800   
               

 

 

 

Total comprehensive income

     —           —           —           —          —          26,931   
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Balance at December 31, 2010

     25,088,122       $ 25       $ 176,505       $ (34,644   $ 800      $ 142,686   

Exercise of stock options, warrant and restricted stock award grant

     2,694,101         2         4,532         —          —          4,534   

Income tax benefit from stock option exercises

     —           —           1,171         —          —          1,171   

Stock-based compensation expense

     —           —           7,192         —          —          7,192   

Issuance of common stock in connection with secondary public offering, net

     100,000         1         914         —          —          915   

Net income

     —           —           —           1,931        —          1,931   

Currency translation adjustment

     —           —           —           —          30        30   

Unrealized loss on marketable securities, net

     —           —           —           —          (55     (55
               

 

 

 

Total comprehensive income

     —           —           —           —          —          1,906   
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

Balance at December 31, 2011

     27,882,223       $ 28       $ 190,314       $ (32,713   $ 775      $ 158,404   
  

 

 

    

 

 

    

 

 

    

 

 

   

 

 

   

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

62


Table of Contents

Inphi Corporation

Consolidated Statements of Cash Flows

(in thousands)

 

     Year Ended December 31,  
     2011     2010     2009  

Cash flows from operating activities

      

Net income

   $ 1,931      $ 26,131      $ 7,329   

Adjustments to reconcile net income to net cash provided by operating activities:

      

Depreciation and amortization

     3,185        1,820        1,291   

Stock-based compensation

     7,192        2,705        1,165   

Impairment charges

     1,612        —          —     

Deferred income taxes and deferred tax charge

     (5,192     (16,054     —     

Amortization and adjustment of deferred tax charge

     1,192        746        —     

Excess tax benefit related to stock-based compensation

     (1,171     (216     —     

Amortization of premiums on marketable securities

     920        —          —     

Other noncash items

     (20     89        27   

Changes in assets and liabilities (net of effect of acquisition):

      

Accounts receivable

     696        (1,890     (4,588

Inventories

     (621     (627     143   

Prepaid expenses and other assets

     (1,027     (1,083     (88

Income tax payable/receivable

     2,745        (1,442     444   

Accounts payable

     (1,005     344        1,413   

Accrued expenses

     148        965        1,062   

Deferred revenue

     (718     (736     1,605   

Other liabilities

     (264     1,609        46   
  

 

 

   

 

 

   

 

 

 

Net cash provided by operating activities

     9,603        12,361        9,849   
  

 

 

   

 

 

   

 

 

 

Cash flows from investing activities

      

Purchases of property and equipment

     (5,197     (5,165     (560

Proceeds from sale of property and equipment

     9        —          4   

Purchases of marketable securities

     (124,986     —          —     

Sales and maturities of marketable securities

     34,500        —          —     

Acquisition, net of cash acquired

     —          (2,499     —     
  

 

 

   

 

 

   

 

 

 

Net cash used in investing activities

     (95,674     (7,664     (556
  

 

 

   

 

 

   

 

 

 

Cash flows from financing activities

      

Repayment of capital lease obligations

     —          —          (17

Proceeds from exercise of stock options and warrants

     4,525        485        733   

Excess tax benefit related to stock-based compensation

     1,171        216        —     

Minimum tax withholding paid on behalf of employees for restricted stock units

     (51     —          —     

Proceeds from the secondary public offerings, net of issuance costs

     1,050        —          —     

Proceeds from initial public offering, net of costs paid

     (1,099     85,664        —     
  

 

 

   

 

 

   

 

 

 

Net cash provided by financing activities

     5,596        86,365        716   
  

 

 

   

 

 

   

 

 

 

Effect of currency exchange rates on cash and cash equivalents

     (1     49        —     
  

 

 

   

 

 

   

 

 

 

Net increase (decrease) in cash and cash equivalents

     (80,476     91,111        10,009   

Cash and cash equivalents at beginning of year

     110,172        19,061        9,052   
  

 

 

   

 

 

   

 

 

 

Cash and cash equivalents at end of year

   $ 29,696      $ 110,172      $ 19,061   
  

 

 

   

 

 

   

 

 

 

Supplemental Cash Flow Information

      

Income taxes paid

   $ —        $ 2,502      $ 381   
  

 

 

   

 

 

   

 

 

 

Noncash investing and financing activities

      

Acquisition of Winyatek Technology Inc. in exchange for Series E preferred shares

   $ —        $ 4,538        —     

Conversion of preferred stock to common stock

     —          82,154        —     

Conversion of preferred stock warrant to common stock warrant

     —          130        —     

Unrealized loss on investment, net of tax

     55        —          —     
  

 

 

   

 

 

   

 

 

 

The accompanying notes are an integral part of these consolidated financial statements.

 

63


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements

(Dollars in thousands except share and per share amounts)

1. Organization and Summary of Significant Accounting Policies

Inphi Corporation (the “Company”), a Delaware corporation, was incorporated in November 2000. The Company is a fabless provider of high-speed analog semiconductor solutions for the communications and computing markets. The Company’s semiconductor solutions are designed to address bandwidth bottlenecks in networks, maximize throughput and minimize latency in computing environments and enable the rollout of next generation communications and computing infrastructures. In addition, the semiconductor solutions provide a vital high-speed interface between analog signals and digital information in high-performance systems such as telecommunications transport systems, enterprise networking equipment, datacenter and enterprise servers, storage platforms, test and measurement equipment and military systems.

The Company is subject to certain risks and uncertainties and believes changes in any of the following areas could have a material adverse effect on the Company’s future financial position or results of operations or cash flows: ability to sustain profitable operations due to history of losses and accumulated deficit, dependence on limited number of customers for a substantial portion of revenue, product defects, risks related to intellectual property matters, lengthy sales cycle and competitive selection process, lengthy and expensive qualification process, ability to develop new or enhance products in a timely manner, market development of and demand for the Company’s products, reliance on third parties to manufacture, assemble and test products and ability to compete.

Basis of Presentation

The accompanying financial statements through December 31, 2009 reflect the stand-alone operations of the Company. During the year ended December 31, 2010, the Company established subsidiaries in the United Kingdom, Singapore, and Taiwan. All significant intercompany balances and transactions have been eliminated in consolidation.

In the third quarter of 2011, the Company decided to discontinue the sale of legacy products supported by its Taiwan subsidiary and transitioned the subsidiary to be a design and sales support center. The associated restructuring expense was $1,813, of which $1,408 relates to write off of certain intangibles (see note 7), $204 relates to write off of other assets and $198 relates to severance costs. The severance costs were fully paid in 2011 except for $95, which is included in accrued employee expenses in the consolidated balance sheets as of December 31, 2011.

Reverse Stock Split

In October 2010, the Company’s Board of Directors approved a 3-for-7 reverse stock split of the Company’s issued and outstanding shares of common stock and preferred stock, which was effected on November 3, 2010. All common stock and preferred stock data and stock option plan information have been adjusted to reflect the split.

Initial Public Offering

In November 2010, the Company completed the initial public offering (the “IPO”), of its common stock in which it sold and issued 7,820,000 shares of common stock, including 1,020,000 shares related to the exercise of the underwriters’ over-allotment, at an issue price of $12.00 per share. The Company raised a total of $93,840 in gross proceeds in the IPO, or approximately $84,698 in net proceeds after deducting underwriting discounts and commissions of $6,569 and other offering costs of $2,573. Immediately prior to the closing of the IPO, all shares

 

64


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

of the Company’s then-outstanding convertible preferred stock outstanding automatically converted into 14,795,413 shares of common stock and the warrants to purchase preferred stock converted into warrants to purchase common stock.

Use of Estimates

The preparation of consolidated financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenue and expenses during the reporting period. Actual results could differ from those estimates.

On an ongoing basis, management evaluates its estimates, including those related to (i) the collectibility of accounts receivable; (ii) write down for excess and obsolete inventories; (iii) warranty obligations; (iv) the value assigned to and estimated useful lives of long-lived assets; (v) the realization of tax assets and estimates of tax liabilities and tax reserves; (vi) the valuation of equity securities; (vii) amounts recorded in connection with acquisitions; (viii) recoverability of intangible assets and goodwill and (ix) the recognition and disclosure of contingent liabilities. These estimates are based on historical data and experience, as well as various other factors that management believes to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. The Company engages third party valuation specialists to assist with estimates related to the valuation of financial instruments and assets associated with various contractual arrangements, the underlying value of preferred and common equity prior to the Company’s IPO and valuation of assets acquired in connection with acquisitions. Such estimates often require the selection of appropriate valuation methodologies and models, and significant judgment in evaluating ranges of assumptions and financial inputs. Actual results may differ from those estimates under different assumptions or circumstances.

Foreign Currency Translation

The Company and its subsidiaries use the U.S. dollar as its functional currency. Foreign currency assets and liabilities are remeasured into U.S. dollars at the end-of-period exchange rates except for non-monetary assets and liabilities, which are remeasured at historical exchange rates. Revenue and expenses are remeasured at the exchange rate in effect during the period the transaction occurred, except for those expenses related to balance sheet amounts, which are remeasured at historical exchange rates. Gains or losses from foreign currency transactions are included in the Consolidated Statements of Operations as part of “Other income (expense)”. Foreign currency gain or loss in 2011, 2010 and 2009 were not material.

The functional currency of the Company’s Taiwan subsidiary was the New Taiwan Dollar through the first two quarters of 2011, which required that assets and liabilities be translated into US dollars at period-end exchange rates and income, expense, and cash flow items be translated at average exchange rates prevailing during the period. The resulting currency translation adjustment is recorded as a component of accumulated other comprehensive income within stockholders’ equity. As discussed above, in 2011, the Company transitioned its Taiwan subsidiary to be a design and sales support center. The restructuring brought about a change in the subsidiary’s functional currency designation from Taiwan dollars to United States dollars.

Cash and Cash Equivalents

The Company considers all highly liquid investments with an original or remaining maturity of three months or less at the date of purchase to be cash equivalents. The Company maintains its cash and cash

 

65


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

equivalents with major financial institutions and, at times, such balances with any one financial institution may exceed Federal Deposit Insurance Corporation insurance limits. Cash equivalents primarily consist of money market funds.

Fair Market Value of Financial Instruments

The carrying amount reflected in the balance sheet for cash and cash equivalents, accounts receivable, prepaid and other current assets, accounts payable, accrued expenses and other current liabilities, approximate fair value due to the short-term nature of these financial instruments.

Investments in Marketable Securities

Investments in marketable securities consist of available-for-sale securities. These investments are recorded at fair value with changes in fair value, net of applicable taxes, recorded as unrealized gains (losses) as a component of accumulated other comprehensive income in stockholders’ equity. Realized gains and losses and declines in value judged to be other-than-temporary on available-for-sale securities are included in Other (expense) income, net. The cost basis for realized gains and losses on available-for-sale securities is determined on a specific identification basis. Investments are made based on our investment policy which restricts the types of investments that can be made. The Company classified available-for-sale securities as short-term as the investments are available to be used in current operations.

Inventories

Inventories are stated at the lower of cost or market. Cost is computed using standard cost, which approximates actual cost, on a first-in, first-out basis. Inventories are reduced for write downs based on periodic reviews for evidence of slow-moving or obsolete parts. The write-down is based on comparison between inventory on hand and estimated future sales for each specific product. Once written down, inventory write downs are not reversed until the inventory is sold or scrapped. Inventory write downs are also established when conditions indicate that the net realizable value is less than cost due to physical deterioration, obsolescence, changes in price level or other causes. Inventory valuation reserves were $1,509 and $1,372, as of December 31, 2011 and 2010, respectively.

 

66


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

Property and Equipment

Property and equipment are stated at cost less accumulated depreciation and amortization. Depreciation and amortization is provided on property and equipment over the estimated useful lives on a straight-line basis. Leasehold improvements are amortized on a straight-line basis over the shorter of their estimated useful lives or lease terms. Repairs and maintenance are charged to expense as incurred. Useful lives by asset category are as follows:

 

Asset Category

  

Years

Office equipment

   3 years

Software

   3 years

Leasehold improvements

   Shorter of lease
term or estimated
useful life

Production equipment

   2 years

Computer equipment

   5 years

Lab equipment

   5 years

Furniture and fixtures

   7 years

Impairment of Long-lived Assets and Goodwill

Long-lived Assets

The Company assesses the impairment of long-lived assets, which consist primarily of property and equipment and intangible assets, whenever events or changes in circumstances indicate that such assets might be impaired and the carrying value may not be recoverable. Events or changes in circumstances that may indicate that an asset is impaired include significant decreases in the market value of an asset, significant underperformance relative to expected historical or projected future results of operations, a change in the extent or manner in which an asset is utilized, significant declines in the estimated fair value of the overall Company for a sustained period, shifts in technology, loss of key management or personnel, changes in the Company’s operating model or strategy and competitive forces.

If events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable and the expected undiscounted future cash flows attributable to the asset are less than the carrying amount of the asset, an impairment loss equal to the excess of the asset’s carrying value over its fair value is recorded. Fair value is determined based on the present value of estimated expected future cash flows using a discount rate commensurate with the risk involved, quoted market prices or appraised values, depending on the nature of the assets.

Goodwill

Goodwill is recorded when the consideration paid for a business acquisition exceeds the fair value of net tangible and intangible assets acquired. Goodwill is measured and tested for impairment on an annual basis during the fourth fiscal quarter or more frequently if the Company believes indicators of impairment exist.

The performance of the test involves a two-step process. The first step requires comparing the fair value of the reporting unit to its net book value, including goodwill. As the Company has only one reporting unit, the fair value of the reporting unit is determined by taking the market capitalization of the Company as determined through quoted market prices and adjusted for control premiums and other relevant factors. A potential

 

67


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

impairment exists if the fair value of the reporting unit is lower than its net book value. The second step of the process is only performed if a potential impairment exists, and it involves determining the difference between the fair value of the reporting unit’s net assets other than goodwill and the fair value of the reporting unit. If the difference is less than the net book value of goodwill, impairment exists and is recorded. In the event that the Company determines that the value of goodwill has become impaired, the Company will record an accounting charge for the amount of impairment during the fiscal quarter in which the determination is made. The Company has not been required to perform this second step of the process because the fair value of the reporting unit has significantly exceeded its book value at every measurement date.

Internal Use Software Costs

Certain external and internal computer software costs acquired for internal use are capitalized. Training costs and maintenance are expensed as incurred, while upgrades and enhancements are capitalized if it is probable that such expenditures will result in additional functionality. Capitalized costs are included within property and equipment.

Revenue Recognition

The Company’s products are fully functional at the time of shipment and do not require additional production, modification, or customization. The Company recognizes revenue when there is persuasive evidence of an arrangement, delivery has occurred, the fee is fixed or determinable, and collection is reasonably assured. The Company’s sales arrangements do not include multiple elements.

Product revenue is recognized upon shipment of product to customers, net of accruals for estimated sales returns and allowances, which to date, have not been significant. However, some of the Company’s sales are made through distributors under arrangements that allow for price protection or rights of return on product unsold by the distributors. Product revenue on sales made through distributors with rights of return or price protection is deferred until the distributors sell the product to end customers. Sales to distributors are included in deferred revenue and the Company includes the related costs in inventory until sale to the end customers occurs. Price protection rights allow distributors the right to a credit in the event of declines in the price of the Company’s product that they hold prior to the sale to an end customer. In the event that the Company reduces the selling price of products held by distributors, deferred revenue related to distributors with price protection rights is reduced upon notification to the customer of the price change. The Company’s sales to direct customers are made primarily pursuant to standard purchase orders for delivery of products. The Company generally allows customers to cancel or change purchase orders within limited notice periods prior to the scheduled shipment.

Cost of Revenue

Cost of revenue includes cost of materials, such as wafers processed by third-party foundries, cost associated with packaging and assembly, test and shipping, cost of personnel, including stock-based compensation, and equipment associated with manufacturing support, logistics and quality assurance, warranty cost, write down of inventories, amortization of production mask costs, overhead and an allocated portion of occupancy costs.

Warranty

The Company’s products are under warranty against defects in material and workmanship generally for a period of one or two years. The Company accrues for estimated warranty cost at the time of sale based on anticipated warranty claims and actual historical warranty claims experience including knowledge of specific

 

68


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

product failures that are outside of the Company’s typical experience. The warranty obligation is determined based on product failure rates, cost of replacement and failure analysis cost. If actual warranty costs differ significantly from these estimates, adjustments may be required in the future. As of December 31, 2011 and 2010, the warranty liability was $1,000 and $602, respectively.

The following table sets forth changes in warranty accrual included in other accrued expenses in the Company’s consolidated balance sheets:

 

     Year Ended December 31,  
         2011              2010      

Beginning balance

   $ 602       $ 450   

Accruals for warranties

     398         165   

Settlements

     —           (13
  

 

 

    

 

 

 
   $ 1,000       $ 602   
  

 

 

    

 

 

 

In September 2010, the Company was informed of a claim related to repair and replacement costs in connection with shipments of over 4,000 integrated circuits made by the Company during the summer and fall of 2009. Of these shipments, approximately 4% were later confirmed or suspected to have random manufacturing process anomalies in the wafer die in the product. These anomalies made the circuitry of a small number of random die per foundry wafer susceptible to failure under certain customer specific system operating conditions. At the time of shipment in 2009 and early 2010, the Company established an initial warranty reserve and added to that accrual as the problem was identified and reliable information became available. The foundry who produced the wafers has informed the Company that the random anomalies are normal in a Gallium Arsenide (“GaAs”) manufacturing process. The Company is currently investigating whether these anomalies were normal, or whether they could have been the result of a foundry manufacturing process that was not sufficiently robust to reliably produce a part that could deliver the specified performance.

In March 2010, the Company developed additional tests to screen out the wafer die that might be susceptible to this type of failure and resumed shipments to the customer. Based on its standard warranty provisions, the Company has provided replacement parts to the customer for the known and suspected failures that had occurred.

In addition and without informing the Company, in the fall of 2009 the customer instituted its own larger scale replacement program that covered the replacement of entire subassemblies in which the Company’s product was only one component. In September 2010, the customer made an initial claim for approximately $18,000 against the Company for the costs incurred relative to that program. In June 2011, the customer sent an e-mail and reduced their initial claim down to $6,600. Management believes the amount and basis of the claims made to date are without merit as its warranty liability is contractually limited to the repair or replacement of the Company’s affected products, which to the extent the customer has requested replacement, has already been completed. A formal claim has yet to be made and discussions with the customer are ongoing. At this time, the Company believes its current warranty reserves are adequate to address the matter and that the Company’s obligations under its standard warranty provisions have been fulfilled. However, claims of this nature are subject to various risks and uncertainties and there can be no assurance that this matter will be resolved without further significant costs to the Company, including the potential for arbitration or litigation. If and when the amount of any additional loss, if any, becomes both probable and determinable, the Company may be required to record an incremental reserve.

 

69


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

Research and Development Expense

Research and development expense consists of costs incurred in performing research and development activities including salaries, stock-based compensation, employee benefits, occupancy costs, pre-production engineering mask costs, overhead costs and prototype wafer, packaging and test costs. Research and development costs are expensed as incurred.

Sales and Marketing Expense

Sales and marketing expense consists of salaries, stock-based compensation, employee benefits, travel and trade show costs. The Company expenses sales and marketing costs as incurred. Advertising expenses for the years ended December 31, 2011, 2010 and 2009 were not material.

General and Administrative Expense

General and administrative expense consists of salaries, stock-based compensation, employee benefits and expenses for executive management, legal, finance and human resources personnel. In addition, general and administrative expense includes fees for professional services and occupancy costs. These costs are expensed as incurred.

Income Taxes

Deferred tax assets and liabilities are determined based on differences between financial reporting and tax bases of assets and liabilities, and are measured using the enacted tax rates and laws that will be in effect when the differences are expected to reverse. The Company must also make judgments in evaluating whether deferred tax assets will be recovered from future taxable income. To the extent that it believes that recovery is not likely, the Company must establish a valuation allowance. The carrying value of the Company’s net deferred tax asset is based on whether it is more likely than not that the Company will generate sufficient future taxable income to realize these deferred tax assets. A valuation allowance is established for deferred tax assets which the Company does not believe meet the “more likely than not” criteria. The Company’s judgments regarding future taxable income may change over time due to changes in market conditions, changes in tax laws, tax planning strategies or other factors. If the Company’s assumptions and consequently its estimates change in the future, the valuation allowance the Company has established may be increased or decreased, resulting in a material respective increase or decrease in income tax expense (benefit) and related impact on the Company’s reported net income (loss).

In accordance with FASBs guidance on Accounting for Uncertainty in Income Taxes, the Company performs a comprehensive review of uncertain tax positions regularly. In this regard, an uncertain tax position represents an expected treatment of a tax position taken in a filed tax return, or planned to be taken in a future tax return or claim, which has not been reflected in measuring income tax expense for financial reporting purposes. Until these positions are sustained by the taxing authorities, the Company does not recognize the tax benefits resulting from such positions and reports the tax effects as a liability for uncertain tax positions in our consolidated financial statements. The Company recognizes potential interest and penalties on uncertain tax positions in income taxes on the consolidated statement of operations.

Stock-Based Compensation

Stock-based compensation for stock option and restricted stock awards issued to the Company’s employees is measured at the grant date based on the fair value of the award and is recognized as expense over the requisite

 

70


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

service period, which is the vesting period, on a straight-line basis. The Company uses the Black-Scholes option-pricing model for valuing stock option awards granted to employees and directors at the grant date. Determining the fair value of stock option awards at the grant date requires the input of various assumptions, including fair value of the underlying common stock, expected future share price volatility, expected term, risk-free interest rate and dividend rate. Changes in these assumptions can materially affect the fair value of the options. The Company based its estimate of expected volatility on the estimated volatility of similar entities whose share prices are publicly available. The risk-free interest rate is based on the U.S. Treasury yields in effect at the time of grant for periods corresponding to the expected life of the options. The weighted average expected life of options was calculated using the simplified method. This decision was based on the lack of relevant historical data due to the Company’s limited experience. The expected dividend yield is zero because the Company has not historically paid dividends and has no present intention to pay dividends. The Company establishes the estimated forfeiture rates based on historical experience. The value of the portion of the award that is ultimately expected to vest is recognized as expense over the requisite service period which is equal to the vesting period.

The Company has elected to treat share-based payment awards with graded vesting schedules and time-based service conditions as single awards and recognizes stock-based compensation expense on a straight-line basis (net of estimated forfeitures) over the requisite service period.

The Company recognizes non-employee stock-based compensation expenses based on the estimated fair value of the equity instrument determined using the Black-Scholes option-pricing model. Management believes that the fair value of the stock options is more reliably measured than the fair value of the services received. The fair value of each non-employee variable stock award is re-measured each period until a commitment date is reached, which is generally the vesting date.

Earnings per Share

The Company applies the two-class method for calculating earnings per share. Under the two–class method, net income (loss) is allocated between common stock and other participating securities based on their participation rights. Basic earnings per share is calculated by dividing income (loss) allocable to common stockholders (after the reduction for any preferred stock dividends assuming current income for the period had been distributed) by the weighted average number of shares of common stock outstanding, net of shares subject to repurchase by the Company, during the period. Diluted earnings per share is calculated by dividing the net income (loss) allocable to common stockholders by the weighted average number of common shares outstanding, adjusted for the effects of potentially dilutive common stock, which are comprised of stock options, warrants to purchase common stock and convertible preferred stock.

Segment Information

The Company’s operations are located primarily in the United States, and materially all tangible assets are located in Westlake Village, California. The Company operates in one segment related to the design, development and sale of high speed analog connectivity components that operate to maintain, amplify and improve signal integrity at high speeds in a wide variety of applications. The Company’s chief operating decision-maker is its Chief Executive Officer, who reviews operating results on an aggregate basis and manages the Company’s operations as a single operating segment.

Recent Accounting Pronouncements

In May 2011, Financial Accounting Standards Board (“FASB”) issued an amendment to its accounting guidance on fair value measurement. The amendments provide a consistent definition of fair value and ensure

 

71


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

that the fair value measurement and disclosure requirements are similar between United States GAAP and International Financial Reporting Standards. The amendments change certain fair value measurement principles and enhance the disclosure requirements about fair value measurements. This guidance is effective during interim and annual periods beginning after December 15, 2011 and are applied prospectively. The Company does not anticipate a material impact to the consolidated financial statements upon adoption of this guidance.

In June 2011, FASB issued an amendment to its accounting guidance on comprehensive income. The amendments require an entity to present the total of comprehensive income, the components of net income and the components of other comprehensive income either in a single continuous statement of comprehensive income or in two separate but consecutive statements. The amendments eliminate the option to present the components of other comprehensive income as part of the statement of equity. This guidance is effective for fiscal years, and interim periods within those years, beginning after December 15, 2011. This guidance will change how the Company presents other comprehensive income.

2. Acquisition

On June 30, 2010, the Company acquired all of the outstanding shares of WTI in exchange for $3,344 in cash and 313,713 shares of Series E preferred stock. WTI is primarily engaged in the research, design, development, manufacture and sale of Nand Flash Controller System-On-Chip, secure digital/multi-media card controller, and card reader products. As a result of the acquisition, the Company was expected to expand its technology and engineering resources.

The fair value of consideration transferred is shown in the table below:

 

Cash

   $ 3,344   

Series E preferred stock

     4,538   
  

 

 

 
   $ 7,882   
  

 

 

 

The Company issued 313,713 shares of Series E preferred stock that has a total fair value of $4,538 based on the valuation performed as of June 30, 2010, the acquisition date. The acquisition of WTI includes a contingent consideration arrangement that requires additional consideration to be paid by the Company based on achievement of certain revenue and gross margin targets of WTI over the three fiscal quarters starting July 1, 2010. The amount of contingent consideration, if any, was payable on or before May 15, 2011. The amount of consideration the Company could pay under the agreement ranges from $0 to $2,000. The fair value of the contingent consideration on the acquisition date and at December 31, 2010 was determined to be insignificant as the probability of WTI achieving the revenue and gross margin requirement is deemed to be remote. No contingent consideration was paid in 2011 as WTI did not achieve the revenue and gross margin requirement.

The acquisition has been accounted for using the acquisition method of accounting which requires, among other things, that assets acquired and liabilities assumed be recognized at their fair values as of the acquisition date.

 

72


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

The following table summarizes the purchase price allocation as of the acquisition date:

 

Cash

   $ 808   

Receivables

     174   

Inventories

     493   

Other current assets

     100   

Property and equipment

     68   

Identifiable intangible assets

     1,530   

In-process research and development

     110   

Other noncurrent assets

     34   

Accounts payable and accrued expenses

     (539

Deferred tax liabilities, net

     (177
  

 

 

 

Total identifiable net assets

     2,601   

Goodwill

     5,281   
  

 

 

 

Net assets acquired

   $ 7,882   
  

 

 

 

As of the acquisition date, the fair value of receivables, inventories, property and equipment, accounts payable and accrued expenses approximated the book value acquired.

Identifiable intangible assets consist of developed technology of $800 and customer relationships of $730. The Company used a relief-from-royalty method to value developed technology. The relief-from-royalty method estimates the cost savings that accrue to the owner of an intangible asset that would otherwise be payable as royalties or license fees on revenue earned through the use of the asset. The royalty rate used is based on an analysis of licensing agreements related to similar technologies. Revenue is projected over the expected remaining useful life of the developed technology. The market-derived royalty rate is then applied to estimate the royalty savings. Customer relationships represent future projected revenue that will be derived from sales of products to existing customers. Developed technology and customer relationships will be amortized on a straight-line method, which approximates the pattern of economic consumption over their estimated useful lives as follows:

Developed technology             4 years

Customer relationships             5 years

The Company capitalized $110 of IPR&D costs related to the WTI acquisition. Upon completion of the projects, the related IPR&D assets will be amortized over their estimated useful lives. If any of the projects are abandoned, the Company will be required to impair the related IPR&D asset. The fair value of the IPR&D was determined using the relief-from-royalty method similar to the process as discussed above. The significant assumptions underlying the valuation of IPR&D are:

 

Estimated percent complete

     7

Estimated time to complete

     6 months   

Estimated cost to complete

   $ 92   

Discount rate

     32.5

In the third quarter of 2011, the Company abandoned the in-process projects and wrote off the entire IPR&D.

 

73


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

Goodwill is calculated as the excess of the consideration transferred over the net assets recognized and is attributable to the workforce of the acquired business and the synergies expected to arise after the Company’s acquisition of WTI. Goodwill is not amortized and is not deductible for tax purposes. At the time of the acquisition, goodwill was assigned to the Company’s one reporting unit.

The Company incurred acquisition costs of $278 which are included in general and administrative expense in the consolidated statement of income for the year ended December 31, 2010.

WTI contributed revenue of $1,359 and pre-tax loss of $869 to the Company for the period from June 30 to December 31, 2010.

Pro Forma Information

The following unaudited pro forma financial information presents a summary of the Company’s consolidated results of operations for the year ended December 31, 2010 and the year ended December 31, 2009, assuming the WTI acquisition had been completed as of January 1, 2009:

 

     Pro Forma
Year Ended
December 31,
2010
     Pro Forma
Year Ended
December 31,
2009
 
     (unaudited)      (unaudited)  

Revenue

   $ 84,316       $ 60,427   

Net income

   $ 25,738       $ 5,838   

Net income allocable to common stockholders

   $ 5,186       $ —     

Earnings per share—basic

   $ 1.02       $ —     

Earnings per share—diluted

   $ 0.61       $ —     

The unaudited pro forma consolidated results were prepared using the acquisition method of accounting and are based on the historical financial information of the Company and WTI, reflecting the results of operations for the year ended December 31, 2010 and 2009. The unaudited pro forma consolidated results are not necessarily indicative of what our consolidated results of operations actually would have been had we completed the acquisition as of the beginning of each period presented. In addition, the unaudited pro forma consolidated results do not purport to project the future results of operations of the combined company nor do they reflect the expected realization of any cost savings associated with the acquisition.

3. Investments in Marketable Securities

The following table summarizes the investments by investment category as of December 31, 2011:

 

     Cost      Gross
Unrealized
Gains
     Gross
Unrealized
Losses
    Fair Value  

Available-for-sale securities:

          

US treasury securities

   $ 24,153       $ 4       $ (1   $ 24,156   

Municipal bonds

     40,080         195         (3     40,272   

Corporate notes/bonds

     20,150         12         (300     19,862   

Certificate of deposit

     1,000         —           (2     998   

Variable rate demand notes

     1,000         3         —          1,003   

Commercial papers

     994         1         —          995   

Asset backed securities

     2,000         —           (3     1,997   
  

 

 

    

 

 

    

 

 

   

 

 

 

Total investments

   $ 89,377       $ 215       $ (309   $ 89,283   
  

 

 

    

 

 

    

 

 

   

 

 

 

 

74


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

As of December 31, 2011, we had 24 investments that were in an unrealized loss position for less than 12 months. The gross unrealized losses on these investments at December 31, 2011 were due to changes in interest rates and determined to be temporary in nature. The Company reviews the investments to identify and evaluate investments that have an indication of possible other-than-temporary impairment. Factors considered in determining whether a loss is other-than-temporary include the length of time and extent to which fair value has been less than the cost basis, the financial condition and near-term prospects of the investee, and the intent and ability to hold the investment for a period of time sufficient to allow for any anticipated recovery in market value.

The contractual maturities of available-for-sale securities at December 31, 2011 are presented in the following table:

 

     Cost      Fair Value  

Due in one year or less

   $ 31,578       $ 31,576   

Due between one and five years

     57,799         57,707   
  

 

 

    

 

 

 
   $ 89,377       $ 89,283   
  

 

 

    

 

 

 

4. Concentrations

Financial instruments that subject the Company to concentrations of credit risk consist primarily of cash, cash equivalents and trade accounts receivable. The Company extends differing levels of credit to customers and does not require collateral deposits. As of December 31, 2011 and 2010, the Company maintained an allowance for doubtful accounts of $68.

The following table summarizes the significant customers’ and distributors’ revenue and accounts receivable as a percentage of total revenue and total accounts receivable, respectively:

 

     Year Ended December 31,  
     2011     2010     2009  

Revenue

      

Customer A

     27     34     36

Customer B

     14        *        *   

Customer C

     *        *        *   

 

     December 31,  
     2011     2010  

Accounts Receivable

    

Customer A

     33     33

Customer B

     10        11   

Customer C

     10        *   

 

* Less than 10% of total revenue and accounts receivable

Customer C and another customer are distributors that sell the Company’s products exclusively to an end customer. In the aggregate, revenue to such end customer, including revenue made through distributors as a percentage of total revenue was 11%, 11% and 17% for the years ended December 31, 2011, 2010 and 2009.

 

75


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

5. Inventories

Inventories consist of the following:

 

     December 31,  
     2011      2010  

Raw materials

   $ 1,261       $ 1,028   

Work in process

     1,910         2,033   

Finished goods

     2,545         2,034   
  

 

 

    

 

 

 
   $ 5,716       $ 5,095   
  

 

 

    

 

 

 

Finished goods held by distributors were $473 and $482 as of December 31, 2011 and 2010, respectively.

6. Property and Equipment, net

Property and equipment consist of the following:

 

     December 31,  
     2011     2010  

Laboratory and production equipment

   $ 15,643      $ 11,882   

Office, software and computer equipment

     4,277        3,655   

Furniture and fixtures

     614        729   

Leasehold improvements

     3,118        2,652   
  

 

 

   

 

 

 
     23,652        18,918   
    

Less accumulated depreciation

     (14,086     (11,712
  

 

 

   

 

 

 
   $ 9,566      $ 7,206   
  

 

 

   

 

 

 

Depreciation and amortization expense for the years ended December 31, 2011, 2010 and 2009 was $2,962, $1,640 and $1,291, respectively.

As of December 31, 2011 and 2010, laboratory and production equipment includes $397 in assets that have been capitalized under capital leases. Accumulated amortization of equipment under capital leases was $397 and $388 as of December 31, 2011 and 2010, respectively. Amortization expense in connection with equipment purchased under capital leases was $9, $45 and $70 for the years ended December 31, 2011, 2010 and 2009, respectively.

As of December 31, 2011 and 2010, computer software costs included in property and equipment were $1,712 and $1,471, respectively. Amortization expense of capitalized computer software costs was $235, $184 and $134 for the years ended December 31, 2011, 2010 and 2009, respectively.

7. Goodwill and Identifiable Intangible Assets

The change in goodwill from December 31, 2010 of $5,847 to December 31, 2011 of $5,875 was due to foreign currency translation.

 

76


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

The following table presents details of identifiable intangible assets at December 31, 2010:

 

     Gross      Accumulated
Amortization
     Net  

Developed technology

   $ 886       $ 111       $ 775   

Customer relationships

     808         81         727   

In-process research and development

     122         —           122   
  

 

 

    

 

 

    

 

 

 
   $ 1,816       $ 192       $ 1,624   
  

 

 

    

 

 

    

 

 

 

During the third quarter of 2011, the Company decided to discontinue the sale of acquired legacy products in Taiwan and as a result, evaluated the carrying value of long-lived assets of the related asset group, which resulted in impairment of all identifiable intangible assets. The impairment losses were presented in the statements of operations for the year ended December 31, 2011 as follows:

 

Cost of revenue

   $ 654   

Research and development

     122   

Sales and marketing

     632   
  

 

 

 
   $ 1,408   
  

 

 

 

Amortization expense for amortizing intangible assets was $224 and $192 for the years ended December 31, 2011 and 2010, respectively.

8. Other Long-term Liabilities

Other long-term liabilities consist of the following:

 

     December 31,  
     2011      2010  

Deferred rent

   $ 1,988       $ 1,561   

Income tax payable

     1,546         1,000   

Other

     —           33   
  

 

 

    

 

 

 
   $ 3,534       $ 2,594   
  

 

 

    

 

 

 

9. Income Taxes

Income before income taxes consists of the following:

 

     Year Ended December 31,  
     2011     2010     2009  

United States

   $ 2,395      $ 12,765      $ 8,158   

Foreign

     (1,682     (876     —     
  

 

 

   

 

 

   

 

 

 

Total

   $ 713      $ 11,889      $ 8,158   
  

 

 

   

 

 

   

 

 

 

 

77


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

Income tax expense (benefit) consisted of the following:

 

     Year Ended December 31,  
     2011     2010     2009  

Current:

      

U.S. Federal

   $ 2,811      $ (6,158   $ 253   

U.S. State

     1,180        (1,015     576   

Foreign

     (17     29        —     
  

 

 

   

 

 

   

 

 

 
     3,974        (7,144     829   
  

 

 

   

 

 

   

 

 

 

Deferred:

      

U.S. Federal

     (2,396     (4,523     —     

U.S. State

     (2,742     (2,427     —     

Foreign

     (54     (148     —     
  

 

 

   

 

 

   

 

 

 
     (5,192     (7,098     —     
  

 

 

   

 

 

   

 

 

 

Total

   $ (1,218   $ (14,242   $ 829   
  

 

 

   

 

 

   

 

 

 

Income tax expense (benefit) differed from the amounts computed by applying the U.S. federal income tax rate of 35% to pretax income as a result of the following:

 

     Year Ended December 31,  
     2011     2010     2009  

Provision (benefit) at statutory rate

   $ 249      $ 4,161      $ 2,855   

State income taxes

     217        1,653        375   

Research and development credits

     (2,672     (2,063     (713

Change in valuation allowance

     433        (24,022     (1,964

Foreign earnings, taxed at different rates

     670        4,912        —     

Unrecognized tax benefits

     1,153        791        —     

Stock-based compensation

     95        391        —     

Tax exempt income

     (135     —          —     

Prior year return to provision adjustment

     (1,244     —          —     

Other

     16        (65     276   
  

 

 

   

 

 

   

 

 

 
   $ (1,218   $ (14,242   $ 829   
  

 

 

   

 

 

   

 

 

 

 

78


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

Significant components of the Company’s net deferred taxes consist of the following:

 

     December 31,  
     2011     2010  

Deferred tax assets

    

Net operating loss carry forwards

   $ 7,338      $ 8,051   

Research and development credits

     7,220        3,788   

Stock-based compensation

     2,882        1,150   

Other temporary differences

     1,536        1,666   
  

 

 

   

 

 

 

Total deferred tax assets

     18,976        14,655   
  

 

 

   

 

 

 

Deferred tax liabilities

    

Subpart F income on foreign subsidiaries earnings

     (5,182     (5,635

Amortization and depreciation

     (1,225     (953

Other

     —          (249
  

 

 

   

 

 

 

Total deferred tax liabilities

     (6,407     (6,837
  

 

 

   

 

 

 

Less: valuation allowance

     (433     —     
  

 

 

   

 

 

 

Deferred tax assets, net

   $ 12,136      $ 7,818   
  

 

 

   

 

 

 

At December 31, 2011 and 2010, the Company has recorded a deferred tax charge of $6,101 and $7,293, respectively, which represents the tax on the intercompany transfer of intangible assets in connection with the Company’s international reorganization during 2010 in accordance with ASC 740-10-25-3. The deferred tax charge is being amortized over the estimated useful life of 8 years to income tax expense.

Valuation Allowance

Based on the current trend of operating results and Company forecasts, the Company believes that it is more likely than not that it will recognize the benefit of its deferred tax assets and no valuation allowance is required as of December 31, 2011 and 2010, except for the deferred tax assets of its Taiwan subsidiary for which a full valuation allowance of $433 was provided at December 31, 2011.

The Company recorded a full valuation allowance against its net deferred tax assets at December 31, 2009. In determining the need for a valuation allowance, management reviews all available evidence pursuant to the requirements of ASC 740. The determination of recording or releasing tax valuation allowances is made, in part, pursuant to an assessment performed by management regarding the likelihood that the Company will generate sufficient future taxable income against which benefits of the deferred tax assets may or may not be realized. This assessment requires management to exercise significant judgment and make estimates with respect to the Company’s ability to generate revenue, gross profits, operating income and taxable income in future periods. Amongst other factors, management must make assumptions regarding overall current and projected business and semiconductor industry conditions, operating efficiencies, the Company’s ability to timely develop, introduce and consistently manufacture new products to customers’ specifications, acceptance of new products, customer concentrations, technological change and the competitive environment which may impact the Company’s ability to generate taxable income and, in turn, realize the value of the deferred tax assets. Significant cumulative operating losses in 2008 and prior years, uncertainty with respect to the acceptance of the Company’s products by end customers and significant economic uncertainties in the market made the Company’s ability to project future taxable income highly uncertain and volatile at December 31, 2009. Although 2009 was the Company’s first profitable year, only the last three quarters of the year were profitable and the vast majority of

 

79


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

the Company’s pre-tax income was generated in the last two quarters of the year. Based upon management’s assessment of all available evidence, including a relatively short period of recent profitability, coupled with significant uncertainties associated with the Company’s 2010 business outlook, the Company concluded as of December 31, 2009, that it was not more likely than not that its net deferred tax assets would be realized.

In March 2010, the Company received its first substantial quantity of production orders for a new low voltage product, which was a new low voltage version of the Company’s integrated PLL and register buffer. This new low voltage product is currently in commercial production and is shipping in volume. The arrival of these production orders from one of the Company’s largest customers reduced concerns and increased confidence in the strength of the Company’s business outlook for the balance of 2010. In addition, certain other new product introductions began to gain traction with customers, providing additional confidence in the Company’s longer term outlook. The Company also achieved further clarity around certain contingencies related to ongoing litigation and certain other product acceptance concerns that existed at December 31, 2009. Furthermore, during the first quarter of 2010 the Company unexpectedly received additional orders for an older product that allowed the Company to exceed its overall plan for the quarter and continue the recent trend of profitability into the first quarter of 2010. At its April 30, 2010 meeting, based on a review of the positive developments that materialized in the first quarter of 2010, the Company’s Board of Directors decided to authorize management to retain investment bankers and proceed with plans to pursue a potential initial public offering. Based on these positive developments and an additional quarter of profitable operation, management reassessed the need for a valuation allowance at March 31, 2010 and concluded that a change in circumstances had occurred. Management determined that, based on the Company’s prospects and business outlook, it was reasonable to conclude that it is more likely than not that the Company’s deferred tax assets will be realized. Accordingly, the Company released the full valuation allowance recorded against its deferred tax assets $24,022 based on the weight of positive evidence that existed at March 31, 2010. Significant judgment is required to determine the timing and extent of a valuation allowance release and the Company’s ability to utilize deferred tax assets will continue to be dependent on the ability to generate sufficient taxable income in future periods.

The valuation allowance increased $433 in the year ended December 31, 2011 for the Taiwan subsidiary, and decreased $24,022 for the year ended December 31, 2010.

General Income Tax Disclosures

The Company has net operating loss (“NOL”) carryforwards for federal and state income tax purposes of approximately $12,936 and $41,542, respectively at December 31, 2011 that will begin to expire in 2022 for federal income tax purposes and in 2016 for state income tax purposes. The Company has additional federal and state NOL carryover of $21,645 and $11,237, respectively, arising from an excess stock option deduction for 2011 that was not recognized in the financial statements. These excess stock option compensation benefits will be credited to additional paid-in capital when it reduces current income tax liability. At December 31, 2011, the Company has NOL carryforwards of $2,338 for its Taiwan subsidiary which begin to expire in 2019, and $522 for the Singapore subsidiary, which do not expire. A full valuation allowance has been provided on NOL carryforwards for the Taiwan subsidiary.

At December 31, 2011, the Company also has federal and state research and development (“R&D”) tax credit carryforwards of $5,235 and $5,829, respectively. The federal tax credits will begin to expire in 2026, unless previously utilized. The state tax credits do not expire.

Pursuant to Internal Revenue Code sections 382 and 383, use of the Company’s NOL and R&D credits generated prior to June 2004 are subject to an annual limitation due to a cumulative ownership percentage change

 

80


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

that occurred in that period. The Company has had two changes in ownership, one in December 2000 and the second in June 2004, that resulted in an annual limitation on NOL and R&D credit utilization. The NOL and R&D credit carryforward which will expire unused due to annual limitation is not recognized for financial statement purposes and is not reflected in the above carryover amounts.

The Company recorded a benefit of $1,244 to its 2011 income tax provision for a prior year return to provision adjustment, which primarily relates to California state income taxes. The Company files an income tax return in California the laws of which generally require the results of all affiliated companies, both domestic and foreign, that are engaged in a unitary business to be included in the California return (i.e., worldwide combined reporting basis). However, California law also provides that a California company may make a so-called “Water’s Edge” election which limits the results included in the combined reporting to only the companies that are subject to tax in the United States. Once a California Water’s Edge election is made with a timely filed California tax return, the filing Company is required to file using the Water’s Edge for seven years. 2010 was the first year the Company was subject to the California worldwide combined reporting method. As of December 31, 2010, the Company intended to make the Water’s Edge election with the 2010 California income tax return and recorded its 2010 state income tax expense based upon this method. However, in October 2011, the Company filed its 2010 California tax return on a worldwide combined reporting basis rather than making the Water’s Edge election. The Company’s decision to file its 2010 California income tax return on a worldwide combined reporting basis was a result of information and circumstances arising in 2011 surrounding expectations of future taxable income under each filing election.

The Company operates under tax holiday in Singapore, which is effective through May 2020. The tax holiday is conditional upon meeting certain employment, activities and investment thresholds. The impact of the Singapore tax holiday decreased Singapore taxes by $95 for 2011 and was not material for 2010.

The following table summarizes the changes in gross unrecognized tax benefits:

 

     Year Ended December 31,  
     2011     2010      2009  

Balance as of January 1

   $ 2,985      $ 1,283       $ 1,057   

Increases based on tax positions related to the current year

     1,239        1,438         226   

Decreases based on tax positions of prior year

     (92     264         —     
  

 

 

   

 

 

    

 

 

 

Balance as of December 31

   $ 4,132      $ 2,985       $ 1,283   
  

 

 

   

 

 

    

 

 

 

As of December 31, 2011, the Company had approximately $4,132 of unrecognized tax benefits, $3,350 of which, if recognized, would affect the effective income tax rate. The Company does not expect any significant increases or decreases to its unrecognized tax benefits within the next 12 months.

The Company recognizes interest and penalties related to unrecognized tax benefits as a component of income tax expense. The Company recognized no interest or penalties during the years ended December 31, 2011, 2010 and 2009 as the prior year’s unrecognized tax benefits reduce tax attributes that have not yet been utilized on the Company’s tax return.

The Company files income tax returns in the U.S. federal jurisdiction, state of California and certain foreign jurisdictions. The Company is no longer subject to U.S. federal income tax examinations for tax years ended on or before December 31, 2007 or to California state income tax examinations for tax years ended on or before December 31, 2006. However, to the extent allowed by law, the tax authorities may have the right to examine prior periods where net operating losses or tax credits were generated and carried forward, and make adjustments up to the amount of the net operating loss or credit carryforward.

 

81


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

The Company does not provide for U.S. income taxes on undistributed earnings of its controlled foreign corporations that are intended to be invested indefinitely outside the United States. At December 31, 2011, the Company’s foreign subsidiaries had an accumulated deficit. However, no U.S. deferred tax asset was recorded for the accumulated deficit as it was not apparent as of December 31, 2011, that such deferred tax asset would reverse in the foreseeable future.

10. Earnings Per Share

The following shows the computation of basic and diluted earnings per share:

 

     Year Ended December 31,  
     2011     2010     2009  

Numerator

      

Net income

   $ 1,931      $ 26,131      $ 7,329   

Less amount allocable to preferred stockholders

     —          (20,805     (7,193

Less amount allocable to unvested early exercised options and unvested restricted stock award

     (1     (86     (6
  

 

 

   

 

 

   

 

 

 

Net income allocable to common stockholders—basic and diluted

   $ 1,930      $ 5,240      $ 130   
  

 

 

   

 

 

   

 

 

 

Denominator

      

Weighted average common stock

     26,820,662        5,137,029        1,671,565   

Less weighted average unvested common stock subject to repurchase and unvested restricted stock award

     (21,425     (50,860     (2,689
  

 

 

   

 

 

   

 

 

 

Weighted average common stock—basic

     26,799,237        5,086,169        1,668,876   

Effect of potentially dilutive securities:

      

Add options to purchase common stock

     2,547,945        3,425,528        1,103,828   

Add unvested restricted stock unit

     9,442        —          —     

Add warrants to purchase common stock

     10,799        34,840        12,573   
  

 

 

   

 

 

   

 

 

 

Weighted-average common stock—diluted

     29,367,423        8,546,537        2,785,277   
  

 

 

   

 

 

   

 

 

 

Earnings per share

      

Basic

   $ 0.07      $ 1.03      $ 0.08   
  

 

 

   

 

 

   

 

 

 

Diluted

   $ 0.07      $ 0.61      $ 0.05   
  

 

 

   

 

 

   

 

 

 

Net income has been allocated to the common stock, convertible participating preferred stock before conversion to common stock, unvested early exercised options and unvested restricted stock award based on their respective rights to share in dividends.

 

82


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

The following securities were not included in the computation of diluted earnings per share as inclusion would have been anti-dilutive:

 

     Year Ended December 31,  
     2011      2010      2009  

Convertible preferred stock

     —           12,776,077         14,481,699   

Common stock options

     965,266         938,691         2,145,688   

Warrant to purchase redeemable convertible preferred stock

     —           —           17,187   

Unvested early exercised options

     —           32,872         2,689   

Unvested restricted stock award and restricted stock unit

     410,981         17,987         —     
  

 

 

    

 

 

    

 

 

 
     1,376,247         13,765,627         16,647,263   
  

 

 

    

 

 

    

 

 

 

11. Warrants

In connection with various financing agreements, the Company issued warrants to purchase common stock and preferred stock. In November 2010, upon completion of the initial public offering, all preferred stock warrants were converted to common stock warrants. As of December 31, 2010, there were 2,142 and 38,571 outstanding common stock warrants with exercise prices of $3.42 and $1.54 per share, respectively. As of December 31, 2011, there were 2,142 outstanding common stock warrants with an exercise price of $3.42.

12. Stock Based Compensation

In 2000, the Company adopted the 2000 Stock Option/Stock Issuance Plan (the “2000 Plan”). Under the provisions of the 2000 Plan, employees, outside directors, consultants and other independent advisors who provide services to the Company may be issued incentive and non-qualified stock options to purchase common stock or may be issued shares of common stock directly. The Board of Directors is authorized to administer the 2000 Plan and establish the stock option terms, including the exercise price and vesting period. Options granted under the plan may have varying vesting schedules; however, options generally vest 25% upon completion of one year of service and thereafter in 36 equal monthly installments. Options granted are immediately exercisable and the shares issued upon exercise of the option are subject to a repurchase right held by the Company. The repurchase price under the repurchase right is the original exercise price and the right lapses in accordance with the option-vesting schedule. As of December 31, 2011, there were no unvested shares outstanding subject to the Company’s right of repurchase. There were 32,875 unvested shares subject to the Company’s repurchase right as of December 31, 2010. The proceeds received from the unvested early exercise of options are presented in the balance sheet as liabilities and subsequently classified to equity based on the vesting schedule. The vesting of certain options granted or shares issued under the 2000 Plan is subject to acceleration of vesting upon the occurrence of certain events as defined in the 2000 Plan.

Under the 2000 Plan, the exercise price, in the case of an incentive stock option, can-not be less than 100%, and in the case of a nonqualified stock option, not less than 85%, of the fair market value of such shares on the date of grant. The term of the option is determined by the Board but in no case can exceed 10 years.

In June 2010, the Board of Directors approved the Company’s 2010 Stock Incentive Plan (the “2010 Plan”), which became effective in November 2010. Upon completion of the Company’s initial public offering, shares originally reserved for issuance under the 2000 Plan but which were not issued or subject to outstanding grants

 

83


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

on the effective date of the 2010 Plan, and shares subject to outstanding options or forfeiture restriction under the 2000 Plan on the effective date of the 2010 Plan that are subsequently forfeited or terminated before being exercised, become available for awards under the 2010 Plan, up to 428,571 shares. The 2010 Plan provides for the grants of restricted stock, stock appreciation rights and stock unit awards to employees, non-employee directors, advisors and consultants. The Board of Directors administers the 2010 Plan, including the determination of the recipient of an award, the number of shares subject to each award, whether an option is to be classified as an incentive stock option or nonstatutory option, and the terms and conditions of each award, including the exercise and purchase prices and the vesting or duration of the award. Options granted under the 2010 Plan are exercisable only upon vesting. At December 31, 2011, 2,319,832 shares of common stock have been reserved for future grants under the 2010 Plan.

Stock Option Awards

The fair value of each option grant is estimated on the date of grant using the Black-Scholes option pricing model with the following weighted average assumptions:

 

     Year Ended December 31,  
     2011     2010     2009  

Risk-free interest rate

     2.66     2.99     2.67

Expected life (in years)

     6.41        6.42        6.25   

Dividend yield

     —          —          —     

Expected volatility

     50     60     68

The following table summarizes information regarding options outstanding:

 

     Number of
Shares
    Weighted
Average
Exercise
Price Per
Share
     Weighted
Average
Remaining
Contractual
Life
     Aggregate
Intrinsic
Value
 

Outstanding at December 31, 2010

     6,672,249        3.85         6.88       $ 108,369   
       

 

 

    

 

 

 

Granted

     774,465        20.23         

Exercised

     (2,640,853     1.71         

Canceled

     (546,755     9.00         
  

 

 

   

 

 

       

Outstanding at December 31, 2011

     4,259,106      $ 7.50         7.21       $ 25,168   
  

 

 

   

 

 

    

 

 

    

 

 

 

Exercisable at December 31, 2011

     3,528,641      $ 4.91         6.77       $ 25,042   
  

 

 

   

 

 

    

 

 

    

 

 

 

Vested at December 31, 2011

     2,160,070      $ 3.24         5.96       $ 18,897   
  

 

 

   

 

 

    

 

 

    

 

 

 

Vested and expected to vest at December 31, 2011

     4,202,984      $ 7.40         7.19       $ 25,085   
  

 

 

   

 

 

    

 

 

    

 

 

 

The intrinsic value of options outstanding, exercisable and vested and expected to vest is calculated based on the difference between the exercise price and the fair value of the Company’s common stock as of the respective balance sheet dates.

The total fair value of employee options vested during the years ended December 31, 2011 and 2010 was $3,101 and $887, respectively.

 

84


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

The weighted average grant date fair value per share of stock options granted to employees during the year ended December 31, 2011 and 2010 was $10.54 and $5.79, respectively.

The total intrinsic value of options exercised during the years ended December 31, 2011 and 2010 was $45,613 and $3,247, respectively. The intrinsic value of exercised options is calculated based on the difference between the exercise price and the fair value of the Company’s common stock as of the exercise date. Cash received from the exercise of stock options was $4,505 and $485, respectively, for the years ended December 31, 2011 and 2010.

Restricted Stock Units and Awards

The Company granted restricted stock units and awards to members of the Board of Directors and employees. Most of the Company’s outstanding restricted stock units vest over four years with vesting contingent upon continuous service. The Company estimates the fair value of restricted stock units and awards using the market price of the common stock on the date of the grant. The fair value of these awards is amortized on a straight-line basis over the vesting period.

The following table summarizes information regarding outstanding restricted stock units:

 

     Number of
Shares
    Weighted
Average
Grant Date
Fair Value
Per Share
 

Outstanding at December 31, 2010

     —        $ —     

Granted

     776,056        20.66   

Vested

     (12,500     22.07   

Canceled

     (37,000     21.75   
  

 

 

   

 

 

 

Outstanding at December 31, 2011

     726,556        20.58   
  

 

 

   

 

 

 

Expected to vest at December 31, 2011

     691,210     
  

 

 

   

As of December 31, 2010, the Company had 35,355 outstanding nonvested restricted stock awards, 13,930 of which vested during the year ended December 31, 2011 resulting to 21,425 nonvested restricted stock awards outstanding as of December 31, 2011.

Stock-Based Compensation Expense

Stock-based compensation expense is included in the Company’s results of operations as follows:

 

     Year Ended December 31,  
     2011      2010      2009  

Cost of revenue

   $ 315       $ 107       $ 31   

Research and development

     3,214         1,381         475   

Sales and marketing

     2,054         526         238   

General and administrative

     1,609         691         421   
  

 

 

    

 

 

    

 

 

 
   $ 7,192       $ 2,705       $ 1,165   
  

 

 

    

 

 

    

 

 

 

 

85


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

As of December 31, 2011, total unrecognized compensation cost related to unvested stock options and awards at December 31, 2011, prior to the consideration of expected forfeitures, was approximately $23,627, which is expected to be recognized over a weighted-average period of 3.03 years.

Employee Stock Purchase Plan

In December 2011, the Company adopted the Employee Stock Purchase Plan (“ESPP”). Participants purchase the Company’s stock using payroll deductions, which may not exceed 15% of their total cash compensation. Pursuant to the terms of the ESPP, the “look-back” period for the stock purchase price is six months. Offering and purchase periods will begin on February 10 and August 10 of each year. Participants will be granted the right to purchase common stock at a price per share that is 85% of the lesser of the fair market value of the Company’s common shares at the beginning or the end of each six-month period.

The ESPP imposes certain limitations upon an employee’s right to acquire common stock, including the following: (i) no employee shall be granted a right to participate if such employee immediately after the election to purchase common stock, would own stock possessing 5% or more to the total combined voting power or value of all classes of stock of the Company, and (ii) no employee may be granted rights to purchase more than $25 fair value of common stock for each calendar year. The maximum aggregate number of shares of common stock available for purchase under the ESPP is one million shares. There was no common stock issued under the ESPP in 2011 as the first offering period under the ESPP commence in February 2012.

13. Employee Benefit Plan

The Company has established a 401(k) tax-deferred savings plan (the “Plan”) which permits participants to make contributions by salary deduction pursuant to Section 401(k) of the Internal Revenue Code of 1986, as amended. The Company may, at its discretion, make matching contributions to the Plan. Furthermore, the Company is responsible for administrative costs of the Plan. The Company has not made contributions to the Plan since its inception.

14. Fair Value Measurements

The guidance on fair value measurements requires fair value measurements to be classified and disclosed in one of the following three categories:

Level 1: Unadjusted quoted prices in active markets that are accessible at the measurement date for identical, unrestricted assets or liabilities;

Level 2: Quoted prices in markets that are not active, or inputs which are observable, either directly or indirectly, for substantially the full term of the asset or liability, or

Level 3: Prices or valuation techniques that require inputs that are both significant to the fair value measurement and unobservable (i.e., supported by little or no market activity).

The Company measures its investments in marketable securities at fair value using the market approach which uses prices and other relevant information generated by market transactions involving identical or comparable assets or liabilities. The Company has cash equivalents which consist of money market funds valued using the amortized cost method, in accordance with Rule 2a-7 under the 1940 Act which approximates fair value.

 

86


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

The following table presents information about assets and liabilities required to be carried at fair value on a recurring basis as of December 31, 2011:

 

     Total      Level 1      Level 2  

Assets

        

Cash equivalents:

        

Money market funds

   $ 12,640       $ —         $ 12,640   

Investment in marketable securities:

        

US treasury securities

     24,156         24,156         —     

Municipal bonds

     40,272         —           40,272   

Corporate notes/bonds

     19,862         —           19,862   

Certificate of deposit

     998         —           998   

Variable rate demand notes

     1,003         —           1,003   

Commercial papers

     995         —           995   

Asset backed securities

     1,997         —           1,997   
  

 

 

    

 

 

    

 

 

 
   $ 101,923       $ 24,156       $ 77,767   
  

 

 

    

 

 

    

 

 

 

As of December 31, 2010, cash equivalents of $80,017, consist mainly of money market funds which are valued using the amortized cost method, in accordance with Rule 2a-7 under the 1940 Act which approximates fair value. Cash equivalents as of December 31, 2010 are categorized as Level 2.

15. Segment and Geographic Information

The Company operates in one reportable segment. The Company’s Chief Executive Officer, who is considered to be the chief operating decision maker, manages the Company’s operations as a whole and reviews consolidated financial information for purposes of evaluating financial performance and allocating resources. Revenue by region is classified based on the locations to which the product is transported, which may differ from the customer’s principal offices.

The following table sets forth the Company’s revenue by geographic region:

 

     Year Ended December 31,  
     2011      2010      2009  

Korea

   $ 14,421       $ 14,319       $ 18,307   

United States

     16,791         13,528         10,727   

China

     23,378         29,238         9,924   

Other

     24,707         26,108         19,894   
  

 

 

    

 

 

    

 

 

 
   $ 79,297       $ 83,193       $ 58,852   
  

 

 

    

 

 

    

 

 

 

As of December 31, 2011, $2,837 of long-lived tangible assets are located outside the United States of which $2,374 are located in Taiwan. As of December 31, 2010, $1,280 of long-lived tangible assets are located outside the United States of which $864 are located in Taiwan.

16. Commitments and Contingencies

Leases

The Company leases its facility and certain equipment under noncancelable lease agreements expiring in various years through 2016. The Company also licenses certain software used in its research and development activities under a term license subscription and maintenance arrangement.

 

87


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

Future minimum lease payments under noncancelable operating leases having initial terms in excess of one year are as follows:

 

     December 31, 2011  

2012

   $ 3,718   

2013

     3,918   

2014

     1,792   

2015

     1,038   

2016

     768   
  

 

 

 
   $ 11,234   
  

 

 

 

For the years ended December 31, 2011, 2010 and 2009, lease operating expense was $3,445, $3,272 and $2,811, respectively.

Noncancelable Purchase Obligations

The Company’s noncancelable purchase obligations consisted primarily of license and consulting fees the Company committed to pay under several agreements. As of December 31, 2011, the Company’s future noncancelable purchase obligations are as follows:

 

     December 31, 2011  

2012

   $ 750   
  

 

 

 

Legal Proceedings

Netlist, Inc. v. Inphi Corporation, Case No. 09-cv-6900 (C.D. Cal.)

On September 22, 2009, Netlist filed suit in the United States District Court, Central District of California, or the Court, asserting that the Company infringes U.S. Patent No. 7,532,537. Netlist filed an amended complaint on December 22, 2009, further asserting that the Company infringes U.S. Patent Nos. 7,619,912 and 7,636,274, collectively with U.S. Patent No. 7,532,537, the patents-in-suit, and seeking both unspecified monetary damages to be determined and an injunction to prevent further infringement. These infringement claims allege that the Company’s iMB™ and certain other memory module components infringe the patents-in-suit. The Company answered the amended complaint on February 11, 2010 and asserted that the Company does not infringe the patents-in-suit and that the patents-in-suit are invalid. In 2010, Company filed inter partes requests for reexamination with the United States Patent and Trademark Office (the “USPTO”), asserting that the patents-in-suit are invalid.

On August 27, 2010, the USPTO ordered the request for Inter Partes Reexamination for U.S. Patent No. 7,636,274 and found a substantial new question of patentability based upon each of the different issues that the Company raised as the reexamination requestor. On September 27, 2011, the Patent Office issued a First Office Action based on the Netlist ‘274 Patent Reexamination Request and rejected 91 of its 97 claims. On October 27, 2011, Netlist responded to the USPTO determination by amending some but not all of the claims, adding new claims and making arguments as to the validity of the rejected claims in view of the cited references. The Company provided rebuttable comments to the USPTO on November 28, 2011. The proceeding is expected to continue in accordance with established Inter Partes Reexamination procedures, with a further communication from the USPTO expected as the next substantive step.

 

88


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

On September 8, 2010, the USPTO ordered the request for Inter Partes Reexamination for U.S. Patent No. 7,532,537 and found a substantial new question of patentability based upon different issues that the Company raised as the reexamination requestor. The USPTO accompanied this Reexamination Order of U.S. Patent No. 7,532,537 with its own evaluation of the validity of this patent, and rejected some but not all of claims. In a response dated October 8, 2010, Netlist responded to the USPTO determination by amending some but not all of the claims, adding new claims and making arguments as to why the claims were not invalid in view of the cited references. The Company provided rebuttable comments to the USPTO on November 8, 2010 along with a Petition requesting an increase in the number of allowed pages of the rebuttable comments. On January 20, 2011, the USPTO granted the Petition in part. The Company then filed updated rebuttal comments on January 27, 2011 in compliance with the granted Petition. The USPTO has considered these updated rebuttal comments, and in a communication dated June 15, 2011, continued to reject all the previously rejected claims. The USPTO also rejected all the claims newly added in the October 8, 2010 Netlist response. In a further communication dated June 21, 2011, the USPTO issued an Action Closing Prosecution indicating that it would confirm the patentability of four claims and reject all the other pending claims. On August 22, 2011, Netlist responded to the Action Closing Prosecution by further amending some claims and making arguments as to the validity of the rejected claims in view of the cited references. The Company submitted rebuttal comments on September 21, 2011. In a further communication dated February 7, 2012, the USPTO issued a Right of Appeal Notice, which also indicated that the previous amendments to claim made by Netlist would be entered, and that the current pending claims, as amended, were patentable. The proceeding is expected to continue in accordance with established Inter Partes Reexamination procedures, with the parties being able to file a notice of appeal as the next substantive step.

On September 8, 2010, the USPTO ordered the request for Inter Partes Reexamination for U.S. Patent No. 7,619,912 and found a substantial new question of patentability based upon different issues that the Company raised as the reexamination requestor. The USPTO accompanied this Reexamination Order of U.S. Patent No. 7,619,912 with its own evaluation of the validity of this patent, and initially determined that all of the claims were patentable based upon the Company’s request for Inter Partes Reexamination. Netlist did not comment upon this Reexamination Order. The USPTO on February 28, 2011 also merged the Proceedings of the Company’s Reexamination of U.S. Patent No. 7,619,912, bearing Control No. 90/001,339 with Inter Partes Reexamination Proceeding 95/000,578 filed October 20, 2010 on behalf of SMART Modular Technologies, Inc. and Inter Partes Reexamination Proceeding 95/000,579 filed October 21, 2010 on behalf of Google, Inc. In each of these other Reexamination Proceedings, the USPTO had indicated that there existed a substantial new question of patentability with respect to certain claims of U.S. Patent No. 7,619,912, but had not accompanied the Reexamination Orders related thereto with its own evaluation of the validity of this patent, indicating that such evaluation would be forthcoming at a later time. This further evaluation was received in an Office Action dated April 4, 2011, in which the Examiner rejected a substantial majority of the claims based upon a number of different rejections, including certain of the rejections originally proposed by the Company in its Request for Reexamination. This Office Action also indicated that one claim was deemed to be patentable over the prior art of record in the merged Reexamination Proceedings. After seeking and obtaining an extension of time to respond to the Office Action dated April 4, 2011, Netlist served its response on July 5, 2011, which added new claims and made arguments as to why the originally filed claims were not invalid in view of the cited references. Each of the merged Reexamination Requestors, including the Company, submitted rebuttal comments by August 29, 2011. The USPTO considered this Netlist response and each of the rebuttal comments, and in an Office Action dated October 14, 2011, continued to reject most, but not all of the previously rejected claims, as well as rejected claims that had been added by Netlist in its July 5, 2011 response. After seeking and obtaining an extension of time to respond to the Office Action dated October 14, 2011, Netlist served its response on January 13, 2012, which response made amendments based upon subject matter that had been indicated as allowable in the Office Action dated October 14, 2011, added other new claims and made arguments as to why all of these claims should

 

89


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

be allowed. Two of the three merged Reexamination Requestors, including the Company, submitted rebuttal comments on February 13, 2012. The merged Reexamination Proceeding will be conducted in accordance with established procedures for merged Reexamination Proceedings, with the last of the merged Reexamination Requestors submitting its rebuttal comments, and then a further communication from the USPTO expected as the next substantive steps.

The reexamination proceedings could result in a determination that the patents-in-suit, in whole or in part, are valid or invalid, as well as modifications of the scope of the patents-in-suit.

A third party, Sanmina-SCI Corporation, or SSC, has also requested interference proceedings with the USPTO with respect to each of the patents-in-suit. In its April 21, 2010 Request for Continued Examination of U.S. Application No. 11/142,989 (“SSC ‘989 patent application”), SSC asserted that it has priority to the inventions claimed by the patents-in-suit and should be granted rights to those inventions. The Company has entered into an agreement with SSC for a non-exclusive license to those rights, if any, that SSC may obtain to the inventions claimed by the patents-in-suit if the USPTO agrees to commence interference proceedings and if SSC prevails in those proceedings.

The USPTO, in a communication dated July 7, 2010, acknowledged that claims were submitted in a filing made in the SSC ‘989 patent application to invoke an Interference with each of the patents-in-suit, but has declined to declare an Interference at this time. The July 7, 2010 USPTO communication rejected the claims submitted to invoke the Interference based upon 35 USC 112, with the rejection asserting that these claims contain “subject matter which was not described in the specification in such a way as to reasonably convey to one skilled in the relevant art that the inventor(s), at the time the application was filed, had possession of the claimed invention.” SSC responded to this USPTO communication on December 24, 2010 and provided an updated response on March 23, 2011 to comply with formalities noted by the USPTO. The USPTO, in a communication dated June 8, 2011, continued to reject the claims submitted to invoke the interference based upon the previously made rejections. SSC responded to this USPTO communication on December 8, 2011 and currently awaits further correspondence from the USPTO.

In connection with the reexamination requests and the interference proceedings, the Company also filed a motion to stay proceedings with the Court, which was granted on May 18, 2010, whereby the Court stayed the proceedings until at least February 14, 2011, requested that Netlist notify the Court within one week of any action taken by the USPTO in connection with the reexamination or interference proceedings, and requested that the parties file papers by January 31, 2011 stating their position on whether the stay should be extended. The Company filed its paper on January 31, 2011 stating the reasons it believed the stay should be maintained and Netlist, having been given leave to file its paper later, filed its paper on February 21, 2011. Based on these papers the Court ordered a continued stay of the proceedings until at least February 24, 2012, and requested that the parties file papers by January 30, 2012 stating their position on whether the stay should be extended, and continued the request that Netlist notify the Court within one week of any action taken by the USPTO in connection with the reexamination or interference proceedings. Each of the parties filed its paper on January 30, 2012 stating its positions with respect to the stay, and based on these papers the Court ordered a continued stay of the proceedings until the conclusion of the reexamination and interference proceedings, and in the meantime requested that the parties file papers by January 30, 2013 stating their position on whether the stay should be extended. At this time, the Court could decide to maintain or lift the stay.

While the Company intends to defend the lawsuit vigorously, litigation, whether or not determined in the Company’s favor or settled, could be costly and time-consuming and could divert management’s attention and resources, which could adversely affect the Company’s business.

 

90


Table of Contents

Inphi Corporation

Notes to Consolidated Financial Statements—(Continued)

(Dollars in thousands except share and per share amounts)

 

The Company is unable to assess the possible outcome of this matter. However, because of the nature and inherent uncertainties of litigation, should the outcome of this action be unfavorable, the Company’s business, financial condition, results of operations or cash flows could be materially and adversely affected.

Indemnifications

In the ordinary course of business, the Company may provide indemnifications of varying scope and terms to customers, vendors, lessors, investors, directors, officers, employees and other parties with respect to certain matters, including, but not limited to, losses arising out of the Company’s breach of such agreements, services to be provided by the Company, or from intellectual property infringement claims made by third-parties. These indemnifications may survive termination of the underlying agreement and the maximum potential amount of future payments the Company could be required to make under these indemnification provisions may not be subject to maximum loss clauses. The Company has not incurred material costs to defend lawsuits or settle claims related to these indemnifications. As a result, the Company believes the estimated fair value of these agreements is immaterial. Accordingly, the Company has no liabilities recorded for these agreements as of December 31, 2011 and 2010.

17. Related Party Transactions

The Company recognized $27,940 and $21,235 in revenue for the years ended December 31, 2010 and 2009, respectively, from an investor. The receivable balance from the investor as of December 31, 2010 was $3,386. The investor, together with associated entities, held over 13% of the Company’s outstanding shares of common stock before the initial public offering. After the initial public offering in November 2010, the investor, together with associated entities, held less than 10% of the Company’s outstanding shares of common stock. As a result of the decline in ownership below 10% of the outstanding common stock, the Company no longer considers the investor a related party.

In 2007, the Company entered into a software subscription and maintenance agreement with Cadence Design Systems, Inc. (“Cadence”), a related party company. A member of the Company’s Board of Directors is also the Chief Executive Officer, President and a director of Cadence. The Company committed to pay $7,000 payable in 16 quarterly payments through May 2011. In December 2010, the software subscription and maintenance agreement was renewed effective June 30, 2011. Under the new agreement, the Company committed to pay $5,250 payable in 10 quarterly payments through November 2013. The Company paid $2,300 and $2,100 in the years ended December 31, 2011 and 2010, respectively. Operating lease expense related to this agreement included in research and development expense was $2,083 and $1,750 for the years ended December 31, 2011 and 2010, respectively.

18. Subsequent Events

In January 2012, the Board of Directors granted 560,250 options to purchase shares of common stock with an exercise price of $12.34 and 554,850 restricted stock units to employees with a fair value of $12.34. In addition, on February 1, 2012, the Company hired Ford Tamer as the President and Chief Executive Officer of the Company upon the retirement of Young Sohn. The Board of Directors granted the incoming President and Chief Executive Officer of the Company 557,645 options to purchase shares of common stock with an exercise price of $14.80 and 278,822 restricted stock units with a fair value of $14.80.

 

91


Table of Contents

Supplementary Financial Information (Unaudited)

Quarterly Results of Operations

 

     Year Ended December 31, 2011  
     Mar. 31,
2011
     Jun. 30,
2011
     Sept. 30,
2011
    Dec. 31,
2011
 
     (in thousands, except per share amounts)  

Total revenue

   $ 21,504       $ 24,001       $ 16,482      $ 17,310   

Gross profit

     14,117         15,543         9,909        11,041   

Net income (loss)

     2,400         2,443         (2,631     (281

Basic earnings per share

     0.09         0.09         (0.10     (0.01

Diluted earnings per share

     0.08         0.08         (0.10     (0.01

 

     Year Ended December 31, 2010  
     Mar. 31,
2010
     Jun. 30,
2010
     Sept. 30,
2010
     Dec. 31,
2010
 
     (in thousands, except per share amounts)  

Total revenue

   $ 19,086       $ 21,099       $ 21,862       $ 21,146   

Gross profit

     11,899         13,755         14,307         13,794   

Net income(1)

     11,999         7,578         3,579         2,975   

Basic earnings per share

     0.65         0.37         0.11         0.20   

Diluted earnings per share

     0.26         0.14         0.05         0.11   

 

(1) Net income for the quarters ended March 31, 2010, June 30, 2010, September 30, 2010 and December 31, 2010, included the releases and reversals of valuation allowance of $10.1 million, $6.9 million, $4.4 million and $2.6 million, respectively.

 

92


Table of Contents

ITEM 9—CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE

None.

ITEM 9A—CONTROLS AND PROCEDURES

(a) Evaluation of disclosure controls and procedures. We maintain “disclosure controls and procedures,” as such term is defined in Rule 13a-15 (e) under the Securities Exchange Act 1934, or the Exchange Act (as amended), that are designed to provide reasonable assurance that information required to be disclosed by us in reports we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms and that such information is accumulated and communicated to our management, including our Chief Executive Officer and Chief Financial Officer, as appropriate, to allow for timely decisions regarding required disclosure. In designing and evaluating the disclosure controls and procedures, management recognizes that any controls and procedures, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the objectives of the disclosure controls and procedures are met. Our disclosure controls and procedures have been designed to provide reasonable, not absolute assurance. Additionally, in designing disclosure controls and procedures, our management necessarily was required to apply its judgment in evaluating the cost-benefit relationship of possible disclosure controls and procedures. The design of any disclosure controls and procedures also is based in part upon certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions.

Based on their evaluation as of the end of the period covered by this Annual Report on Form 10-K, our Chief Executive Officer and Chief Financial Officer have concluded that, as of such date, our disclosure controls and procedures were effective at the reasonable assurance level.

(b) Management’s Annual Report on Internal Control over Financial Reporting. Our management is responsible for establishing and maintaining adequate internal control over financial reporting, as such term is defined in Exchange Act Rule 13a-15(f). Because of its inherent limitations, internal control over financial reporting may not prevent or detect misstatements. Also, projections of any evaluation of effectiveness to future periods are subject to the risk that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies or procedures may deteriorate. Our management, with the participation of our Chief Executive Officer and Chief Financial Officer, assessed the effectiveness of our internal control over financial reporting as of December 31, 2011. In making this assessment, our management used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission, or COSO, in Internal Control — Integrated Framework. Based on the assessment using those criteria, our management concluded that as of December 31, 2011, our internal control over financial reporting was effective. The effectiveness of our internal control over financial reporting as of December 31, 2011 has been audited by PricewaterhouseCoopers LLP, an independent registered public accounting firm, as stated in their report which is included herein.

(c) Changes in Internal Control over Financial Reporting. There has been no change in our internal control over financial reporting during our most recent fiscal quarter that has materially affected, or is reasonably likely to materially affect, our internal control over financial reporting.

ITEM 9B—OTHER INFORMATION

None.

 

93


Table of Contents

PART III

ITEM 10—DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE

The information required by this item is incorporated by reference from our Proxy Statement to be filed with the Securities and Exchange Commission in connection with the solicitation of proxies for our 2012 Annual Meeting of Stockholders to be held on May 24, 2012, or Proxy Statement.

ITEM 11—EXECUTIVE COMPENSATION

The information required by this item is incorporated by reference from the information under the captions “Election of Directors  –Compensation of Directors” and “Executive Compensation” contained in the Proxy Statement.

ITEM 12— SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS

The information required by this item is incorporated by reference from the information under the captions “Security Ownership of Certain Beneficial Owners and Management” and “Executive Compensation” contained in the Proxy Statement.

ITEM 13—CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS, AND DIRECTOR INDEPENDENCE

The information required by this item is incorporated by reference from the information under the captions “Election of Directors and “Certain Relationships and Related Person Transactions” contained in the Proxy Statement.

ITEM 14—PRINCIPAL ACCOUNTANT FEES AND SERVICES

The information required by this item is incorporated by reference from the information under the caption “Ratification of the Appointment of Independent Registered Public Accounting Firm—Principal Accountant Fees and Services” contained in the Proxy Statement.

 

94


Table of Contents

PART IV

ITEM 15—EXHIBITS AND FINANCIAL STATEMENT SCHEDULES

 

  1. Financial Statements. See “Index to Consolidated Financial Statements” under Part II, “Item 8, Financial Statements and Supplementary Data”.

 

  (a) Documents filed as part of this report:

(1) Financial Statements

Reference is made to the Index to Consolidated Financial Statements of Inphi Corporation under Part II, “Item 8, Financial Statements and Supplementary Data”.

(2) Financial Statement Schedules

All financial statement schedules have been omitted because they are not applicable or not required or because the information is included elsewhere in the Consolidated Financial Statements or the Notes thereto.

(3) Exhibits

See Item 15(b) below. Each management contract or compensatory plan or arrangement required to be filed has been identified.

 

  (b) Exhibits

The exhibits listed in the Exhibit Index below are filed or incorporated by reference as part of this report.

 

  (c) Financial Statements and Schedules

Reference is made to Item 15(a)(2) above.

 

95


Table of Contents

SIGNATURES

Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

INPHI CORPORATION
By:  

/s/ Ford Tamer

 

Ford Tamer

Chief Executive Officer

(Principal Executive Officer)

Date: March 15, 2012

POWER OF ATTORNEY

KNOW ALL PERSONS BY THESE PRESENTS, that each person whose signature appears below constitutes and appoints Ford Tamer and John Edmunds, and each of them, his true and lawful attorneys-in-fact, each with full power of substitution, for him or her in any and all capacities, to sign any amendments to this report on Form 10-K and to file the same, with exhibits thereto and other documents in connection therewith, with the Securities and Exchange Commission, hereby ratifying and confirming all that each of said attorneys-in-fact or their substitute or substitutes may do or cause to be done by virtue hereof.

Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated.

 

Name

  

Title

  

Date

/s/ Ford Tamer

Ford Tamer

  

Chief Executive Officer
(Principal Executive Officer), President and Director

   March 15, 2012

/s/ John Edmunds

John Edmunds

  

Chief Financial Officer and Chief Accounting Officer (Principal Financial and Accounting Officer)

   March 15, 2012

/s/ Diosdado P. Banatao

Diosdado P. Banatao

   Chairman of the Board    March 15, 2012

/s/ Chenming C. Hu

Chenming C. Hu

   Director    March 15, 2012

/s/ David J. Ladd

David J. Ladd

   Director    March 15, 2012

/s/ Peter J. Simone

Peter J. Simone

   Director    March 15, 2012

/s/ Sam S. Srinivasan

Sam S. Srinivasan

   Lead Director    March 15, 2012

/s/ Lip-Bu Tan

Lip-Bu Tan

   Director    March 15, 2012

 

96


Table of Contents

EXHIBIT INDEX

 

Exhibit
Number
 

Description

2.1   Share Purchase Agreement dated as of May 25, 2010, by and among the Registrant, Winyatek Technology Inc. and the shareholder signatories thereto, as amended (excluding certain schedules and exhibits referred to in the agreement, which the Registrant agrees to furnish to the Securities and Exchange Commission upon request) (incorporated by reference to exhibit 2.1 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
3(i)   Restated Certificate of Incorporation of the Registrant (incorporated by reference to exhibit 3(i) of the Registrant’s annual report on Form 10-K filed with the SEC on March 7, 2011).
3(ii)   Amended and Restated Bylaws of the Registrant (incorporated by reference to the exhibit 3(ii).2 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
4.1   Specimen Common Stock Certificate (incorporated by reference to exhibit 4.1 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
4.2   Amended and Restated Investors’ Rights Agreement dated as of August 12, 2010 (incorporated by reference to exhibit 4.2 of the Registrant’s annual report on Form 10-K filed with the SEC on March 7, 2011).
10.1+   Inphi Corporation 2000 Stock Option/Stock Issuance Plan (as amended on June 2, 2010) and related form stock option plan agreements (incorporated by reference to exhibit 10.1 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.2+   Inphi Corporation 2010 Stock Incentive Plan and related form agreements (incorporated by reference to exhibit 10.2 of the Registrant’s annual report on Form 10-K filed with the SEC on March 7, 2011).
10.3+   Form of Indemnification Agreement between the Registrant and its officers and directors (incorporated by reference to exhibit 10.3 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.4+   Offer letter dated July 14, 2007 between Young K. Sohn and the Registrant, as amended (incorporated by reference to exhibit 10.4 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.5+   Change of Control and Severance Agreement dated June 8, 2010, by and between Young K. Sohn and the Registrant (incorporated by reference to exhibit 10.5 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.6   Offer letter dated December 10, 2007 between John Edmunds and the Registrant, as amended (incorporated by reference to exhibit 10.6 to filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.7+   Change of Control and Severance Agreement dated June 8, 2010, by and between John Edmunds and the Registrant (incorporated by reference to exhibit 10.7 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.8+   Offer letter dated October 3, 2007 between Ron Torten and the Registrant, as amended (incorporated by reference to exhibit 10.8 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.11   Lease Agreement between the Registrant and Santa Clara Towers, L.P. dated as of April 27, 2010 (incorporated by reference to exhibit 10.11 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).

 

97


Table of Contents
Exhibit
Number
 

Description

10.12   Lease Agreement between the Registrant and LBA Realty Fund III—Company VII, LLC dated as of June 4, 2010 (incorporated by reference to exhibit 10.12 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.13   Workshop Lease Contract between Winyatek Technology Inc. and Integrated Circuit Solutions Inc. dated as of March 29, 2010 (incorporated by reference to exhibit 10.13 filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
10.14**   Software License and Maintenance Agreement dated as of June 29, 2007, by and between the Registrant and Cadence Design Systems, Inc. (incorporated by reference to exhibit 10.1 of the Registrant’s Current Report on Form 8-K filed with the SEC on March 28, 2011).
10.15   Inphi Corporation Employee Stock Purchase Plan (incorporated by reference to exhibit 99.1 filed with Registration Statement on Form S-8 (File No. 333-179270)).
21.1   List of Subsidiaries (incorporated by reference to the exhibit of the same number filed with Registration Statement on Form S-1 (File No. 333-167564), as amended).
23.1   Consent of PricewaterhouseCoopers LLP, independent registered public accounting firm.
24.1   Power of Attorney (see page 96 of this report).
31.1   Certificate of Chief Executive Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (18 U.S.C. Section 1350).
31.2   Certificate of Chief Financial Officer pursuant to Section 302 of the Sarbanes-Oxley Act of 2002 (18 U.S.C. Section 1350).
32.1(1)   Certificate of Chief Executive Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (18 U.S.C. Section 1350).
32.2(1)   Certificate of Chief Financial Officer pursuant to Section 906 of the Sarbanes-Oxley Act of 2002 (18 U.S.C. Section 1350).
101.INS(2)   XBRL Instance Document
101.SCH(2)   XBRL Taxonomy Extension Schema
101.CAL(2)   XBRL Taxonomy Extension Calculation Linkbase
101.DEF(2)   XBRL Taxonomy Extension Definition Linkbase
101.LAB(2)   XBRL Taxonomy Extension Label Linkbase
101.PRE(2)   XBRL Taxonomy Extension Presentation Linkbase

 

** Confidential treatment requested.
+ Indicates management contract or compensatory plan.

 

(1) The material contained in Exhibit 32.1 and Exhibit 32.2 is not deemed “filed” with the SEC and is not to be incorporated by reference into any filing of the Company under the Securities Act of 1933 or the Securities Exchange Act of 1934, whether made before or after the date hereof and irrespective of any general incorporation language contained in such filing, except to the extent that the registrant specifically incorporates it by reference.

 

(2) In accordance with Rule 406T of Regulation S-T, the information furnished in these exhibits will not be deemed “filed” for purpose of Section 18 of the Exchange Act. Such exhibits will not be deemed to be incorporated by reference into any filing under the Securities Act or Exchange Act.

 

98