Form 10-Q
Table of Contents

 

 

UNITED STATES

SECURITIES AND EXCHANGE COMMISSION

Washington, DC 20549

 

 

Form 10-Q

 

 

 

x

QUARTERLY REPORT UNDER SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934

For the quarterly period ended March 31, 2014

Commission File Number: 0-31285

 

 

TTM TECHNOLOGIES, INC.

(Exact name of registrant as specified in its charter)

 

 

 

DELAWARE   91-1033443

(State or other jurisdiction of

incorporation or organization)

 

(I.R.S. Employer

Identification No.)

1665 Scenic Avenue Suite 250, Costa Mesa, California 92626

(Address of principal executive offices)

(714) 327-3000

(Registrant’s telephone number, including area code)

 

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.    Yes  x    No  ¨

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files).    Yes  x    No  ¨

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.

 

Large accelerated filer

 

¨

  

Accelerated filer

  x

Non-accelerated filer

 

¨  (Do not check if a smaller reporting company)

  

Smaller reporting company

 

¨

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).    Yes  ¨    No  x

Number of shares of common stock, $0.001 par value, of registrant outstanding at May 1, 2014: 83,344,619

 

 

 

 


Table of Contents

TABLE OF CONTENTS

 

 

     Page  

PART I: FINANCIAL INFORMATION

  

Item 1. Financial Statements (unaudited)

  

Consolidated Condensed Balance Sheets as of March 31, 2014 and December 30, 2013

     3   

Consolidated Condensed Statements of Operations for the quarters ended March 31, 2014 and April  1, 2013

     4   

Consolidated Condensed Statements of Comprehensive (Loss) Income for the quarters ended March  31, 2014 and April 1, 2013

     5   

Consolidated Condensed Statements of Cash Flows for the quarters ended March 31, 2014 and April  1, 2013

     6   

Notes to Consolidated Condensed Financial Statements

     7   

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

     19   

Item 3. Quantitative and Qualitative Disclosures About Market Risk

     25   

Item 4. Controls and Procedures

     26   

PART II: OTHER INFORMATION

  

Item 1. Legal Proceedings

     26   

Item 1A. Risk Factors

     26   

Item 6. Exhibits

     40   

SIGNATURES

     41   

 

2


Table of Contents

PART I. FINANCIAL INFORMATION

Item 1. Financial Statements (unaudited)

TTM TECHNOLOGIES, INC.

Consolidated Condensed Balance Sheets

 

     March 31,
2014
     December 30,
2013
 
    

(Unaudited)

(In thousands)

 

ASSETS

     

Current assets:

     

Cash and cash equivalents

   $ 317,993       $ 330,554   

Accounts receivable, net

     202,092         277,070   

Accounts receivable due from related parties

     16,975         13,312   

Inventories

     139,315         138,145   

Prepaid expenses and other current assets

     42,991         45,910   
  

 

 

    

 

 

 

Total current assets

     719,366         804,991   

Property, plant and equipment, net of accumulated depreciation

     788,296         810,672   

Goodwill and definite-lived intangibles, net

     37,509         39,781   

Deposits and other non-current assets

     16,963         18,131   
  

 

 

    

 

 

 

Total Assets

   $ 1,562,134       $ 1,673,575   
  

 

 

    

 

 

 

LIABILITIES AND EQUITY

     

Current liabilities:

     

Short-term debt, including current portion of long-term debt

   $ 96,205       $ 96,204   

Accounts payable

     154,888         192,357   

Accounts payable due to related parties

     19,882         19,547   

Accrued salaries, wages and benefits

     38,630         50,040   

Equipment payable

     53,628         59,936   

Other accrued expenses

     29,252         39,919   
  

 

 

    

 

 

 

Total current liabilities

     392,485         458,003   
  

 

 

    

 

 

 

Convertible senior notes, net of discount

     222,488         203,735   

Long-term debt

     225,702         273,804   

Other long-term liabilities

     27,121         32,738   
  

 

 

    

 

 

 

Total long-term liabilities

     475,311         510,277   
  

 

 

    

 

 

 

Commitments and contingencies (Note 11)

     

Equity:

     

Common stock, $0.001 par value; 200,000 shares authorized, 83,263 and 82,655 shares issued and outstanding in 2014 and 2013, respectively

     83         83   

Additional paid-in capital

     581,417         576,644   

Retained earnings

     60,473         64,272   

Statutory surplus reserve

     18,692         18,692   

Accumulated other comprehensive income

     33,673         45,604   
  

 

 

    

 

 

 

Total equity

     694,338         705,295   
  

 

 

    

 

 

 

Total Liabilities and Equity

   $ 1,562,134       $ 1,673,575   
  

 

 

    

 

 

 

See accompanying notes to consolidated condensed financial statements.

 

3


Table of Contents

TTM TECHNOLOGIES, INC.

Consolidated Condensed Statements of Operations

For the Quarters Ended March 31, 2014 and April 1, 2013

 

     Quarter Ended  
     March 31,
2014
    April 1,
2013
 
    

(Unaudited)

(In thousands, exceptper share data)

 

Net sales

   $ 291,895      $ 325,392   

Cost of goods sold

     253,389        274,662   
  

 

 

   

 

 

 

Gross profit

     38,506        50,730   
  

 

 

   

 

 

 

Operating expenses:

    

Selling and marketing

     9,323        9,190   

General and administrative

     22,494        26,558   

Amortization of definite-lived intangibles

     2,236        2,328   
  

 

 

   

 

 

 

Total operating expenses

     34,053        38,076   
  

 

 

   

 

 

 

Operating income

     4,453        12,654   
  

 

 

   

 

 

 

Other income (expense):

    

Interest expense

     (6,206     (6,278

Loss on extinguishment of debt

     (506      

Other, net

     (3,395     1,001   
  

 

 

   

 

 

 

Total other expense, net

     (10,107     (5,277
  

 

 

   

 

 

 

(Loss) Income before income taxes

     (5,654     7,377   

Income tax benefit (provision)

     1,855        (784
  

 

 

   

 

 

 

Net (loss) income

     (3,799     6,593   

Less: Net income attributable to the noncontrolling interest

            (1,441
  

 

 

   

 

 

 

Net (loss) income attributable to TTM Technologies, Inc. stockholders

   $ (3,799   $ 5,152   
  

 

 

   

 

 

 

(Loss) Earnings per share attributable to TTM Technologies, Inc. stockholders:

    

Basic (loss) earnings per share

   $ (0.05   $ 0.06   
  

 

 

   

 

 

 

Diluted (loss) earnings per share

   $ (0.05   $ 0.06   
  

 

 

   

 

 

 

Weighted-average shares used in computing per share amounts:

    

Basic

     82,925        82,150   
  

 

 

   

 

 

 

Diluted

     82,925        82,842   
  

 

 

   

 

 

 

See accompanying notes to consolidated condensed financial statements.

 

4


Table of Contents

TTM TECHNOLOGIES, INC.

Consolidated Condensed Statements of Comprehensive (Loss) Income

For the Quarters Ended March 31, 2014 and April 1, 2013

 

     Quarter Ended  
     March 31,
2014
    April 1,
2013
 
     (Unaudited)  
     (In thousands)  

Net (loss) income

   $ (3,799   $ 6,593   

Other comprehensive (loss) income:

    

Foreign currency translation adjustments, net of tax

     (12,093     2,533   

Net unrealized gains (losses) on cash flow hedges:

    

Unrealized (loss) gain on effective cash flow hedges during the period, net

     120        (381

Loss realized in net earnings

     25        —     
  

 

 

   

 

 

 

Net

     145        (381
  

 

 

   

 

 

 

Unrealized gains (losses) on available for sale securities:

    

Unrealized loss on available for sale securities during period

     (20     (18

Loss realized in net earnings

     37        —     
  

 

 

   

 

 

 

Net

     17        (18
  

 

 

   

 

 

 

Other comprehensive (loss) income, net of tax

     (11,931     2,134   
  

 

 

   

 

 

 

Comprehensive (loss) income

     (15,730     8,727   

Less: comprehensive income attributable to the noncontrolling interest

     —          (1,730
  

 

 

   

 

 

 

Comprehensive (loss) income attributable to TTM Technologies, Inc. stockholders

   $ (15,730   $ 6,997   
  

 

 

   

 

 

 

See accompanying notes to consolidated condensed financial statements.

 

5


Table of Contents

TTM TECHNOLOGIES, INC.

Consolidated Condensed Statements of Cash Flows

For the Quarters Ended March 31, 2014 and April 1, 2013

 

     Quarter Ended  
     March 31,
2014
    April 1,
2013
 
     (Unaudited)  
     (In thousands)  

Cash flows from operating activities:

    

Net (loss) income

   $ (3,799   $ 6,593   

Adjustments to reconcile net income to net cash provided by operating activities:

    

Depreciation of property, plant and equipment

     23,707        23,137   

Amortization of definite-lived intangible assets

     2,236        2,328   

Accretion of convertible notes debt discount and amortization of debt issuance costs

     2,523        2,054   

Deferred income taxes

     1,266        1,257   

Stock-based compensation

     2,168        2,330   

Loss on extinguishment of debt

     506        —     

Other

     3,660        (555

Payment of accreted interest on convertible senior notes

     (1,324     —     

Changes in operating assets and liabilities:

    

Accounts and notes receivable, net

     71,315        745   

Inventories

     (1,169     (4,609

Prepaid expenses and other current assets

     2,385        1,917   

Accounts payable

     (36,919     (24,971

Accrued salaries, wages and benefits and other accrued expenses

     (21,179     141   
  

 

 

   

 

 

 

Net cash provided by operating activities

     45,376        10,367   
  

 

 

   

 

 

 

Cash flows from investing activities:

    

Purchase of property, plant and equipment and equipment deposits

     (28,914     (11,669

Proceeds from sale of property, plant and equipment and assets held for sale

     100        128   
  

 

 

   

 

 

 

Net cash used in investing activities

     (28,814     (11,541
  

 

 

   

 

 

 

Cash flows from financing activities:

    

Proceeds from issuance of convertible senior notes

     30,000        —     

Repayment of long-term debt borrowing

     (48,101     —     

Repurchase of convertible senior notes

     (5,411     —     

Payment of debt issuance costs

     (1,626     —     

Purchase of convertible senior note hedge

     (7,953     —     

Proceeds from warrants

     4,053        —     
  

 

 

   

 

 

 

Net cash used in financing activities

     (29,038     —     
  

 

 

   

 

 

 

Effect of foreign currency exchange rates on cash and cash equivalents

     (85     (168
  

 

 

   

 

 

 

Net decrease in cash and cash equivalents

     (12,561     (1,342

Cash and cash equivalents at beginning of period

     330,554        285,433   
  

 

 

   

 

 

 

Cash and cash equivalents at end of period

   $ 317,993      $ 284,091   
  

 

 

   

 

 

 

Noncash transactions:

    

Property, plant and equipment recorded in equipment payable

   $ 67,924      $ 71,544   

See accompanying notes to consolidated condensed financial statements.

 

6


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements

(Unaudited)

(Dollars and shares in thousands, except per share data)

(1) Nature of Operations and Basis of Presentation

TTM Technologies, Inc. (the Company or TTM) is a leading global provider of time-critical and technologically complex printed circuit board (PCB) products and backplane assemblies (PCBs populated with electronic components), which serve as the foundation of sophisticated electronic products. The Company provides advanced technology products and offers a one-stop manufacturing solution to customers from engineering support to prototype development through final volume production. The Company serves a diversified customer base in various markets throughout the world, including manufacturers of networking/communications infrastructure products, touch screen tablets and smartphones. The Company also serves aerospace and defense, high-end computing, and industrial/medical industries. The Company’s customers include both original equipment manufacturers (OEMs) and electronic manufacturing services (EMS) providers.

The accompanying consolidated condensed financial statements have been prepared by the Company, without audit, pursuant to the rules and regulations of the Securities and Exchange Commission (SEC). Certain information and disclosures normally included in financial statements prepared in accordance with accounting principles generally accepted in the United States of America have been condensed or omitted pursuant to such rules and regulations. These consolidated condensed financial statements reflect all adjustments (consisting only of normal recurring adjustments) which, in the opinion of management, are necessary to present fairly the financial position, the results of operations and cash flows of the Company for the periods presented. It is suggested that these consolidated condensed financial statements be read in conjunction with the consolidated financial statements and the notes thereto included in the Company’s most recent Annual Report on Form 10-K. The results of operations for the interim periods are not necessarily indicative of the results to be expected for the full year. The preparation of financial statements in accordance with U.S. generally accepted accounting principles requires management to make estimates and assumptions that affect the amounts reported in the Company’s consolidated condensed financial statements and accompanying notes. Actual results could differ materially from those estimates. The Company uses a 13-week fiscal quarter accounting period with fourth quarter ending on the Monday nearest December 31.

(2) Restructuring Charges

On September 6, 2013, the Company announced its plan to cease manufacturing at its Suzhou, China facility and lay off 774 employees at this site. The Company has ceased production, but complete shutdown of the facility is not expected until the second quarter of 2014. The Suzhou, China manufacturing facility is included in the Asia Pacific reporting unit and operating segment.

As of March 31, 2014, 27 employees had not yet been separated. The Company expects most of the remaining employees to be separated and the remaining accrued restructuring costs to be paid by the end of the second quarter of 2014. Accrued restructuring costs are included as a component of accrued salaries, wages and benefits in the consolidated condensed balance sheet.

The below table shows the utilization of the accrued restructuring costs during the quarter ended March 31, 2014:

 

 

     (In thousands)  

Accrued at December 30, 2013

   $ 637   

Adjustment to estimated employee separation charges

     (24

Amount paid

     (237
  

 

 

 

Accrued at March 31, 2014

   $ 376   
  

 

 

 

(3) Inventories

Inventories as of March 31, 2014 and December 30, 2013 consist of the following:

 

     As of  
     March 31,
2014
     December 30,
2013
 
     (In thousands)  

Inventories:

     

Raw materials

   $ 43,950       $ 42,533   

Work-in-process

     52,346         48,338   

Finished goods

     43,019         47,274   
  

 

 

    

 

 

 
   $ 139,315       $ 138,145   
  

 

 

    

 

 

 

 

7


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

(4) Long-term Debt and Letters of Credit

The following table summarizes the long-term debt of the Company as of March 31, 2014 and December 30, 2013:

 

 

     Average Effective
Interest Rate
as of March 31,
2014
   March 31,
2014
    Average Effective
Interest Rate
as of December 30,
2013
   December 30,
2013
 
     (In thousands)  

Term loan due September 2016

   2.53%    $ 321,900      2.55%    $ 370,000   

Other

   6.00%      7      6.00%      8   
     

 

 

      

 

 

 
        321,907           370,008   

Less: current maturities

        (96,205        (96,204
     

 

 

      

 

 

 

Long-term debt, less current maturities

      $ 225,702         $ 273,804   
     

 

 

      

 

 

 

The calendar maturities of long-term debt through 2016 are as follows:

 

     (In thousands)  

Remaining 2014

   $ 48,103   

2015

     96,204   

2016

     177,600   
  

 

 

 
   $ 321,907   
  

 

 

 

Credit Agreement

In 2012, the Company became a party to a facility agreement (Credit Agreement) consisting of a $370,000 senior secured term loan (Term Loan), a $90,000 senior secured revolving loan (Revolving Loan), and a secured $80,000 letters of credit facility (Letters of Credit Facility). The Term Loan and Letters of Credit Facility will mature on September 14, 2016. The Revolving Loan will mature on March 14, 2016. The Credit Agreement is secured by substantially all of the assets of the Company’s Asia Pacific operating segment and is senior to all other debt, including the convertible senior notes. See Note 5. The Company has fully and unconditionally guaranteed the full and punctual payment of all Credit Agreement related obligations of its Asia Pacific operating segment.

As of March 31, 2014 and December 30, 2013, the remaining unamortized debt issuance costs included in other non-current assets was $1,728 and $1,937 and is amortized to interest expense over the term of the Company’s Credit Agreement using the effective interest rate method. At March 31, 2014, the remaining amortization period for the unamortized debt issuance costs was 2.2 years.

The Company is also required to pay a commitment fee of 0.50% per annum on any unused portion of the loan and letters of credit facility granted under the Credit Agreement. The Company incurred commitment fees related to unused borrowing availability of $133 and $96 for the quarters ended March 31, 2014 and April 1, 2013, respectively. As of March 31, 2014, the outstanding amount of the Term Loan under the Credit Agreement is $321,900, of which $96,200 is due for repayment in September 2014 and March 2015 and is included as short-term debt, with the remaining $225,700 included as long-term debt. None of the Revolver was outstanding under the Credit Agreement as of March 31, 2014. Available borrowing capacity under the Revolving Loan was $90,000 at March 31, 2014.

Other Credit Facility

Additionally, the Company is party to a revolving loan credit facility with a lender in the People’s Republic of China (PRC). Under this arrangement, the lender has made available to the Company approximately $46,700 in unsecured borrowing with all terms of the borrowing to be negotiated at the time the revolver is drawn upon. There are no commitment fees on the unused portion of the revolver and this arrangement expires in December 2014. As of March 31, 2014, the revolver had not been drawn upon.

Letters of Credit

The Company has an $80,000 Letters of Credit Facility under the Credit Agreement, as mentioned above. As of March 31, 2014, letters of credit in the amount of $56,986 were outstanding under this Credit Agreement. The Company has other standby letters of credit outstanding in the amount of $3,394 million, as well other unused letter of credit facilities in the amount of $31,100. The outstanding standby letters of credit and unused letter of credit facilities expire between December 31, 2014 and February 28, 2015.

 

8


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

(5) Convertible Senior Notes

Convertible Senior Notes due 2020

In December 2013, the Company issued 1.75% convertible senior notes due December 15, 2020, in a public offering for an aggregate principal amount of $220,000. The convertible senior notes bear interest at a rate of 1.75% per annum. Interest is payable semiannually in arrears on June 15 and December 15 of each year. The convertible senior notes are senior unsecured obligations and rank equally to the Company’s future unsecured senior indebtedness and senior in right of payment to any of the Company’s future subordinated indebtedness.

During the quarter ended March 31, 2014, the Company closed the sale of an additional $30,000 aggregate principal amount of its 1.75% convertible senior notes due 2020 (Additional Notes). The Additional Notes were sold pursuant to the exercise of an over-allotment option granted by the Company in the underwriting agreement related to the offer and sale of $220,000 aggregate principal amount of its 1.75% convertible senior notes due 2020.

In connection with the offering of the Additional Notes, the Company entered into additional convertible note hedge and warrant transactions (Additional Call Spread Transaction) with respect to shares of its common stock. The additional convertible note hedge, which cost an aggregate $7,953 and was recorded, net of tax, as a reduction of additional paid-in capital, consists of the Company’s option to purchase up to 3,100 common stock shares at a price of $9.64 per share and will expire upon the maturity of the notes. Additionally, the Company sold warrants to purchase 3,100 shares of its common stock at a price of $14.26 per share. The warrants expire ratably from March 2021 through January 2022. The proceeds from the sale of warrants of $4,053 was recorded as an increase to additional paid-in capital. The 2020 Additional Call Spread Transaction has no effect on the terms of the convertible senior notes due 2020 and reduces potential dilution by effectively increasing the conversion price of the convertible senior notes due 2020 to $14.26 per share of the Company’s common stock.

The maximum number of shares issuable upon conversion, including the effect of a fundamental change and subject to Other Conversion Rate Adjustments, would be 32,425.

Convertible Senior Notes due 2015

In May 2008, the Company issued 3.25% convertible senior notes due May 15, 2015, in a public offering for an aggregate principal amount of $175,000. The convertible senior notes bear interest at a rate of 3.25% per annum. Interest is payable semiannually in arrears on May 15 and November 15 of each year. The convertible senior notes are senior unsecured obligations and rank equally to the Company’s future unsecured senior indebtedness and senior in right of payment to any of the Company’s future subordinated indebtedness.

During the quarter ended March 31, 2014, the Company repurchased $6,514 of notes at approximately 103.4% of their principal amount. The repurchase of the convertible senior notes was accounted for as an extinguishment of debt, and accordingly, the Company recognized a $506 loss primarily associated with the premium paid to repurchase the convertible senior notes and the recognition of certain remaining unamortized debt discount and issuance costs.

The maximum number of shares issuable upon conversion, including the effect of a fundamental change and subject to Other Conversion Rate Adjustments, would be 2,587.

The accounting standards for convertible debt instruments that may be fully or partially settled in cash upon conversion require the debt and equity components to be separately accounted for in a manner that reflects our nonconvertible borrowing rate when interest expense is recognized in subsequent periods. The amount recorded as debt is based on the fair value of the debt component as a standalone instrument, determined using an average interest rate for similar nonconvertible debt issued by entities with credit ratings comparable to the Company’s at the time of issuance. The difference between the debt recorded at inception and its principal amount is to be accreted to principal through interest expense through the estimated life of the note.

As of March 31, 2014 and December 30, 2013, the following summarizes the liability and equity components of the convertible senior notes:

 

     As of March 31, 2014      As of December 30, 2013  
     Principal      Unamortized
Discount
    Net
Carrying
Amount
     Principal      Unamortized
Discount
    Net
Carrying
Amount
 
     (in thousands)  

Liability components:

  

Convertible senior notes due 2020

   $ 250,000       $ (58,295   $ 191,705       $ 220,000       $ (52,833   $ 167,167   

Convertible senior notes due 2015

     32,395         (1,612     30,783         38,909         (2,341     36,568   
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

   

 

 

 

Total

   $ 282,395       $ (59,907   $ 222,488       $ 258,909       $ (55,174   $ 203,735   
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

   

 

 

 

 

9


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

 

     As of March 31, 2014      As of December 30, 2013  
     Embedded
conversion
option —
Convertible
Senior
Notes
     Embedded
conversion
option  —
Convertible
Senior
Notes
Issuance
Costs
    Total      Embedded
conversion
option —
Convertible
Senior
Notes
     Embedded
conversion
option  —
Convertible
Senior
Notes
Issuance
Costs
    Total  
     (in thousands)  

Equity components:

               

Additional paid-in capital:

               

Convertible senior notes due 2020

   $ 60,227       $ (1,916   $ 58,311       $ 53,000       $ (1,644   $ 51,356   

Convertible senior notes due 2015

     39,781       $ (1,413     38,368         39,928       $ (1,413     38,515   
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

   

 

 

 
   $ 100,008       $ (3,329   $ 96,679       $ 92,928       $ (3,057   $ 89,871   
  

 

 

    

 

 

   

 

 

    

 

 

    

 

 

   

 

 

 

The components of interest expense resulting from the convertible senior notes for the quarters ended March 31, 2014 and April 1, 2013 are as follows:

 

     For the Quarter Ended  
     March 31,
2014
     April 1,
2013
 
     (In thousands)  

Contractual coupon interest

     

Convertible senior notes due 2020

   $ 1,085       $ —     

Convertible senior notes due 2015

     263         1,422   
  

 

 

    

 

 

 
   $ 1,348       $ 1,422   
  

 

 

    

 

 

 

Amortization of debt discount

     

Convertible senior notes due 2020

   $ 1,764       $ —     

Convertible senior notes due 2015

     338         1,680   
  

 

 

    

 

 

 
   $ 2,102       $ 1,680   
  

 

 

    

 

 

 

Amortization of debt issuance costs

     

Convertible senior notes due 2020

   $ 177       $ —     

Convertible senior notes due 2015

     34         169   
  

 

 

    

 

 

 
   $ 211       $ 169   
  

 

 

    

 

 

 

As of March 31, 2014 and December 30, 2013, remaining unamortized debt issuance costs included in other non-current assets were $6,005 and $5,399, respectively. The debt issuance costs and debt discount are being amortized to interest expense over the term of the convertible senior notes using the effective interest rate method. At March 31, 2014, the remaining weighted average amortization period for the unamortized senior convertible note discount and debt issuance costs was 6.6 years.

For the quarter ended March 31, 2014, the amortization of debt discount and debt issuance costs for the 2020 convertible senior notes and the 2015 convertible senior notes is based on an effective interest rate of 6.48% and 8.37%, respectively. For the quarter ended April 1, 2013, the amortization of debt discount and debt issuance costs for the 2015 convertible senior notes is based on an effective interest rate of 8.37%.

(6) Income Taxes

The Company’s effective tax rate was 32.8% and 10.6% for the quarters ended March 31, 2014 and April 1, 2013, respectively. The Company’s effective tax rate will generally differ from the U.S. federal statutory rate of 35% due to favorable tax rates associated with earnings from the Company’s operations in lower-tax jurisdictions in China, the apportioned state income tax rates, generation of other credits and deductions available to us, and certain non-deductible items.

During the quarter ended March 31, 2014, the Company’s effective tax rate was further impacted by a discrete tax benefit resulting from the retroactive approval of the high technology enterprise status for certain Chinese subsidiaries within the Company’s Asia Pacific operating segment. The Company’s effective tax rate for the quarter ended April 1, 2013 was impacted by the recognition of discrete tax benefits from the extension of federal research and development credit laws, and from the approval of research and development deduction in China.

 

10


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

Certain foreign losses generated are not more than likely to be realizable, and thus, no income tax benefit has been recognized on these losses. The Company’s foreign earnings attributable to the Asia Pacific operating segment will be permanently reinvested in such foreign jurisdictions and, therefore, no deferred tax liabilities for U.S. income taxes on undistributed earnings are recorded.

(7) Financial Instruments

Derivatives

The Company enters into foreign currency forward contracts to mitigate the impact of changes in foreign currency exchange rates and to reduce the volatility of purchases and other obligations generated in currencies other than the functional currencies. The Company’s foreign subsidiaries may at times purchase forward exchange contracts to manage their foreign currency risks in relation to certain purchases of machinery denominated in foreign currencies other than the Company’s foreign functional currency. The notional amount of the foreign exchange contracts as of March 31, 2014 and December 30, 2013 was approximately $40,038 and $47,000, respectively. The Company has designated certain of these foreign exchange contracts as cash flow hedges.

The fair values of derivative instruments in the consolidated condensed balance sheet are as follows:

 

          Asset / (Liability) Fair
Value
 
    

Balance Sheet

Location

   March 31,
2014
    December 30,
2013
 
          (In thousands)  

Cash flow derivative instruments designated as hedges:

    

Foreign exchange contracts

   Other accrued expenses    $ (70   $ (751

Foreign exchange contracts

   Deposits and other non-current assets      —          10   
       

Cash flow derivative instruments not designated as hedges:

    

Foreign exchange contracts

   Prepaid expenses and other current assets      310        647   

Foreign exchange contracts

   Other accrued expenses      (1,146     (899

Foreign exchange contracts

   Other long-term liabilities      (812     (1,288
     

 

 

   

 

 

 
      $ (1,718   $ (2,281
     

 

 

   

 

 

 

The following table provides information about the amounts recorded in accumulated other comprehensive income related to derivatives designated as cash flow hedges, as well as the amounts recorded in each caption in the consolidated condensed statement of operations when derivative amounts are reclassified out of accumulated other comprehensive income:

 

          For the Quarter Ended  
          March 31, 2014      April 1, 2013  
          Effective Portion      Ineffective
Portion
     Effective Portion      Ineffective
Portion
 
     Financial
Statement
Caption
   Gain/(Loss)
Recognized in
Other
Comprehensive
Income
     Gain/(Loss)
Reclassified
into
Income
     Gain/(Loss)
Reclassified
into
Income
     Gain/(Loss)
Recognized in
Other
Comprehensive
Income
    Gain/(Loss)
Reclassified
into
Income
     Gain/(Loss)
Recognized
into
Income
 
     (In thousands)  

Cash flow hedge:

                   

Foreign currency forward

   Depreciation expense    $ 120       $ 25      $ —         $ (381   $ —         $ —     
     

 

 

    

 

 

    

 

 

    

 

 

   

 

 

    

 

 

 
      $ 120       $ 25      $ —         $ (381   $ —         $ —     
     

 

 

    

 

 

    

 

 

    

 

 

   

 

 

    

 

 

 

 

11


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

The following table provides a summary of the activity associated with the designated cash flow hedges reflected in accumulated other comprehensive income for the quarters ended March 31, 2014 and April 1, 2013:

 

     For the Quarter Ended  
     March 31,
2014
    April 1,
2013
 
     (In thousands)  

Beginning balance unrealized loss, net of tax

   $ (1,613   $ (15

Changes in fair value, net of tax

     120        (381

Reclassification to earnings

     25       —    
  

 

 

   

 

 

 

Ending balance unrealized loss, net of tax

   $ (1,468   $ (396
  

 

 

   

 

 

 

The Company expects that approximately $162 of expense will be reclassified into the statement of operations, net of tax, in the next 12 months.

The net gain (loss) recognized in other, net in the consolidated condensed statement of operations on derivative instruments not designated as hedges is as follows:

 

     For the Quarter Ended  
     March 31,
2014
     April 1,
2013
 
     (In thousands)  

Derivative instruments not designated as hedges:

     

Foreign exchange contracts

   $ 522       $ (531

Interest rate swap

     —           477   
  

 

 

    

 

 

 
   $ 522       $ (54
  

 

 

    

 

 

 

Other Financial Instruments

The carrying amount and estimated fair value of the Company’s financial instruments at March 31, 2014 and December 30, 2013 were as follows:

 

     March 31, 2014      December 30, 2013  
     Carrying
Amount
     Fair
Value
     Carrying
Amount
     Fair
Value
 
     (In thousands)  

Available for sale securities

   $ 69       $ 69       $ 148       $ 148   

Derivative assets, current

     310         310         647         647   

Derivative liabilities, current

     1,216         1,216         1,650         1,650   

Derivative assets, non-current

     —           —           10         10   

Derivative liabilities, non-current

     812         812         1,288         1,288   

Long-term debt

     321,907         321,248         370,008         369,402   

Convertible senior notes due 2015

     30,783         33,360         36,568         39,960   

Convertible senior notes due 2020

     191,705         277,425         167,167         237,050   

The fair value of available for sale securities was determined using quoted market prices for the securities on an active exchange.

The fair value of the derivative instruments was determined using pricing models developed based on the LIBOR swap rate, foreign currency exchange rates, and other observable market data, including quoted market prices, as appropriate. The values were adjusted to reflect nonperformance risk of the counterparty and the Company, as necessary.

The fair value of the long-term debt was estimated based on discounting the debt over its life using current market rates for similar debt as of March 31, 2014 and December 30, 2013.

The fair value of the convertible senior notes was estimated based on quoted market prices of the securities on an active exchange, which are considered Level 1 inputs.

As of March 31, 2014 and December 30, 2013, the Company’s other financial instruments also included cash and cash equivalents, accounts receivable, accounts payable and equipment payables. Due to short-term maturities, the carrying amount of these instruments approximates fair value.

 

12


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

(8) Accumulated Other Comprehensive Income

The following provides a summary of the components of accumulated other comprehensive income as of March 31, 2014 and December 30, 2013:

 

     Foreign
Currency
Translation
    Gains (Losses)
on Cash Flow
Hedges
    Unrealized
Gains (Losses)
on Available
for Sale
Securities
    Total  
     (In thousands)  

Ending balance at December 30, 2013

   $ 47,280      $ (1,613   $ (63   $ 45,604   

Other comprehensive income (loss) before reclassifications

     (12,093     120        (20     (11,993

Amounts reclassified from accumulated other comprehensive income

            25        37        62   
  

 

 

   

 

 

   

 

 

   

 

 

 

Other comprehensive (loss) income

     (12,093     145        17        (11,931
  

 

 

   

 

 

   

 

 

   

 

 

 

Ending balance at March 31, 2014

   $ 35,187      $ (1,468   $ (46   $ 33,673   
  

 

 

   

 

 

   

 

 

   

 

 

 

Foreign currency translation amounts as of March 31, 2014 and December 30, 2013 are net of tax of $3,013 and $3,132, respectively.

The following provides a summary of reclassifications out of accumulated other comprehensive income for the quarters ended March 31, 2014 and April 1, 2013:

 

          Amount Reclassified from
Accumulated Other
Comprehensive Income
For the Quarter Ended
 

Details about Accumulated Other Comprehensive Income

Components

   Statement of Operations Location   
March 31,
2014
    
April 1,
2013
 

Loss on cash flow hedges

   Depreciation expense, net of tax    $ 25       $ —     
     

 

 

    

 

 

 

Loss on available for sale securities

   Other, net, net of tax    $ 37       $ —     
     

 

 

    

 

 

 

(9) Significant Customers and Concentration of Credit Risk

In the normal course of business, the Company extends credit to its customers, which are concentrated primarily in the computer, networking and communications, and aerospace and defense industries. Most are located outside the United States, with the exception of aerospace and defense industries. The Company performs ongoing credit evaluations of customers, does not require collateral and considers the credit risk profile of the entity from which the receivable is due in further evaluating collection risk.

The Company’s customers include both OEMs and EMS companies. The Company’s OEM customers often direct a significant portion of their purchases through EMS companies. While the Company’s customers include both OEM and EMS providers, the Company measures customer concentration based on OEM companies, as they are the ultimate end customers.

For the quarters ended March 31, 2014 and April 1, 2013 one customer accounted for approximately 16% and 14%, respectively, of the Company’s net sales.

(10) Fair Value Measures

The Company measures at fair value its financial and non-financial assets by using a fair value hierarchy that prioritizes the inputs to valuation techniques used to measure fair value. Fair value is the price that would be received to sell an asset or paid to transfer a liability in an orderly transaction between market participants at the measurement date, essentially an exit price, based on the highest and best use of the asset or liability.

 

13


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

At March 31, 2014 and December 30, 2013, the following financial assets and liabilities were measured at fair value on a recurring basis using the type of inputs shown:

 

     March 31,
2014
     Fair Value Measurements Using:  
        Level 1 Inputs      Level 2 Inputs      Level 3 Inputs  
     (In thousands)  

Money market funds

   $ 147,339       $ 147,339       $ —          —    

Available for sale securities

     69         69         —          —    

Foreign exchange derivative assets

     310         —          310         —    

Foreign exchange derivative liabilities

     2,028         —          2,028         —    
     December 30,
2013
     Fair Value Measurements Using:  
        Level 1 Inputs      Level 2 Inputs      Level 3 Inputs  
     (In thousands)  

Money market funds

   $ 23,838       $ 23,838       $ —          —    

Available for sale securities

     148         148         —          —    

Foreign exchange derivative assets

     657         —          657         —    

Foreign exchange derivative liabilities

     2,938         —          2,938         —    

There were no transfers of financial assets or liabilities between Level 1 and Level 2 inputs for the quarters ended March 31, 2014 and April 1, 2013. See Note 7 for the fair value disclosures over long-term debt and convertible senior notes.

(11) Commitments and Contingencies

Legal Matters

The Company is subject to various legal matters, which it considers normal for its business activities. While the Company currently believes that the amount of any reasonably possible or probable loss for known matters would not be material to the Company’s financial condition, the outcome of these actions is inherently difficult to predict. In the event of an adverse outcome, the ultimate potential loss could have a material adverse effect on the Company’s financial condition or results of operations in a particular period. The Company has accrued amounts for its loss contingencies which are probable and estimable at March 31, 2014 and December 30, 2013. However, these amounts are not material to the consolidated condensed financial statements of the Company.

Environmental Matters

The process to manufacture PCBs requires adherence to city, county, state, federal and foreign environmental regulations regarding the storage, use, handling and disposal of chemicals, solid wastes and other hazardous materials as well as compliance with air quality standards. The Company believes that its facilities in the United States comply in all material respects with applicable environmental laws and regulations. In China, governmental authorities are taking various steps to tighten the rules and regulations governing environmental issues. An update to Chinese environmental law was issued in late 2012, but allows for an interim period in which foreign entities may adjust to the new regulatory regime and come into full compliance with the new laws. The Company’s plants in China are not yet in full compliance with the current environmental regulations as updated in late 2012. The Company does not anticipate any immediate risk of government fines or temporary closure of Chinese plants. The Company has established and enacted an investment plan, which includes capital expenditures estimated to be approximately $4,700 for 2014, to address the regulatory changes in order to come into full compliance during the interim period.

 

14


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

(12) Earnings Per Share

The following is a reconciliation of the numerator and denominator used to calculate basic earnings per share and diluted earnings per share for the quarters ended March 31, 2014 and April 1, 2013:

 

     Quarter Ended  
     March 31,
2014
    April 1,
2013
 
     (In thousands, except per share amounts)  

Net (loss) income attributable to TTM Technologies, Inc. stockholders

   $ (3,799   $ 5,152   
  

 

 

   

 

 

 
    

Weighted average shares outstanding

     82,925        82,150   

Dilutive effect of performance-based stock units, restricted stock units and stock options

     —         692   
  

 

 

   

 

 

 

Diluted shares

     82,925        82,842   
  

 

 

   

 

 

 

(Loss) earnings per share attributable to TTM Technologies, Inc stockholders:

    

Basic

   $ (0.05   $ 0.06   
  

 

 

   

 

 

 

Diluted

   $ (0.05   $ 0.06   
  

 

 

   

 

 

 

For the quarter ended March 31, 2014, potential shares of common stock, consisting of stock options to purchase approximately 597 shares of common stock at exercise prices ranging from $5.78 to $16.82 per share, 1,769 restricted stock units, and 229 performance-based restricted stock units were not included in the computation of diluted earnings per share because the Company incurred a net loss and, as a result, the impact would be anti-dilutive.

For the quarter ended April 1, 2013, performance-based stock units, restricted stock units and stock options to purchase 2,508 shares of common stock, were not considered in calculating diluted earnings per share because the options’ exercise prices or the total expected proceeds under the treasury stock method for performance-based stock units, restricted stock units or stock options was greater than the average market price of common shares during the period and, therefore, the effect would be anti-dilutive.

Additionally, for the quarters ended March 31, 2014 and April 1, 2013, the effect of 27,970 and 10,963 shares of common stock, related to the Company’s convertible senior notes, respectively, and warrants to purchase 28,020 and 10,963 shares of common stock, respectively, were not included in the computation of dilutive earnings per share because the effect would be anti-dilutive.

(13) Stock-Based Compensation

Stock-based compensation expense is recognized in the accompanying consolidated condensed statements of operations as follows:

 

     Quarter Ended  
     March 31,
2014
    April 1,
2013
 
     (In thousands)  

Cost of goods sold

   $ 263      $ 303   

Selling and marketing

     335        362   

General and administrative

     1,570        1,665   
  

 

 

   

 

 

 

Stock-based compensation expense recognized

     2,168        2,330   

Income tax benefit recognized

     (570     (497
  

 

 

   

 

 

 

Total stock-based compensation expense after income taxes

   $ 1,598      $ 1,833   
  

 

 

   

 

 

 

 

15


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

Performance-based Restricted Stock Units

The Company maintains a long-term incentive program for executives that provides for the issuance of performance-based restricted stock units (PRUs), representing hypothetical shares of the Company’s common stock that may be issued. Under the PRU program, a target number of PRUs is awarded at the beginning of each three-year performance period. The number of shares of common stock released at the end of the performance period will range from zero to 2.4 times the target number depending on performance during the period. The performance metrics of the PRU program are based on (a) annual financial targets, which are based on revenue and EBITDA (earnings before interest, tax, depreciation, and amortization expense), each equally weighted, and (b) an overall modifier based on the Company’s total stockholder return (TSR) relative to the S&P SmallCap 600 for PRUs granted in 2012, and, for PRUs granted in 2013 and 2014, a group of peer companies selected by the Company’s compensation committee, over the three-year performance period.

The Company records stock-based compensation expense for PRU awards granted based on management’s periodic assessment of the probability of the PRU awards vesting. For the quarter ended March 31, 2014, management determined that vesting of the PRU awards was probable. PRUs activity for the quarter ended March 31, 2014 was as follows:

 

     Shares  
     (In thousands)  

Outstanding target shares at December 30, 2013

     353   

Granted:

  

Third tranche of 2012 grant

     59   

Second tranche of 2013 grant

     113   

First tranche of 2014 grant

     86   

Change in units due to annual performance achievement

     (10

Vested

     (90

Forfeitures / cancellations

     (34
  

 

 

 

Outstanding target shares at March 31, 2014

     477   
  

 

 

 

The fair value for PRUs granted is calculated using a Monte Carlo simulation model, as the TSR modifier contains a market condition. For the quarters ended March 31, 2014 and April 1, 2013, the following assumptions were used in determining the fair value:

 

     March  31,
20141
    April  1,
20132
 

Weighted-average fair value

   $ 5.80      $ 6.79   

Risk-free interest rate

     0.4     0.3

Dividend yield

     —         —    

Expected volatility

     41     49

Expected term in months

     23        25   

 

(1)

Reflects the weighted-averages for the third year of the three-year performance period applicable to PRUs granted in 2012, second year of the three-year performance period applicable to PRUs granted in 2013 and first year of the three-year performance period applicable to PRUs granted in 2014.

(2)

Reflects the weighted-averages for the third year of the three-year performance period applicable to PRUs granted in 2011, second year of the three-year performance period applicable to PRUs granted in 2012 and first year of the three-year performance period applicable to PRUs granted in 2013.

Restricted Stock Units

The Company granted 760 and 828 restricted stock units during the quarters ended March 31, 2014 and April 1, 2013, respectively. The units granted have a weighted-average fair value per unit of $8.00 and $8.27 for the quarters ended March 31, 2014 and April 1, 2013, respectively. The fair value for restricted stock units granted is based on the closing share price of the Company’s common stock on the date of grant.

Stock Options

The Company did not grant any stock option awards during the quarters ended March 31, 2014 and April 1, 2013.

 

16


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

Summary of Unrecognized Compensation Costs

The following is a summary of total unrecognized compensation costs as of March 31, 2014:

 

     Unrecognized
Stock-Based
Compensation Cost
     Remaining Weighted
Average
Recognition
Period
     (In thousands)      (years)

PRU awards

   $ 2,102       1.9

RSU awards

     10,866       1.6

Stock option awards

     52       0.4
  

 

 

    
   $ 13,020      
  

 

 

    

(14) Segment Information

The operating segments reported below are the Company’s segments for which separate financial information is available and upon which operating results are evaluated by the chief operating decision maker to assess performance and to allocate resources. The Company manages its worldwide operations based on two geographic operating segments: 1) Asia Pacific, which consists of five PCB fabrication plants and one drilling facility, and 2) North America, which consists of seven domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the PCB fabrication plants, and one backplane assembly plant in Shanghai, China, which is managed in conjunction with the Company’s U.S. operations. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for its customers and use similar means of product distribution.

The Company evaluates segment performance based on operating segment income, which is operating income before amortization of intangibles. Interest expense and interest income are not presented by segment since they are not included in the measure of segment profitability reviewed by the chief operating decision maker. All inter-segment transactions have been eliminated. Reportable segment assets exclude short-term investments, which are managed centrally.

 

     For the Quarter Ended  
     March 31, 2014     April 1, 2013  
     (In thousands)  

Net Sales:

    

Asia Pacific

   $ 165,666      $ 202,583   

North America

     126,589        123,589   
  

 

 

   

 

 

 

Total sales

     292,255        326,172   

Inter-segment sales

     (360     (780
  

 

 

   

 

 

 

Total net sales

   $ 291,895      $ 325,392   
  

 

 

   

 

 

 

Operating Segment Income:

    

Asia Pacific

   $ 3,867      $ 11,125   

North America

     2,822        3,857   
  

 

 

   

 

 

 

Total operating segment income

     6,689        14,982   

Amortization of definite-lived intangibles

     (2,236     (2,328
  

 

 

   

 

 

 

Total operating income

     4,453        12,654   

Total other expense

     (10,107     (5,277
  

 

 

   

 

 

 

(Loss) income before income taxes

   $ (5,654   $ 7,377   
  

 

 

   

 

 

 

The Company accounts for inter-segment sales and transfers as if the sale or transfer were to third parties: at arms length and consistent with the Company’s revenue recognition policy. The inter-segment sales for the quarter ended March 31, 2014 and April 1, 2013 are sales from the Asia Pacific operating segment to the North America operating segment.

 

17


Table of Contents

TTM TECHNOLOGIES, INC.

Notes to Consolidated Condensed Financial Statements – (Continued)

 

(15) Related Party Transactions

In the normal course of business, the Company’s foreign subsidiaries purchase laminate and prepreg from related parties in which a significant shareholder of the Company holds an equity interest. For the quarters ended March 31, 2014 and April 1, 2013, the Company’s foreign subsidiaries purchased $11,790 and $19,137 respectively, of laminate and prepreg from these related parties.

Dongguan Shengyi Electronics Ltd., (SYE) is a related party as a significant shareholder of the Company holds an equity interest in the parent company of SYE. Subsequent to the Company’s sale of its controlling interest in SYE in June 2013, the Company began selling PCBs to, and purchasing PCBs from, SYE. Sales to and purchases from SYE, for the quarter ended March 31, 2014 were approximately $10,147 and $271, respectively. There were no sales to or purchases from SYE for the quarter ended April 1, 2013.

As of March 31, 2014 and December 30, 2013, the Company’s consolidated condensed balance sheet included $19,882 and $19,547, respectively, in accounts payable due to, and $16,975 and $13,312, respectively, in accounts receivable due from a related party for the purchase of laminate and prepreg, and sales of PCBs to SYE, as mentioned above.

 

18


Table of Contents

Item 2. Management’s Discussion and Analysis of Financial Condition and Results of Operations

The following discussion of our financial condition and results of operations should be read in conjunction with our consolidated condensed financial statements and the related notes and the other financial information included in this Quarterly Report on Form 10-Q. This discussion and analysis contains forward-looking statements that involve risks and uncertainties. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of specified factors, including those set forth in Item 1A “Risk Factors” of Part II below and elsewhere in this Quarterly Report on Form 10-Q.

This discussion and analysis should be read in conjunction with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” set forth in our Annual Report on Form 10-K for the fiscal year ended December 30, 2013, filed with the SEC.

OVERVIEW AND RECENT DEVELOPMENTS

We are a leading global provider of time-critical and technologically complex printed circuit board (PCB) products and backplane assemblies (PCBs populated with electronic components), which serve as the foundation of sophisticated electronic products. We provide our customers time-to-market and advanced technology products and offer a one-stop manufacturing solution to customers from engineering support to prototype development through final volume production. We serve a diversified customer base in various markets throughout the world, including manufacturers of networking/communications infrastructure products, touch screen tablets, mobile media devices and smartphones. We also serve the aerospace and defense, high-end computing, and industrial/medical industries. Our customers include both original equipment manufacturers (OEMs) and electronic manufacturing services (EMS) providers.

Our Asia Pacific operating segment revenue experiences fluctuations, caused in part by seasonal patterns in the computer and cellular phone industries, which together have become a significant portion of the end markets we serve. This seasonality typically results in higher net sales in the third and fourth quarters due to end customer demand to meet fourth quarter sales of consumer electronics products.

In the normal course of operations, we are exposed to risks associated with fluctuations in foreign currency exchange rates. Specifically, we are subject to risks associated with transactions that are denominated in currencies other than our functional currencies. Our primary foreign exchange exposure is to the Chinese Renminbi (RMB). In the first quarter ended March 31, 2014, our consolidated condensed statement of operations includes an unrealized foreign exchange loss of approximately $3.6 million, due to the rapid depreciation of the RMB against the U.S. Dollar. We do not engage in hedging to manage foreign currency risk related to revenue and expenses denominated in RMB nor do we currently use derivative instruments to reduce exposure to foreign currency risk for loans due from our foreign subsidiaries.

Labor costs represent a significant portion of our total manufacturing costs. Our labor costs in the People’s Republic of China (PRC) have increased rapidly over the past number of years and as a result of mandated increases in the minimum wage and increased compensation offered to our labor force and due to the reduction of overtime hours that we implemented to meet standards required by some of our global customers. These increases in labor costs have reduced the gross and operating margins of our Asia Pacific operating segment. We believe annual labor rate increases together with increased pricing pressures from our principal customers and the reduction in our first quarter and second quarter operating leverage due to the seasonal nature of our business will occur each year for the foreseeable future and may further reduce gross and operating margins in our Asia Pacific operating segment.

While our customers include both OEMs and EMS providers, we measure customers based on OEM companies as they are the ultimate end customers. Sales to our 10 largest customers accounted for 53% and 51% of our net sales for the quarters ended March 31, 2014 and April 1, 2013, respectively. We sell to OEMs both directly and indirectly through EMS providers.

The following table shows the percentage of our net sales attributable to each of the principal end markets we serve for the periods indicated.

 

     Quarter Ended  

End Markets(1)

   March 31,
2014
    April 1,
2013
 

Aerospace/Defense

     17     16

Cellular Phone(2)

     15        17   

Computing/Storage/Peripherals(2)

     18        19   

Medical/Industrial/Instrumentation

     10        8   

Networking/Communications

     34        34   

Other(2)

     6        6   
  

 

 

   

 

 

 

Total

     100     100
  

 

 

   

 

 

 

 

(1)

Sales to EMS companies are classified by the end markets of their OEM customers.

(2)

Smartphones are included in the Cellular Phone end market, tablet PCs are included in the Computing/Storage/Peripherals end market and other mobile devices such as e-readers are included in the Other end market.

 

19


Table of Contents

For PCBs, we measure the time sensitivity of our products by tracking the quick-turn percentage of our work. We define quick-turn orders as those with delivery times of 10 days or less, which typically captures research and development, prototype, and new product introduction work, in addition to unexpected short-term production demand from our customers. Generally, we quote prices after we receive the design specifications and the time and volume requirements from our customers. Our quick-turn services command a premium price as compared to our standard lead-time products.

We also deliver product within compressed lead times of 11 to 20 days. We typically receive a premium price for this work as well. Purchase orders may be cancelled prior to shipment. We charge customers a fee, based on percentage completed, if an order is cancelled once it has entered production. We derive revenues primarily from the sale of PCBs and backplane assemblies using customer-supplied engineering and design plans. We recognize revenues when persuasive evidence of a sales arrangement exists, the sales terms are fixed or determinable, title and risk of loss have transferred, and collectability is reasonably assured — generally when products are shipped to the customer. Net sales consist of gross sales less an allowance for returns, which typically have been less than 3% of gross sales. We provide our customers a limited right of return for defective PCBs and backplane assemblies. We record an estimate for sales returns and allowances at the time of sale based on historical results.

Cost of goods sold consists of materials, labor, outside services, and overhead expenses incurred in the manufacture and testing of our products as well as stock-based compensation expense. Many factors affect our gross margin, including capacity utilization, product mix, product quality issues, production volume, and yield. We generally do not participate in any significant long-term contracts with suppliers, and we believe there are a number of potential suppliers for the raw materials we use.

Selling and marketing expenses consist primarily of salaries and commissions paid to our internal sales force and independent sales representatives, salaries paid to our sales support staff, stock-based compensation expense as well as costs associated with marketing materials and trade shows.

General and administrative costs primarily include the salaries for executive, finance, accounting, information technology, facilities and human resources personnel, as well as insurance expenses, expenses for accounting and legal assistance, incentive compensation expense, stock-based compensation expense, bad debt expense, gains or losses on the sale or disposal of property, plant and equipment, and acquisition-related expenses.

CRITICAL ACCOUNTING POLICIES AND ESTIMATES

Our consolidated condensed financial statements included in this report have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these financial statements requires management to make estimates and assumptions that affect the reported amounts of assets, liabilities, net sales and expenses, and related disclosure of contingent assets and liabilities.

See Item 7, Management’s Discussion and Analysis of Financial Condition and Results of Operation, in the Company’s Annual Report on Form 10-K for the fiscal year ended December 30, 2013 for further discussion of critical accounting policies and estimates. There were no material changes to our critical accounting policies and estimates since December 30, 2013.

 

20


Table of Contents

RESULTS OF OPERATIONS

The following table sets forth the relationship of various items to net sales in our consolidated condensed statement of operations:

 

     Quarter Ended  
     March 31, 2014     April 1, 2013  

Net sales

     100.0     100.0

Cost of goods sold

     86.8        84.4   
  

 

 

   

 

 

 

Gross profit

     13.2        15.6   
  

 

 

   

 

 

 

Operating expenses:

    

Selling and marketing

     3.2        2.8   

General and administrative

     7.7        8.2   

Amortization of definite-lived intangibles

     0.8        0.7   
  

 

 

   

 

 

 

Total operating expenses

     11.7        11.7   
  

 

 

   

 

 

 

Operating income

     1.5        3.9   

Other income (expense):

    

Interest expense

     (2.1     (1.9

Loss on extinguishment of debt

     (0.2       

Other, net

     (1.1     0.3   
  

 

 

   

 

 

 

Total other expense, net

     (3.4     (1.6
  

 

 

   

 

 

 

(Loss) Income before income taxes

     (1.9     2.3   

Income tax benefit (provision)

     0.6        (0.3
  

 

 

   

 

 

 

Net (loss) income

     (1.3     2.0   

Less: Net (income) loss attributable to noncontrolling interest

            (0.4
  

 

 

   

 

 

 

Net (loss) income attributable to TTM Technologies, Inc. stockholders

     (1.3 )%      1.6
  

 

 

   

 

 

 

We manage our worldwide operations based on two geographic operating segments: 1) Asia Pacific, which consists of five PCB fabrication plants and one drilling facility and 2) North America, which consists of seven domestic PCB fabrication plants, including a facility that provides follow-on value-added services primarily for one of the PCB fabrication plants, and one backplane assembly plant in Shanghai, China, which is managed in conjunction with our U.S. operations. Each segment operates predominantly in the same industry with production facilities that produce similar customized products for their customers and use similar means of product distribution.

The following table compares net sales by reportable segment for the quarters ended March 31, 2014 and April 1, 2013:

 

     Quarter Ended  
     March 31, 2014     April 1, 2013  
     (In thousands)  

Net Sales:

    

Asia Pacific

   $ 165,666      $ 202,583   

North America

     126,589        123,589   
  

 

 

   

 

 

 

Total sales

     292,255        326,172   

Inter-segment sales

     (360     (780
  

 

 

   

 

 

 

Total net sales

   $ 291,895      $ 325,392   
  

 

 

   

 

 

 

 

21


Table of Contents

Net Sales

Net sales decreased $33.5 million, or 10.3%, from $325.4 million for the first quarter of 2013 to $291.9 million for the first quarter of 2014.

Net sales for the Asia Pacific operating segment, excluding inter-segment sales, decreased $36.5 million, or 18.1%, from $201.8 million in the first quarter of 2013 to $165.3 million in the first quarter of 2014. This decrease is primarily due to the absence of net sales resulting from the sale of a controlling equity interest in a subsidiary in the second quarter of 2013 combined with lower demand in our Cellular Phone end market, which resulted in a 28% decrease in PCB shipments from the first quarter of 2013. This decrease in net sales was partially offset by a 13% increase in the average PCB selling price, which was driven by product mix shift.

Net sales for the North America operating segment increased $3.0 million, or 2.4%, from $123.6 million in the first quarter of 2013 to $126.6 million in the first quarter of 2014. This increase was primarily due to a 26% increase in demand for backplane assemblies for the Networking / Communications end market. This increase in net sales was partially offset by a 4% decrease in demand for PCB products, primarily in the Aerospace/Defense end market.

Gross Margin

Gross margin decreased from 15.6% for the first quarter of 2013 to 13.2% for the first quarter of 2014.

Gross margin for the Asia Pacific segment decreased from 15.6% for the first quarter of 2013 to 13.0% for the first quarter of 2014, primarily due to lower utilization and increased equipment related expenses at our advanced technology plants.

Gross margin for the North America segment decreased from 15.5% for the first quarter of 2013 to 13.5% for the first quarter of 2014, primarily due to a mix shift toward lower margin assembly products and lower cost absorption due to lower production volumes at certain PCB fabrication plants.

Selling and Marketing Expenses

Selling and marketing expenses increased $0.1 million, from $9.2 million for the first quarter of 2013 to $9.3 million for the first quarter of 2014. As a percentage of net sales, selling and marketing expenses were 2.8% for the first quarter of 2013 as compared to 3.2% for the first quarter of 2014. The increase in selling and marketing expense as a percentage of net sales is primarily due to lower net sales.

General and Administrative Expense

General and administrative expenses decreased $4.1 million from $26.6 million, or 8.2% of net sales, for the first quarter of 2013 to $22.5 million, or 7.7% of net sales, for the first quarter of 2014. The decrease in expense primarily relates to costs savings from the sale of a controlling equity interest in a subsidiary in the Asia Pacific operating segment, and lower incentive compensation expense.

Other Income (Expense)

Other expense, net increased $4.8 million from $5.3 million for the first quarter of 2013 to $10.1 million for the first quarter of 2014. The increase in other expense, net was primarily due to unrealized foreign currency transaction losses of $3.6 million due to the rapid depreciation of the Chinese RMB against the U.S. Dollar, and $0.5 million loss on the extinguishment of debt related to repurchase of a portion of convertible senior notes due 2015. For the quarter ended April 1, 2013, we had an unrealized foreign currency transaction gain of $0.8 million.

Income Taxes

The provision for income taxes decreased $2.7 million from a $0.8 million tax provision for the first quarter of 2013 to $1.9 million tax benefit for the first quarter of 2014. Our effective tax rate was 10.6% for the first quarter of 2013 and 32.8% for the first quarter of 2014. The decrease in our provision for income taxes is primarily due to a $1.5 million discrete tax benefit resulting from the retroactive approval of the high technology enterprise status for a subsidiary within the Asia Pacific operating segment. Our effective tax rate is primarily impacted by the U.S. federal income tax rate, apportioned state income tax rates, tax rates in China and Hong Kong, generation of other credits and deductions available to us, and certain non-deductible items. Certain foreign losses generated are not more than likely to be realizable, and thus no income tax benefit has been recognized on these losses. Additionally, as of March 31, 2014 and December 30, 2013, we had net deferred income tax assets of approximately $4.0 million and $5.4 million, respectively. Based on our forecast for future taxable earnings, we believe it is more likely than not that we will utilize the deferred income tax assets in future periods.

 

22


Table of Contents

Liquidity and Capital Resources

Our principal sources of liquidity have been cash provided by operations, the issuance of convertible senior notes, and term and revolving debt. Our principal uses of cash have been to refinance existing debt, finance capital expenditures, meet debt service requirements, fund working capital requirements and finance acquisitions. We anticipate that servicing debt, financing capital expenditures, funding working capital requirements, and financing acquisitions will continue to be the principal demands on our cash in the future.

As of March 31, 2014, we had net working capital of approximately $326.9 million compared to $347.0 million as of December 30, 2013.

As of March 31, 2014, we had cash and cash equivalents of approximately $318.0 million, of which approximately $96.7 million was held by our foreign subsidiaries. Of the cash and cash equivalents held by our foreign subsidiaries as of March 31, 2014, $93.0 million was located in Asia and $3.7 million was located in Europe. Cash and cash equivalents located in our Asia Pacific operating segment are expected to be used in local operations. Cash and cash equivalents located in our backplane assembly facility in Shanghai, China, as well as in Europe, totaled approximately $12.1 million which are managed in conjunction with our U.S. operations, are expected to be repatriated and will be subject to U.S. income tax.

Our 2014 capital expenditure plan is expected to total approximately $100.0 million (of which approximately $80.0 million relates to our Asia Pacific operating segment). The expenditures will fund capital equipment purchases to increase production capacity, especially for advanced technology manufacturing, comply with increased environmental regulations, replace aging equipment, and expand our technological capabilities.

Based on our current level of operations, we believe that cash generated from operations, cash on hand and cash available from borrowings under our existing credit arrangements will be adequate to meet our currently anticipated capital expenditure, debt service, working capital, and acquisition needs for the next 12 months. However, we may enter into new borrowing arrangements, if needed, to fund our business operations or to refinance existing debt.

Credit Agreement

We are party to a facility agreement (Credit Agreement) consisting of a $370.0 million senior secured Term Loan, a $90.0 million senior secured Revolving Loan and a secured $80.0 million Letters of Credit Facility. The Term Loan and Letters of Credit Facility will mature on September 14, 2016, and the Revolving Loan will mature on March 14, 2016. The Credit Agreement is secured by substantially all of the assets of our Asia Pacific operating segment and is senior to all of our other debt, including the convertible senior notes. We have fully and unconditionally guaranteed the full and punctual payment of all Credit Agreement related obligations of the Asia Pacific operating segment.

Borrowings under the Credit Agreement bear interest at a floating rate of LIBOR plus an interest margin of 2.38%. At March 31, 2014, the weighted average interest rate on the outstanding borrowings under the Credit Agreement was 2.53%.

Borrowings under the Credit Agreement are subject to certain financial and operating covenants that include maintaining maximum total leverage ratios and minimum net worth, current ratio, and interest coverage ratios for both us and our Asia Pacific operating segment. In addition, our Credit Agreement includes a covenant that the Principal Shareholders (as defined in the Shareholders Agreement dated April 9, 2010 as amended on September 14, 2012) will not reduce their shareholding below 15 percent of TTM’s issued shares. At March 31, 2014, we were in compliance with the covenants.

We are required to pay a commitment fee of 0.50% per annum on any unused portion of the loans and letters of credit facility granted under the Credit Agreement. We incurred $0.1 million for the quarter ended March 31, 2014 in commitment fees. As of March 31, 2014, the outstanding amount of the Term Loan was $321.9 million, of which $96.2 million is due for repayment in September 2014 and March 2015 and is included as short-term debt, with the remaining $225.7 million included as long-term debt. None of the Revolving Loan associated with the Credit Agreement was outstanding at March 31, 2014. Available borrowing capacity under the Revolving Loan was $90.0 million as of March 31, 2014.

We have an $80.0 million Letters of Credit Facility under the Credit Agreement. As of March 31, 2014, letters of credit in the amount of $57.0 million were outstanding under our Credit Agreement. We have other standby letters of credit outstanding in the amount of $3.4 million, as well as other unused letter of credit facilities in the amount of $31.1 million. The outstanding standby letters of credit and unused letter of credit facilities expire between December 31, 2014 and February 28, 2015.

We are party to a revolving loan credit facility with a lender in the PRC. Under this arrangement, the lender has made available to us approximately $46.7 million in unsecured borrowing with all terms of the borrowing to be negotiated at the time the revolver is drawn upon. There are no commitment fees on the unused portion of the revolver and this arrangement expires in December 2014. As of March 31, 2014, the revolver had not been drawn upon.

 

23


Table of Contents

Convertible Senior Notes due 2020

On December 20, 2013, we issued 1.75% convertible senior notes due December 15, 2020, in a public offering for an aggregate principal amount of $220.0 million. The convertible senior notes bear interest at a rate of 1.75% per annum. Interest is payable semiannually in arrears on June 15 and December 15 of each year. The convertible senior notes are senior unsecured obligations and rank equally to our future unsecured senior indebtedness and senior in right of payment to any of our future subordinated indebtedness. Offering expenses are being amortized to interest expense over the term of the convertible senior notes.

During the quarter ended March 31, 2014, we closed the sale of an additional $30.0 million aggregate principal amount of our 1.75% convertible senior notes due 2020 (Additional Notes). The Additional Notes were sold pursuant to the exercise of an over-allotment option granted by us in the underwriting agreement related to the offer and sale of $220.0 million aggregate principal amount of our 1.75% convertible senior notes due 2020. In connection with the offering of the Additional Notes, we entered into additional convertible note hedge transactions with respect to shares of our common stock. The additional purchased call options cover up to approximately 3.1 million shares of common stock, at a strike price of $9.64 and will expire upon the maturity of the notes. Additionally, we also entered into additional warrant transactions, whereby we sold warrants to acquire up to approximately 3.1 million shares of common stock at a strike price of $14.26.

Convertible Senior Notes due 2015

In May 2008, we issued $175.0 million of convertible senior notes. The convertible senior notes bear interest at a rate of 3.25% per annum. Interest is payable semiannually in arrears on May 15 and November 15 of each year. The convertible senior notes are senior unsecured obligations and rank equally to our future unsecured senior indebtedness and senior in right of payment to any of our future subordinated indebtedness. Offering expenses are being amortized to interest expense over the term of the convertible senior notes.

During the quarter ended March 31, 2014, we repurchased $6.5 million principal amount of notes at approximately 103.4% of their principal amount. This repurchase was also accounted for as an extinguishment of debt and, accordingly, we recognized a loss of approximately $0.5 million, primarily associated with the premium paid to repurchase the convertible senior notes and the recognition of certain remaining unamortized debt discount and issuance costs.

Contractual Obligations and Commitments

The following table provides information on our contractual obligations as of March 31, 2014:

 

     Total      Less Than
1 Year
     1 - 3 Years      4 - 5 Years      After
5 Years
 
     (In thousands)  

Contractual Obligations(1)

      

Long-term debt obligations

   $ 321,907       $ 96,205       $ 225,702       $      $  

Convertible debt obligations

     282,395                32,395                250,000   

Interest on debt obligations

     46,281         12,888         15,893         8,750         8,750   

Foreign currency forward contract liabilities

     2,028         1,216         812                 

Equipment payables

     65,642         53,628         12,014                 

Purchase obligations

     25,249         22,416         2,833                 

Operating lease commitments

     6,757         2,663         2,703         1,094         297   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

Total contractual obligations

   $ 750,259       $ 189,016       $ 292,352       $ 9,844       $ 259,047   
  

 

 

    

 

 

    

 

 

    

 

 

    

 

 

 

 

(1)

Unrecognized uncertain tax benefits of $2.7 million are not included in the table above as we have not determined when the amount will be paid.

Off Balance Sheet Arrangements

We do not currently have, nor have we ever had, any relationships with unconsolidated entities or financial partnerships, such as entities often referred to as structured finance or special purpose entities, which would have been established for the purpose of facilitating off-balance sheet arrangements or other contractually narrow or limited purposes. In addition, we do not engage in trading activities involving non-exchange traded contracts. As a result, we are not materially exposed to any financing, liquidity, market, or credit risk that could arise if we had engaged in these relationships.

 

24


Table of Contents

Seasonality

As a result of the product and customer mix of our Asia Pacific operating segment, our revenue is subject to seasonal fluctuations. These fluctuations include seasonal patterns in the computer and cellular phone industries, which together have become a significant portion of the end markets we serve. This seasonality typically results in higher net sales in the third and fourth quarters due to end customer demand to meet fourth quarter sales of consumer electronics products. Seasonal fluctuations also include the Chinese New Year holidays in the first quarter, which typically results in lower net sales.

Recently Issued Accounting Standards

In July 2013, the Financial Accounting Standards Board (FASB) issued an update that would require an unrecognized tax benefit, or a portion of an unrecognized benefit, to be presented in the financial statements as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax loss, or a tax credit carryforward. This update is effective for interim and annual periods beginning after December 15, 2013, with early adoption permitted. We adopted the amendment on January 1, 2014, and our adoption did not have a material impact on our financial statements.

Item 3. Quantitative and Qualitative Disclosures About Market Risk

In the normal course of business operations we are exposed to risks associated with fluctuations in interest rates and foreign currency exchange rates. We address these risks through controlled risk management that includes the use of derivative financial instruments to economically hedge or reduce these exposures. We do not enter into derivative financial instruments for trading or speculative purposes.

We have not experienced any losses to date on any derivative financial instruments due to counterparty credit risk.

To ensure the adequacy and effectiveness of our foreign exchange hedge positions, we continually monitor our foreign exchange forward positions, both on a stand-alone basis and in conjunction with their underlying foreign currency exposures, from an accounting and economic perspective. However, given the inherent limitations of forecasting and the anticipatory nature of the exposures intended to be hedged, we cannot assure that such programs will offset more than a portion of the adverse financial impact resulting from unfavorable movements in foreign exchange rates. In addition, the timing of the accounting for recognition of gains and losses related to mark-to-market instruments for any given period may not coincide with the timing of gains and losses related to the underlying economic exposures and, therefore, may adversely affect our consolidated operating results and financial position.

See Item 7A, Quantitative and Qualitative Disclosures About Market Risk, in the Company’s Annual Report on Form 10-K for the year ended December 30, 2013 for further discussion of market risks associated with interest rates. Our exposure to interest rate risks has not changed materially since December 30, 2013.

Foreign Currency Risks

We are subject to risks associated with transactions that are denominated in currencies other than our functional currencies, as well as the effects of translating amounts denominated in a foreign currency to the U.S. Dollar as a normal part of the reporting process. Our Asia Pacific operations utilize the RMB and the Hong Kong Dollar (HKD) as the functional currencies, which results in us recording a translation adjustment that is included as a component of accumulated other comprehensive income. Our foreign exchange exposure results primarily from employee-related and other costs of running operations in foreign countries, foreign currency denominated purchases and translation of balance sheet accounts denominated in foreign currencies. Our primary foreign exchange exposure is to the RMB. In the quarter ended March 31, 2014, our consolidated condensed statement of operations includes an unrealized foreign exchange loss of approximately $3.6 million, due to the rapid depreciation of the RMB against the U.S. Dollar. We do not engage in hedging to manage foreign currency risk related to revenue and expenses denominated in RMB and HKD nor do we currently use derivative instruments to reduce exposure to foreign currency risk for loans due from our foreign subsidiaries. However, we may consider the use of derivatives in the future. In general, our PRC customers pay us in RMB, which partially mitigates this foreign currency exchange risk.

We enter into foreign currency forward contracts to mitigate the impact of changes in foreign currency exchange rates and to reduce the volatility of purchases and other obligations generated in currencies other than the functional currencies. Our foreign subsidiaries may at times purchase forward exchange contracts to manage their foreign currency risks in relation to certain purchases of machinery denominated in foreign currencies other than our foreign functional currency. The notional amount of the foreign exchange contracts as of March 31, 2014 and December 30, 2013 was approximately $40.0 million and $47.0 million, respectively. We have designated certain of these foreign exchange contracts as cash flow hedges.

See Liquidity and Capital Resources and Credit Agreement appearing in Item 2 of this Form 10-Q for further discussion of our financing facilities and capital structure. As of March 31, 2014, approximately 46.7% of our total debt was based on fixed rates. Based on our borrowings as of March 31, 2014, an assumed 100 basis point change in variable rates would cause our annual interest cost to change by $3.2 million.

 

25


Table of Contents

Item 4. Controls and Procedures

Evaluation of Disclosure Controls and Procedures

Our management, under the supervision and with the participation of our Chief Executive Officer (“CEO”) and Chief Financial Officer (“CFO”), has evaluated the effectiveness of the design and operation of our disclosure controls and procedures (as defined in Exchange Act Rules 13a-15(e) and 15d-15(e)) as of the end of the period covered by this Report. Based on this evaluation, our CEO and CFO have concluded that, as of March 31, 2014, such disclosure controls and procedures were effective to provide reasonable assurance that information we are required to disclose in reports that we file or submit under the Exchange Act is (i) recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and (ii) accumulated and communicated to our management, including our CEO and CFO, as appropriate to allow timely decisions regarding required disclosures.

Changes in Internal Control Over Financial Reporting

There were no changes in our internal control over financial reporting (as defined in Rules 13a-15(f) and 15d-15(f) under the Exchange Act) during the quarter ended March 31, 2014 that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

Inherent Limitations on Effectiveness of Controls

A control system, no matter how well designed and operated, can provide only reasonable, not absolute, assurance that the control system’s objectives will be met. The design of a control system must reflect the fact that there are resource constraints, and the benefits of controls must be considered relative to their costs. Further, because of the inherent limitations, internal control over financial reporting may not prevent or detect misstatements due to error or fraud. These inherent limitations include the realities that judgments in decision-making can be faulty and that breakdowns can occur because of simple error or mistake. Controls also can be circumvented by the individual acts of some persons, by collusion of two or more people, or by management override of the controls. The design of any system of controls is based in part on certain assumptions about the likelihood of future events, and there can be no assurance that any design will succeed in achieving its stated goals under all potential future conditions. Projections of any evaluation of controls effectiveness to future periods are subject to risks that controls may become inadequate because of changes in conditions, or that the degree of compliance with policies or procedures may deteriorate.

PART II. OTHER INFORMATION

Item 1. Legal Proceedings

From time to time, we may become a party to various legal proceedings arising in the ordinary course of our business. There can be no assurance that we will prevail in any such litigation. We believe that the amount of any reasonably possible or probable loss for known matters would not be material to our financial statements; however, the outcome of these actions is inherently difficult to predict. In the event of an adverse outcome, the ultimate potential loss could have a material adverse effect on our financial condition or results of operations or cash flows in a particular period.

Item 1A. Risk Factors

An investment in our common stock involves a high degree of risk. You should carefully consider the factors described below, in addition to those discussed elsewhere in this report, in analyzing an investment in our common stock. If any of the events described below occurs, our business, financial condition, and results of operations would likely suffer, the trading price of our common stock could fall, and you could lose all or part of the money you paid for our common stock. The risk factors described below are not the only ones we face. Risks and uncertainties not known to us currently, or that may appear immaterial, also may have a material adverse effect on our business, financial condition, and results of operations.

In addition, the following risk factors and uncertainties could cause our actual results to differ materially from those projected in our forward-looking statements, whether made in this report or the other documents we file with the SEC, or our annual or quarterly reports to stockholders, future press releases, or orally, whether in presentations, responses to questions, or otherwise.

We are subject to risks of currency fluctuations.

A portion of our cash and other current assets is held in currencies other than the U.S. dollar. As of March 31, 2014, we had an aggregate of approximately $186 million in current assets denominated in Chinese RMB and the Hong Kong Dollar (HKD). Changes in exchange rates among other currencies and the U.S. dollar will affect the value of these assets as translated to U.S. dollars in our balance sheet. To the extent that we ultimately decide to repatriate some portion of these funds to the United States, the actual value transferred could be impacted by movements in exchange rates. Any such type of movement could negatively impact the amount of cash available to fund operations or to repay debt. Significant inflation or disproportionate changes in foreign exchange rates could

 

26


Table of Contents

occur as a result of general economic conditions, acts of war or terrorism, changes in governmental monetary or tax policy, or changes in local interest rates. The impact of future exchange rate fluctuations between the U.S. Dollar and the RMB and the U.S. Dollar and the HKD cannot be predicted. To the extent that we may have outstanding indebtedness denominated in the U.S Dollar or in the HKD, the depreciation of the RMB against the U.S. Dollar or the HKD, will have an adverse impact on our financial condition and results of operations (including the cost of servicing, and the value in our balance sheet of, the U.S Dollar and HKD-denominated indebtedness). Further, China’s government imposes controls over the convertibility of RMB into foreign currencies, which subjects us to further currency exchange risk.

Products we manufacture may contain design or manufacturing defects, which could result in reduced demand for our services and liability claims against us.

We manufacture products to our customers’ specifications, which are highly complex and may contain design or manufacturing errors or failures, despite our quality control and quality assurance efforts. Defects in the products we manufacture, whether caused by a design, manufacturing, or materials failure or error, may result in delayed shipments, customer dissatisfaction, a reduction or cancellation of purchase orders, or liability claims against us. If these defects occur either in large quantities or too frequently, our business reputation may be impaired. Since our products are used in products that are integral to our customers’ businesses, errors, defects, or other performance problems could result in financial or other damages to our customers beyond the cost of the PCB, for which we may be liable. Although our invoices and sales arrangements generally contain provisions designed to limit our exposure to product liability and related claims, existing or future laws or unfavorable judicial decisions could negate these limitation of liability provisions. Product liability litigation against us, even if it were unsuccessful, would be time consuming and costly to defend. Although we maintain technology errors and omissions insurance, we cannot assure investors that we will continue to be able to purchase such insurance coverage in the future on terms that are satisfactory to us, if at all, or that insurance will cover the specific defect issues that arise.

We are heavily dependent upon the worldwide electronics industry, which is characterized by economic cycles and fluctuations in product demand. A downturn in the electronics industry or prolonged global economic crisis could result in decreased demand for our manufacturing services and materially impact our financial condition.

A majority of our revenue is generated from the electronics industry, which is characterized by intense competition, relatively short product life cycles, and significant fluctuations in product demand. The industry is subject to economic cycles and recessionary periods. Due to the uncertainty in the end markets served by most of our customers, we have a low level of visibility with respect to future financial results. Consequently, our past operating results, earnings and cash flows may not be indicative of our future operating results, earnings and cash flows.

We depend upon a relatively small number of OEM customers for a large portion of our sales, and a decline in sales to major customers could harm our results of operations.

A small number of customers are responsible for a significant portion of our sales. Collectively, our five largest OEM customers accounted for approximately 39% and 35% of our net sales for the quarters ended March 31, 2014 and April 1, 2013, respectively, and one customer represented 16% and 14% of our sales in the quarters ended in March 31, 2014 and April 1, 2013, respectively. Sales attributed to OEMs include both direct sales as well as sales that the OEMs place through EMS providers. Our customer concentration could fluctuate, depending on future customer requirements, which will depend in large part on market conditions in the electronics industry segments in which our customers participate. The loss of one or more significant customers or a decline in sales to our significant customers could harm our business, results of operations, and financial condition and lead to declines in the trading price of our common stock. In addition, we generate significant accounts receivable in connection with providing manufacturing services to our customers. If one or more of our significant customers were to become insolvent or were otherwise unable to pay for the manufacturing services provided by us, our results of operations would be harmed.

In addition, during industry downturns, we may need to reduce prices at customer requests to limit the level of order losses, and we may be unable to collect payments from our customers. There can be no assurance that key customers would not cancel orders, that they would continue to place orders with us in the future at the same levels as experienced by us in prior periods, that they would be able to meet their payment obligations, or that the end-products which use our products would be successful. This concentration of customer base may materially and adversely affect our operating results due to the loss or cancellation of business from any of these key customers, significant changes in scheduled deliveries to any of these customers, or decreases in the prices of the products sold to any of these customers.

 

27


Table of Contents

The Chinese member firm of the KPMG network, of which our independent registered public accounting firm is also a member, may be temporarily suspended from practicing before the SEC. If a delay in completion of our audit process occurs as a result, we could be unable to timely file certain reports with the SEC, which could cause a default under our Credit Agreement or our Convertible Senior Notes and may result in acceleration of significant amounts of indebtedness.

In the quarter ended March 31, 2014, approximately 57% of our total net sales were generated from our significant operations in the People’s Republic of China. Certain of our independent registered public accounting firm’s audit documentation related to their audit as of and for the fiscal year ending December 29, 2014 may be located in China, and certain audit procedures may take place within China’s borders.

On January 22, 2014 an SEC administrative law judge issued an initial decision suspending the Chinese member firms of the “Big Four” accounting firms, among others, from practicing before the SEC for six months as a result of their failure to provide certain documents to the SEC because to do so would violate Chinese law. The decision is not yet effective and will only become effective when and if the SEC endorses it. If the decision goes into effect, the work of our auditors with respect to our Chinese operations could be delayed.

A delay in completion of the audit process could delay the timely filing of our quarterly or annual reports with the SEC. A significant delay in completion of our regular audits could delay provision of financial statements required under our Credit Agreement. Failure to comply with the deadlines for providing such financial statements could result in a default under our Credit Agreement, which would trigger a cross-default under the terms of our Convertible Senior Notes, rendering all such indebtedness immediately due and payable. A delinquency in our filings with the SEC may also result in NASDAQ initiating delisting procedures. Delisting of our stock would also trigger a default under our Credit Agreement and may require us to repurchase our Convertible Senior Notes. The occurrence of any of these events could have a material adverse effect on our results of operation and financial condition.

If we are unable to maintain satisfactory capacity utilization rates, our results of operations and financial condition would be adversely affected.

Given the high fixed costs of our operations, decreases in capacity utilization rates can have a significant effect on our business. Accordingly, our ability to maintain or enhance gross margins would continue to depend, in part, on maintaining satisfactory capacity utilization rates. In turn, our ability to maintain satisfactory capacity utilization would depend on the demand for our products, the volume of orders we receive, and our ability to offer products that meet our customers’ requirements at competitive prices. If current or future production capacity fails to match current or future customer demands, our facilities would be underutilized, our sales may not fully cover our fixed overhead expenses, and we would be less likely to achieve expected gross margins. If forecasts and assumptions used to support the realizability of our long-lived assets change in the future, significant impairment charges could result that would adversely affect our results of operations and financial condition.

In addition, we generally schedule our quick turnaround production facilities at less than full capacity to retain our ability to respond to unexpected additional quick-turn orders. However, if these orders are not received, we may forego some production and could experience continued excess capacity. If we conclude we have significant, long-term excess capacity, we may decide to permanently close one or more of our facilities and lay off some of our employees. Closures or lay-offs could result in our recording restructuring charges such as severance, other exit costs, and asset impairments as well as potentially causing disruptions in our ability to supply customers.

Our results of operations are often subject to demand fluctuations and seasonality. With a high level of fixed operating costs, even small revenue shortfalls would decrease our gross margins and potentially cause the trading price of our common stock to decline.

Our results of operations fluctuate for a variety of reasons, including:

 

   

timing of orders from and shipments to major customers;

   

the levels at which we utilize our manufacturing capacity;

   

price competition;

   

changes in our mix of revenues generated from quick-turn versus standard delivery time services;

   

expenditures, charges or write-offs, including those related to acquisitions, facility restructurings, or asset impairments; and

   

expenses relating to expanding existing manufacturing facilities.

 

28


Table of Contents

A significant portion of our operating expenses is relatively fixed in nature, and planned expenditures are based in part on anticipated orders. Accordingly, unexpected revenue shortfalls may decrease our gross margins. In addition, we have experienced sales fluctuations due to seasonal patterns in the capital budgeting and purchasing cycles, as well as inventory management practices of our customers and the end markets we serve. In particular, the seasonality of the computer and cellular phone industries and quick-turn ordering patterns affect the overall PCB industry. These seasonal trends have caused fluctuations in our operating results in the past and may continue to do so in the future. Results of operations in any period should not be considered indicative of the results to be expected for any future period. In addition, our future quarterly operating results may fluctuate and may not meet the expectations of securities analysts or investors. If this occurs, the trading price of our common stock likely would decline.

Covenants in our credit agreement may adversely affect our company.

On September 14, 2012, we became a party to a Credit Agreement. The Credit Agreement contains certain financial and operating covenants that include, among other provisions, limitations on dividends or other distributions, maintaining maximum total leverage ratios and minimum net worth, current assets, and interest coverage ratios at both the Company and the Asia Pacific operating segment level. In addition, our Credit Agreement includes a covenant that the Principal Shareholders (as defined in the Shareholders Agreement dated April 9, 2010 as amended on September 14, 2012) will not reduce their shareholding below 15% of TTM’s issued shares. Our ability to meet the financial covenants can be affected by events beyond our control, and we cannot provide assurance that we will continue to comply with all of these financial covenants. A breach of any of these covenants could result in a default under the Credit Agreement. Upon the occurrence of an event of default under the Credit Agreement, the lenders could elect to declare amounts outstanding there under to be immediately due and payable and terminate all commitments to extend further credit. If the lenders accelerate the repayment of borrowings, we may not have sufficient assets to repay the indebtedness owed under the Credit Agreement and our other indebtedness. See “Item 2 — Management’s Discussion and Analysis of Financial Condition and Results of Operations — Liquidity and Capital Resources — Credit Agreement.”

Our results can be adversely affected by rising labor costs.

There is uncertainty with respect to rising labor costs, in particular within China, where we have most of our manufacturing facilities. In recent periods there have been regular and significant increases in the minimum wage payable in various provinces of China. In addition, we have experienced very high employee turnover in our manufacturing facilities in China, and we are experiencing ongoing difficulty in recruiting employees for these facilities. Furthermore, labor disputes and strikes based partly on wages have in the past slowed or stopped production by certain manufacturers in China. In some cases, employers have responded by significantly increasing the wages of workers at such plants. Any increase in labor costs due to minimum wage laws or customer requirements about scheduling and overtime that we are unable to recover in our pricing to our customers could adversely impact our operating results. In addition, the high turnover rate and our difficulty in recruiting and retaining qualified employees and the other labor trends we are noting in China could result in production disruptions or delays or the inability to ramp production to meet increased customer orders, resulting in order cancellation or imposition of customer penalties if we are unable to timely deliver products.

To respond to competitive pressures and customer requirements, we may further expand internationally in lower cost locations. If we pursue such expansions, we may be required to make additional capital expenditures. In addition, the cost structure in certain countries that are now considered to be favorable may increase as economies develop or as such countries join multinational economic communities or organizations, causing local wages to rise. As a result, we may need to continue to seek new locations with lower-costs and the employee and infrastructure base to support PCB manufacturing. We cannot assure investors that we will realize the anticipated strategic benefits of our international operations or that our international operations will contribute positively to our operating results.

In our North America operating segment, rising health care costs pose a significant labor-related risk. We work with our insurance brokers and carriers to control the cost of health care for our employees. However, there can be no assurance that our efforts will succeed, especially given recent and pending changes in government oversight of health care.

 

29


Table of Contents

We serve customers and have manufacturing facilities outside the United States and are subject to the risks characteristic of international operations.

We have significant manufacturing operations in Asia and sales offices located in Asia and Europe, and we continue to consider additional opportunities to make foreign investments and construct new foreign facilities. For the quarter ended March 31, 2014, we generated 57% of our net sales from non-U.S. operations, and a significant portion of our manufacturing material was provided by international suppliers during this period. As a result, we are subject to risks relating to significant international operations, including but not limited to:

 

   

managing international operations;

   

imposition of governmental controls;

   

unstable regulatory environments;

   

compliance with employment laws;

   

implementation of disclosure controls, internal controls, financial reporting systems, and governance standards to comply with U.S. accounting and securities laws and regulations;

   

limitations on imports or exports of our product offerings;

   

fluctuations in the value of local currencies;

   

inflation or changes in political and economic conditions;

   

labor unrest, rising wages, difficulties in staffing and geographical labor shortages;

   

government or political unrest;

   

longer payment cycles;

   

language and communication barriers as well as time zone differences;

   

cultural differences;

   

increases in duties and taxation levied on our products;

   

other potentially adverse tax consequences;

   

imposition of restrictions on currency conversion or the transfer of funds;

   

travel restrictions;

   

expropriation of private enterprises; and

   

the potential reversal of current favorable policies encouraging foreign investment and trade.

Our operations in China subject us to risks and uncertainties relating to the laws and regulations of China.

Under its current leadership, the government of China has been pursuing economic reform policies, including the encouragement of foreign trade and investment and greater economic decentralization. No assurance can be given, however, that the government of China will continue to pursue such policies, that such policies will be successful if pursued, or that such policies will not be significantly altered from time to time. Despite progress in developing its legal system, China does not have a comprehensive and highly developed system of laws, particularly with respect to foreign investment activities and foreign trade. Enforcement of existing and future laws and contracts is uncertain, and implementation and interpretation thereof may be inconsistent. As the Chinese legal system develops, the promulgation of new laws, changes to existing laws and the preemption of local regulations by national laws may adversely affect foreign investors. Further, any litigation in China may be protracted and may result in substantial costs and diversion of resources and management attention. In addition, though changes in government policies and rules are timely published or communicated, there is no indication of the duration of any grace period before which full implementation and compliance will be required. As a result, we may operate our business in violation of new rules and policies before full compliance can be achieved. These uncertainties could limit the legal protections available to us.

 

30


Table of Contents

We depend on the U.S. government for a substantial portion of our business, which involves unique risks. Changes in government defense spending or regulations could have a material adverse effect on our business.

A significant portion of our revenues is derived from products and services ultimately sold to the U.S. government by our OEM and EMS customers and is therefore affected by, among other things, the federal budget process. We are a supplier, primarily as a subcontractor, to the U.S. government and its agencies as well as foreign governments and agencies. The contracts between our direct customers and the government end user are subject to political and budgetary constraints and processes, changes in short-range and long-range strategic plans, the timing of contract awards, the congressional budget authorization and appropriation processes, the government’s ability to terminate contracts for convenience or for default, as well as other risks, such as contractor suspension or debarment in the event of certain violations of legal and regulatory requirements.

For the quarter ended March 31, 2014, aerospace and defense sales accounted for approximately 17% of our total net sales. The substantial majority of these sales are related to both U.S. and foreign military and defense programs. While we do not sell any significant volume of products directly to the U.S. government, we are a supplier to the U.S. government and its agencies as well as foreign governments and agencies. Consequently, our sales are affected by changes in the defense budgets of the U.S. and foreign governments. The domestic and international threat of terrorist activity, emerging nuclear states and conventional military threats have led to an increase in demand for defense products and services and homeland security solutions in the recent past. The U.S. government, however, is facing unprecedented budgeting constraints and the U.S. defense budget is currently declining as a result of budgetary pressures and the wind down of the conflicts in Iraq and Afghanistan. The termination or failure to fund one or more significant contracts by the U.S. government could have a material adverse effect on our business, financial condition or results of operations.

Additionally, the federal government is currently in the process of reviewing and revising the United States Munitions List. Such changes could reduce or eliminate restrictions that currently apply to some of the products we produce. If these regulations or others are changed in a manner that reduces restrictions on products being manufactured overseas, we would likely face an increase in the number of competitors and increased price competition from overseas manufacturers, who are restricted by the current export laws from manufacturing products for U.S. defense systems.

Competition in the PCB market is intense, and we could lose market share if we are unable to maintain our current competitive position in end markets using our quick-turn, high technology and high-mix manufacturing services.

The PCB industry is intensely competitive, highly fragmented, and rapidly changing. We expect competition to continue, which could result in price reductions, reduced gross margins, and loss of market share. Our principal PCB and substrate competitors include Unimicron, Ibiden, Compeq, Tripod, Isupetasys, Viasystems, Sanmina, Multek, Wus and Zhen Ding. Our principal backplane assembly competitors include Amphenol, Sanmina, Simclar, TT Electronics, and Viasystems. In addition, we increasingly compete on an international basis, and new and emerging technologies may result in new competitors entering our markets.

Some of our competitors and potential competitors have advantages over us, including:

 

   

greater financial and manufacturing resources that can be devoted to the development, production, and sale of their products;

   

more established and broader sales and marketing channels;

   

more manufacturing facilities worldwide, some of which are closer in proximity to OEMs;

   

manufacturing facilities that are located in countries with lower production costs;

   

lower capacity utilization, which in peak market conditions can result in shorter lead times to customers;

   

ability to add additional capacity faster or more efficiently;

   

preferred vendor status with existing and potential customers;

   

greater name recognition; and

   

larger customer bases.

In addition, these competitors may respond more quickly to new or emerging technologies, or adapt more quickly to changes in customer requirements, and devote greater resources to the development, promotion, and sale of their products than we do. We must continually develop improved manufacturing processes to meet our customers’ needs for complex products, and our manufacturing process technology is generally not subject to significant proprietary protection. During recessionary periods in the electronics industry, our strategy of providing quick-turn services, an integrated manufacturing solution, and responsive customer service may take on reduced importance to our customers. As a result, we may need to compete more on the basis of price, which could cause our gross margins to decline.

 

31


Table of Contents

An increase in the cost of raw materials could have an adverse impact on our business and reduce our gross margins.

To manufacture PCBs, we use raw materials such as laminated layers of fiberglass, copper foil, chemical solutions, gold, and other commodity products, which we order from our suppliers. In the case of backplane assemblies, components include connectors, sheet metal, capacitors, resistors and diodes, many of which are custom made and controlled by our customers’ approved vendors. If raw material and component prices increase, it may reduce our gross margins.

If we are unable to provide our customers with high-end technology, high quality products, and responsive service, or if we are unable to deliver our products to our customers in a timely manner, our results of operations and financial condition may suffer.

In order to maintain our existing customer base and obtain business from new customers, we must demonstrate our ability to produce our products at the level of technology, quality, responsiveness of service, timeliness of delivery, and cost that our customers require. If our products are of substandard quality, if they are not delivered on time, if we are not responsive to our customers’ demands, or if we cannot meet our customers’ technological requirements, our reputation as a reliable supplier of our products would likely be damaged. If we are unable to meet these product and service standards, we may be unable to obtain new contracts or keep our existing customers, and this could have a material adverse effect on our results of operations and financial condition.

We are subject to risks for the use of certain metals from “conflict minerals” originating in the Democratic Republic of the Congo.

During the third quarter of 2012, the SEC adopted rules implementing the Dodd-Frank Wall Street Reform and Consumer Protection Act, or Dodd-Frank. These rules impose diligence and disclosure requirements regarding the use of “conflict minerals” mined from the Democratic Republic of Congo and adjoining countries as required by Dodd-Frank. Compliance with these rules is likely to result in additional costs and expenses, including costs and expenses incurred for due diligence to determine and verify the sources of any conflict minerals used in our products, in addition to the costs and expenses of remediation and other changes to products, processes, or sources of supply as a consequence of such verification efforts. These rules may also affect the sourcing and availability of minerals used in the manufacture of our semiconductor devices as there may be only a limited number of suppliers offering “conflict free” minerals that can be used in our products. There can be no assurance that we will be able to obtain such minerals in sufficient quantities or at competitive prices. Also, since our supply chain is complex, we may, at a minimum, face reputational challenges with our customers, stockholders and other stakeholders if we are unable to sufficiently verify the origins of the minerals used in our products. We may also encounter customers who require that all of the components of our products be certified as conflict free. If we are not able to meet customer requirements, such customers may choose to disqualify us as a supplier, which could impact our sales and the value of portions of our inventory.

Unanticipated changes in our tax rates or in our assessment of the realizability of our deferred income tax assets or exposure to additional income tax liabilities could affect our operating results and financial condition.

We are subject to income taxes in the United States and various foreign jurisdictions. Significant judgment is required in determining our provision for income taxes and, in the ordinary course of business, there are many transactions and calculations in which the ultimate tax determination is uncertain. Our effective tax rates could be adversely affected by changes in the mix of earnings in countries and states with differing statutory tax rates, changes in the valuation of deferred income tax assets and liabilities, changes in tax laws, as well as other factors. Our tax determinations are regularly subject to audit by tax authorities, and developments in those audits could adversely affect our income tax provision. Although we believe that our tax estimates are reasonable, the final determination of tax audits or tax disputes may be different from what is reflected in our historical income tax provisions, which could affect our operating results and financial condition.

If our net earnings do not remain at or above recent levels, or we are not able to predict with a reasonable degree of probability that they will continue, we may have to record a valuation allowance against our net deferred income tax assets.

As of March 31, 2014, we had net deferred income tax assets of approximately $4.0 million. Based on our forecast for future taxable earnings, we believe we will utilize the deferred income tax assets in future periods. However, if our estimates of future earnings decline, we may have to increase our valuation allowance against our net deferred income tax assets, resulting in a higher income tax provision, which would reduce our earnings per share. Additionally, the ability to utilize deferred income tax assets is dependent upon the generation of taxable income in the specific tax jurisdictions that have deferred income tax assets.

 

32


Table of Contents

If events or circumstances occur in our business that indicate that our goodwill and definite-lived intangibles may not be recoverable, we could have impairment charges that would negatively affect our earnings.

As of March 31, 2014, our consolidated balance sheet reflected $37.5 million of goodwill and definite-lived intangible assets. We periodically evaluate whether events and circumstances have occurred, such that the potential for reduced expectations for future cash flows coupled with further decline in the market price of our stock and market capitalization may indicate that the remaining balance of goodwill and definite-lived intangible assets may not be recoverable. If factors indicate that assets are impaired, we would be required to reduce the carrying value of our goodwill and definite-lived intangible assets, which could harm our results during the periods in which such a reduction is recognized. Our goodwill and definite-lived intangible assets may increase in future periods if we consummate other acquisitions. Amortization or impairment of these additional intangibles would, in turn, reduce our earnings.

Damage to our manufacturing facilities due to fire, natural disaster, or other events could adversely affect our operating results and financial condition.

The destruction or closure of any of our facilities for a significant period of time as a result of fire, explosion, blizzard, act of war or terrorism, flood, tornado, earthquake, lightning, other natural disasters, required maintenance or other events could harm us financially, increasing our costs of doing business and limiting our ability to deliver our manufacturing services on a timely basis. Our insurance coverage with respect to damages to our facilities or our customers’ products caused by natural disasters is limited and is subject to deductibles and coverage limits. Such coverage may not be adequate or continue to be available at commercially reasonable rates and terms.

In the event one or more of our facilities is closed on a temporary or permanent basis as a result of a natural disaster, required maintenance or other event, our operations could be significantly disrupted. Such events could delay or prevent product manufacturing and shipment for the time required to transfer production or repair, rebuild or replace the affected manufacturing facilities. This time frame could be lengthy and result in significant expenses for repair and related costs. While we have in place disaster recovery plans, there can be no assurance that such plans will be sufficient to allow our operations to continue in the event of every natural or man-made disaster, pandemic, required repair or other extraordinary event. Any extended inability to continue our operations at unaffected facilities following such an event would reduce our revenue and potentially damage our reputation as a reliable supplier.

Our substantial indebtedness could adversely affect our business and limit our ability to plan for or respond to changes in our business, and we may be unable to generate sufficient cash flow to satisfy our significant debt service obligations.

As of March 31, 2014, we had total indebtedness of approximately $604.3 million, which represented approximately 47% of our total capitalization. We may incur substantial additional indebtedness in the future, including additional borrowings under our revolving credit facility.

Our substantial indebtedness and the fact that a substantial portion of our cash flow from operations must be used to make principal and interest payments on this indebtedness could have important consequences, including the following:

 

   

increasing our vulnerability to general adverse economic and industry conditions;

   

reducing the availability of our cash flow for working capital, capital investments and other business activities and purposes;

   

limiting our flexibility in planning for, or reacting to, changes in our business and the industry in which we operate, which would place us at a competitive disadvantage compared to our competitors that may have less debt;

   

limiting, by the financial and other restrictive covenants in our debt agreements, our ability to borrow additional funds; and

   

having a material adverse effect on our business if we fail to comply with the covenants in our debt agreements, because such failure could result in an event of default that, if not cured or waived, could result in all or a substantial amount of our indebtedness becoming immediately due and payable.

Our ability to incur significant future indebtedness, whether to finance capital expenditures, potential acquisitions or for general corporate purposes, will depend on our ability to generate cash. This, to a certain extent, is subject to general economic, financial, competitive, legislative, regulatory, and other factors that are beyond our control. If our business does not generate sufficient cash flow from operations or if future borrowings are not available to us under our secured credit facilities in amounts sufficient to enable us to fund our liquidity needs, our financial condition and results of operations may be adversely affected. If we cannot make scheduled principal and interest payments on our debt obligations in the future, we may need to refinance all or a portion of our indebtedness on or before maturity, sell assets, delay capital expenditures, or seek additional equity. If we are unable to refinance our indebtedness on commercially reasonable terms or at all, or to effect any other of these actions, our business may be harmed.

 

33


Table of Contents

Our results may be negatively affected by changing interest rates.

We are subject to market risk from exposure to changes in interest rates based on our financing activities. As of March 31, 2014, $321.9 million, or 53%, of our outstanding indebtedness bore interest at a floating rate of LIBOR plus an applicable interest margin. Lines of credit we maintain at banks in mainland China used for working capital and capital investment for our mainland China facilities have interest rates tied to either LIBOR or People’s Bank of China rates with a margin adjustment. There can be no assurances that interest rates will not significantly change. Should LIBOR increase substantially in the future for any reason, our interest payments on our variable interest rate debt would also increase, lowering our net income. For additional information, see “Item 3 — Quantitative and Qualitative Disclosures About Market Risk.”

If we are unable to respond to rapid technological change and process development, we may not be able to compete effectively.

The market for our manufacturing services is characterized by rapidly changing technology and continual implementation of new production processes. The future success of our business will depend in large part upon our ability to maintain and enhance our technological capabilities, to manufacture products that meet changing customer needs, and to successfully anticipate or respond to technological changes on a cost-effective and timely basis. We expect that the investment necessary to maintain our technological position will increase as customers make demands for products and services requiring more advanced technology on a quicker turnaround basis. For example, in 2014 we have made and expect to make significant capital expenditures to expand our HDI and other advanced manufacturing capabilities. We may not be able to raise additional funds in order to respond to technological changes as quickly as our competitors.

In addition, the PCB industry could encounter competition from new or revised manufacturing and production technologies that render existing manufacturing and production technology less competitive or obsolete. We may not respond effectively to the technological requirements of the changing market. If we need new technologies and equipment to remain competitive, the development, acquisition, and implementation of those technologies and equipment may require us to make significant capital investments.

We are subject to the requirements of the National Industrial Security Program Operating Manual for our facility security clearance, which is a prerequisite to our ability to perform on classified contracts for the U.S. government.

A facility security clearance is required in order to be awarded and perform on classified contracts for the DoD and certain other agencies of the U.S. government. As a cleared entity, we must comply with the requirements of the National Industrial Security Program Operating Manual, or NISPOM, and any other applicable U.S. government industrial security regulations. Further, due to the fact that a significant portion of our voting equity is owned by a non-U.S. entity, we are required to be governed by and operate in accordance with the terms and requirements of the Special Security Agreement, or the SSA. The terms of the SSA have been previously disclosed in our SEC filings.

If we were to violate the terms and requirements of the SSA, the NISPOM, or any other applicable U.S. government industrial security regulations (which may apply to us under the terms of classified contracts), we could lose our security clearance. We cannot be certain that we will be able to maintain our security clearance. If for some reason our security clearance is invalidated or terminated, we may not be able to continue to perform on classified contracts and would not be able to enter into new classified contracts, which could adversely affect our revenues.

The prominence of EMS companies as our customers could reduce our gross margins, potential sales, and customers.

Sales to EMS companies represented approximately 41% and 38% of our net sales for the quarters ended March 31, 2014 and April 1, 2013, respectively. Sales to EMS providers include sales directed by OEMs as well as orders placed with us at the EMS providers’ discretion. EMS providers source on a global basis to a greater extent than OEMs. The growth of EMS providers increases the purchasing power of such providers and could result in increased price competition or the loss of existing OEM customers. In addition, some EMS providers, including some of our customers, have the ability to directly manufacture PCBs and create backplane assemblies. If a significant number of our other EMS customers were to acquire these abilities, our customer base might shrink, and our sales might decline substantially. Moreover, if any of our OEM customers outsource the production of PCBs and creation of backplane assemblies to these EMS providers, our business, results of operations, and financial condition may be harmed.

 

34


Table of Contents

The former owners of our Asia Pacific operating segment own a substantial percentage of our common stock.

We issued a large amount of stock to the principal owners of Meadville in connection with our acquisition of our Asia Pacific operating segment. As of March 31, 2014, approximately 33% of our common stock was beneficially owned by Su Sih (BVI) Limited, a company organized under the laws of the British Virgin Islands (referred to as Su Sih). Su Sih is a holding company wholly owned by Mr. Tang Hsiang Chien, a citizen of Hong Kong Special Administrative Region of the People’s Republic of China and the father of our director Mr. Tang Chung Yen, Tom. Su Sih and certain affiliates of Mr. Tang Hsiang Chien, if any, who are Principal Shareholders (as defined in the Shareholders Agreement dated April 9, 2010 as amended on September 14, 2012), are entitled to jointly nominate one individual to our board of directors and a majority of the members of the board of directors of the Asia Pacific operating segment. If our Principal Shareholders — or any significant shareholder — were to sell a large number of shares of our common stock, the market price of our common stock could significantly decline. In addition, our relationship with our principal lenders might be negatively impacted.

If we are unable to manage our growth effectively, our business could be negatively affected.

We have experienced, and expect to continue to experience, growth in the scope and complexity of our operations. This growth may strain our managerial, financial, manufacturing, and other resources. In order to manage our growth, we may be required to continue to implement additional operating and financial controls and hire and train additional personnel. There can be no assurance that we will be able to do so in the future, and failure to do so could jeopardize our expansion plans and seriously harm our operations. In addition, growth in our capacity could result in reduced capacity utilization and a corresponding decrease in gross margins.

Our international sales are subject to laws relating to trade, export controls and foreign corrupt practices, the violation of which could adversely affect our operations.

We are required to comply with all applicable domestic and foreign export control laws, including the International Traffic in Arms Regulations, or ITAR, and the Export Administration Regulations, or EAR. Some items manufactured by us are controlled for export by the United States Department of Commerce’s Bureau of Industry and Security under the EAR. In addition, we are subject to the Foreign Corrupt Practices Act and international counterparts that bar bribes or unreasonable gifts for foreign governments and officials. Violation of any of these laws or regulations could result in significant sanctions, including large monetary penalties and suspension or debarment from participation in future government contracts, which could reduce our future revenue and net income.

Our failure to comply with the requirements of environmental laws could result in litigation, fines, revocation of permits necessary to our manufacturing processes, or debarment from our participation in federal government contracts.

Our operations are regulated under a number of federal, state, local, and foreign environmental and safety laws and regulations that govern, among other things, the discharge of hazardous materials into the air and water, as well as the handling, storage, and disposal of such materials. These laws and regulations include the Clean Air Act, the Clean Water Act, the Resource Conservation and Recovery Act, the Superfund Amendment and Reauthorization Act, the Comprehensive Environmental Response, Compensation and Liability Act, the Toxic Substances Control Act, and the Federal Motor Carrier Safety Improvement Act, as well as analogous state, local, and foreign laws. Compliance with these environmental laws is a major consideration for us because our manufacturing processes use and generate materials classified as hazardous. Because we use hazardous materials and generate hazardous wastes in our manufacturing processes, we may be subject to potential financial liability for costs associated with the investigation and remediation of our own sites, or sites at which we have arranged for the disposal of hazardous wastes, if such sites become contaminated. Even if we fully comply with applicable environmental laws and are not directly at fault for the contamination, we may still be liable. The wastes we generate include spent ammoniacal and cupric etching solutions, metal stripping solutions, waste acid solutions, waste alkaline cleaners, waste oil, and waste waters that contain heavy metals such as copper, tin, lead, nickel, gold, silver, cyanide, and fluoride, and both filter cake and spent ion exchange resins from equipment used for on-site waste treatment.

Any material violations of environmental laws or failure to maintain required environmental permits could subject us to fines, penalties, and other sanctions, including the revocation of our effluent discharge permits, which could require us to cease or limit production at one or more of our facilities, and harm our business, results of operations, and financial condition. Even if we ultimately prevail, environmental lawsuits against us would be time consuming and costly to defend.

Environmental laws also could become more stringent over time, imposing greater compliance costs and increasing risks and penalties associated with violation. We operate in environmentally sensitive locations, and we are subject to potentially conflicting and changing regulatory agendas of political, business, and environmental groups. Changes or restrictions on discharge limits, emissions levels, material storage, handling, or disposal might require a high level of unplanned capital investment or global relocation. It is possible that environmental compliance costs and penalties from new or existing regulations may harm our business, results of operations, and financial condition.

 

35


Table of Contents

We are increasingly required to certify compliance with various material content restrictions in our products based on laws of various jurisdictions or territories such as the Restriction of Hazardous Substances (RoHS) and Registration, Evaluation, Authorization and Restriction of Chemicals (REACH) directives in the European Union and China’s RoHS legislation. New York City has adopted identical RoHS restrictions, and many U.S. states are considering similar rules and legislation. In addition, we must also certify as to the non-applicability to the EU’s Waste Electrical and Electronic Equipment directive for certain products that we manufacture. The REACH directive requires adoption of Substances of Very High Concern (SVHCs) periodically. We must survey our supply chain and certify to the non-presence or presence of SVHCs to our customers. As with other types of product certifications that we routinely provide, we may incur liability and pay damages if our products do not conform to our certifications.

We are also subject to a variety of environmental laws and regulations in the People’s Republic of China, or PRC, which impose limitations on the discharge of pollutants into the air and water and establish standards for the treatment, storage, and disposal of solid and hazardous wastes. The manufacturing of our products generates gaseous chemical wastes, liquid wastes, waste water and other industrial wastes from various stages of the manufacturing process. Production sites in China are subject to regulation and periodic monitoring by the relevant environmental protection authorities. Environmental claims or the failure to comply with current or future regulations could result in the assessment of damages or imposition of fines against us, suspension of production, or cessation of operations.

The process to manufacture PCBs requires adherence to city, county, state, federal and foreign environmental regulations regarding the storage, use, handling and disposal of chemicals, solid wastes and other hazardous materials as well as compliance with air quality standards. We believe that our facilities in the United States comply in all material respects with applicable environmental laws and regulations. In China, governmental authorities are taking various steps to tighten the rules and regulations governing environmental issues. An update to Chinese environmental law was issued in late 2012, but allows for an interim period in which foreign entities may adjust to the new regulatory regime and come into full compliance with the new laws. Our plants in China are not yet in full compliance with the current environmental regulations as updated in late 2012. We do not anticipate any immediate risk of government fines or temporary closure of Chinese plants. We have established and enacted an investment plan to address the regulatory changes in order to come into full compliance during the interim period. There can be no assurance that violations will not occur in the future.

Employee theft or fraud could result in loss.

Certain of our employees have access to, or signature authority with respect to, bank accounts or other company assets, which could expose us to fraud or theft. In addition, certain employees have access to key IT infrastructure and to customer and other information that is commercially valuable. Should any employee, for any reason, compromise our IT systems, or misappropriate customer or other information, we could incur losses, including losses relating to claims by our customers against us, the willingness of customers to do business with us may be damaged and, in the case of our defense business, we could be debarred from future participation in government programs. Any such losses may not be fully covered by insurance.

Because we sell on a purchase order basis, we are subject to uncertainties and variability in demand by our customers that could decrease revenues and harm our operating results.

Although we have long-term contracts with many customers, those contracts generally do not contain volume commitments. We generally sell to customers on a purchase order basis. Our quick-turn orders are subject to particularly short lead times. Consequently, our sales are subject to short-term variability in demand by our customers. Customers submitting purchase orders may cancel, reduce, or delay their orders for a variety of reasons. The level and timing of orders placed by our customers may vary due to:

 

   

customer attempts to manage inventory;

   

changes in customers’ manufacturing strategies, such as a decision by a customer to either diversify or consolidate the number of PCB manufacturers or backplane assembly service providers used or to manufacture or assemble its own products internally;

   

variation in demand for our customers’ products; and

   

changes in new product introductions.

We have periodically experienced terminations, reductions, and delays in our customers’ orders. Further terminations, reductions, or delays in our customers’ orders could harm our business, results of operations, and financial condition.

 

36


Table of Contents

Increasingly, our larger customers are requesting that we enter into supply agreements with them that have restrictive terms and conditions. These agreements typically include provisions that increase our financial exposure, which could result in significant costs to us.

Increasingly, our larger customers are requesting that we enter into supply agreements with them. These agreements typically do not include volume commitments, but do include provisions that generally serve to increase our exposure for product liability and limited sales returns, which could result in higher costs to us as a result of such claims. In addition, these agreements typically contain provisions that seek to limit our operational and pricing flexibility and extend payment terms, which can adversely impact our cash flow and results of operations.

Our business has benefited from OEMs deciding to outsource their PCB manufacturing and backplane assembly needs to us. If OEMs choose to provide these services in-house or select other providers, our business could suffer.

Our future revenue growth partially depends on new outsourcing opportunities from OEMs. Current and prospective customers continuously evaluate our performance against other providers. They also evaluate the potential benefits of manufacturing their products themselves. To the extent that outsourcing opportunities are not available either due to OEM decisions to produce these products themselves or to use other providers, our financial results and future growth could be adversely affected.

Consolidation among our customers could adversely affect our business.

Recently, some of our large customers have consolidated, and further consolidation of customers may occur. Depending on which organization becomes the controller of the supply chain function following the consolidation, we may not be retained as a preferred or approved supplier. In addition, product duplication could result in the termination of a product line that we currently support. While there is potential for increasing our position with the combined customer, there does exist the potential for decreased revenue if we are not retained as a continuing supplier. We also face the risk of increased pricing pressure from the combined customer because of its increased market share.

We are exposed to the credit risk of some of our customers and to credit exposures in weakened markets.

Most of our sales are on an “open credit” basis, with standard industry payment terms. We monitor individual customer payment capability in granting such open credit arrangements, seek to limit such open credit to amounts we believe the customers can pay, and maintain reserves we believe are adequate to cover exposure for doubtful accounts. During periods of economic downturn in the electronics industry and the global economy, our exposure to credit risks from our customers increases. Although we have programs in place to monitor and mitigate the associated risks, such programs may not be effective in reducing our credit risks.

Our 10 largest OEM customers accounted for approximately 53% and 51% of our net sales for the quarters ended March 31, 2014 and April 1, 2013, respectively. Additionally, our OEM customers often direct a significant portion of their purchases through a relatively limited number of EMS companies. Sales to EMS companies represented approximately 41% and 38% our net sales for the quarters ended March 31, 2014 and April 1, 2013, respectively. Our contractual relationship is often with the EMS companies, who are obligated to pay us for our products. Because we expect our OEM customers to continue to direct our sales to EMS companies, we expect to continue to be subject to this credit risk with a limited number of EMS customers. If one or more of our significant customers were to become insolvent or were otherwise unable to pay us, our results of operations would be harmed.

We rely on suppliers for the timely delivery of raw materials and components used in manufacturing our PCBs and backplane assemblies. If a raw material supplier fails to satisfy our product quality standards, it could harm our customer relationships.

Although we have preferred suppliers for most of our raw materials, the materials we use are generally readily available in the open market, and numerous other potential suppliers exist. The components for backplane assemblies in some cases have limited or sole sources of supply. Consolidations and restructuring in our supplier base may result in adverse materials pricing due to reduction in competition among our suppliers. Furthermore, if a raw material or component supplier fails to satisfy our product quality standards, including standards relating to “conflict metals” (discussed above in a separate risk factor), it could harm our customer relationships. Suppliers may from time to time extend lead times, limit supplies, or increase prices, due to capacity constraints or other factors, which could harm our ability to deliver our products on a timely basis.

 

37


Table of Contents

We may need additional capital in the future to fund investments in our operations, refinance our indebtedness and to maintain and grow our business, and such capital may not be available on acceptable terms, or at all.

Our business is capital-intensive, and our ability to increase revenue, profit, and cash flow depends upon continued capital spending. If we are unable to fund our capital requirements as currently planned, however, it would have a material adverse effect on our business, financial condition, and results of operations. If we do not achieve our expected operating results, we would need to reallocate our sources and uses of operating cash flows. This may include borrowing additional funds to service debt payments, which may impair our ability to make investments in our business. Looking ahead at long-term needs, we may need to raise additional funds for a number of purposes, including:

 

   

to fund capital equipment purchases to increase production capacity, expand our technological capabilities and replace aging equipment;

   

to refinance our existing indebtedness;

   

to fund our operations beyond 2014;

   

to fund working capital requirements for future growth that we may experience;

   

to enhance or expand the range of services we offer;

   

to increase our sales and marketing activities; or

   

to respond to competitive pressures or perceived opportunities, such as investment, acquisition and international expansion activities.

Should we need to raise funds through incurring additional debt, we may become subject to covenants even more restrictive than those contained in our current debt instruments. Furthermore, if we issue additional equity, our equity holders would suffer dilution. There can be no assurance that additional capital would be available on a timely basis, on favorable terms, or at all. If such funds are not available when required or on acceptable terms, our business and financial results could suffer.

Our Asia Pacific operations could be adversely affected by a shortage of utilities or a discontinuation of priority supply status offered for such utilities.

The manufacturing of PCBs requires significant quantities of electricity and water. Our Asia Pacific operations have historically purchased substantially all of the electrical power for their manufacturing plants in China from local power plants. Because China’s economy has recently been in a state of growth, the strain on the nation’s power plants is increasing, which has led to continuing power outages in various parts of the country. There may be times when our operations in China may be unable to obtain adequate sources of electricity to meet production requirements. Additionally, we would not likely maintain any back-up power generation facilities for our operations, so if we were to lose power at any of our facilities, we would be required to cease operations until power was restored. Any stoppage of power could adversely affect our ability to meet our customers’ orders in a timely manner, thus potentially resulting in a loss of business and increased costs of manufacturing. In addition, the sudden cessation of power supply could damage our equipment, resulting in the need for costly repairs or maintenance as well as damage to products in production, resulting in an increase in scrapped products. Similarly, the sudden cessation of the water supply to Chinese facilities could adversely affect our ability to fulfill orders in a timely manner, potentially resulting in a loss of business and under-utilization of capacity. Various regions in China have in the past experienced shortages of both electricity and water and unexpected interruptions of power supply. From time to time, the Chinese government rations electrical power, which can lead to unscheduled production interruptions in our manufacturing facilities. There can be no assurance that our required utilities would not in the future experience material interruptions in the future, which could have a material adverse effect on our results of operations and financial condition.

Our acquisition strategy involves numerous risks.

As part of our business strategy, we expect that we will continue to grow by pursuing acquisitions of businesses, technologies, assets, or product lines that complement or expand our business. Risks related to an acquisition may include:

 

   

the potential inability to successfully integrate acquired operations and businesses or to realize anticipated synergies, economies of scale, or other expected value;

   

diversion of management’s attention from normal daily operations of our existing business to focus on integration of the newly acquired business;

   

unforeseen expenses associated with the integration of the newly acquired business;

   

difficulties in managing production and coordinating operations at new sites;

   

the potential loss of key employees of acquired operations;

   

the potential inability to retain existing customers of acquired companies when we desire to do so;

   

insufficient revenues to offset increased expenses associated with acquisitions;

 

38


Table of Contents
   

the potential decrease in overall gross margins associated with acquiring a business with a different product mix;

   

the inability to identify certain unrecorded liabilities;

   

the potential need to restructure, modify, or terminate customer relationships of the acquired company;

   

an increased concentration of business from existing or new customers; and

   

the potential inability to identify assets best suited to our business plan.

Acquisitions may cause us to:

 

   

enter lines of business and/or markets in which we have limited or no prior experience;

   

issue debt and be required to abide by stringent loan covenants;

   

assume liabilities; record goodwill and indefinite-lived intangible assets that will be subject to impairment testing and potential periodic impairment charges;

   

become subject to litigation and environmental issues, which include product material content certifications;

   

incur unanticipated costs;

   

incur large and immediate write-offs;

   

issue common stock that would dilute our current stockholders’ percentage ownership; and

   

incur substantial transaction-related costs, whether or not a proposed acquisition is consummated.

Acquisitions of high technology companies are inherently risky, and no assurance can be given that our recent or future acquisitions will be successful and will not harm our business, operating results, or financial condition. Failure to manage and successfully integrate acquisitions we make could harm our business and operating results in a material way. Even when an acquired company has already developed and marketed products, product enhancements may not be made in a timely fashion. In addition, unforeseen issues might arise with respect to such products after the acquisition.

Outages, computer viruses, break-ins and similar events could disrupt our operations, and breaches of our security systems may cause us to incur significant legal and financial exposure.

We rely on information technology networks and systems, some of which are owned and operated by third parties, to process, transmit and store electronic information. In particular, we depend on our information technology infrastructure for a variety of functions, including worldwide financial reporting, inventory management, procurement, invoicing and email communications. Any of these systems may be susceptible to outages due to fire, floods, power loss, telecommunications failures, terrorist attacks and similar events. Despite the implementation of network security measures, our systems and those of third parties on which we rely may also be vulnerable to computer viruses, break-ins and similar disruptions. If we or our vendors are unable to prevent such outages and breaches, our operations could be disrupted. If unauthorized parties gain access to our information systems or such information is used in an unauthorized manner, misdirected, lost or stolen during transmission, any theft or misuse of such information could result in, among other things, unfavorable publicity, governmental inquiry and oversight, difficulty in marketing our services, allegations by our customers that we have not performed our contractual obligations, litigation by affected parties and possible financial obligations for damages related to the theft or misuse of such information, any of which could have a material adverse effect on our results of operations and financial condition.

Our business may suffer if any of our key senior executives discontinues employment with us or if we are unable to recruit and retain highly skilled engineering and sales staff.

Our future success depends to a large extent on the services of our key managerial employees. We may not be able to retain our executive officers and key personnel or attract additional qualified management in the future. We can make no assurances that future changes in executive management will not have a material adverse effect on our business, financial condition or results of operations. Our business also depends on our continuing ability to recruit, train, and retain highly qualified employees, particularly engineering and sales and marketing personnel. The competition for these employees is intense, and the loss of these employees could harm our business. Further, our ability to successfully integrate acquired companies depends in part on our ability to retain key management and existing employees at the time of the acquisition.

Our manufacturing processes depend on the collective industry experience of our employees. If a significant number of these employees were to leave us, it could limit our ability to compete effectively and could harm our financial results.

We have limited patent or trade secret protection for our manufacturing processes. We rely on the collective experience of our employees involved in our manufacturing processes to ensure we continuously evaluate and adopt new technologies in our industry. Although we are not dependent on any one employee or a small number of employees, if a significant number of our employees involved in our manufacturing processes were to leave our employment, and we were not able to replace these people with new employees with comparable experience, our manufacturing processes might suffer as we might be unable to keep up with innovations in the industry. As a result, we may lose our ability to continue to compete effectively.

 

39


Table of Contents

We may be exposed to intellectual property infringement claims by third parties that could be costly to defend, could divert management’s attention and resources, and if successful, could result in liability.

We rely on a combination of copyright, patent, trademark and trade secret laws, confidentiality procedures, contractual provisions, and other measures to protect our proprietary information. All of these measures afford only limited protection. These measures may be invalidated, circumvented, or challenged, and others may develop technologies or processes that are similar or superior to our technology. We may not have the controls and procedures in place that are needed to adequately protect proprietary information. Despite our efforts to protect our proprietary rights, unauthorized parties may attempt to copy our products or obtain or use information that we regard as proprietary, which could adversely impact our revenues and financial condition.

Furthermore, there is a risk that we may infringe on the intellectual property rights of others. As is the case with many other companies in the PCB industry, we from time to time receive communications from third parties asserting patent rights to our products and enter into discussions with such third parties. Irrespective of the validity or the successful assertion of such claims, we could incur costs in either defending or settling any intellectual property disputes alleging infringement. If any claims are brought against the customers for such infringement, whether or not these have merit, we could be required to expend significant resources in defending such claims. In the event we are subject to any infringement claims, we may be required to spend a significant amount of money to develop non-infringing alternatives or obtain licenses. We may not be successful in developing such alternatives or in obtaining such licenses on reasonable terms or at all, which could disrupt the production processes, damage our reputation, and affect our revenues and financial condition.

Our business and operations could be adversely impacted by climate change initiatives.

Our manufacturing processes require that we purchase significant quantities of energy from third parties, which results in the generation of greenhouse gases, either directly on-site or indirectly at electric utilities. Both domestic and international legislation to address climate change by reducing greenhouse gas emissions could create increases in energy costs and price volatility. Considerable international attention is now focused on development of an international policy framework to guide international action to address climate change. Proposed and existing legislative efforts to control or limit greenhouse gas emissions could affect our energy sources and supply choices as well as increase the cost of energy and raw materials derived from sources that generate greenhouse gas emissions.

The economies of the countries in which we operate may be adversely affected by a recurrence of severe acute respiratory syndrome, or an outbreak of other epidemics such as H1N1 or avian flu.

Past occurrences of epidemics or pandemics, depending on their scale of occurrence, have caused different degrees of damage to the national and local economies in the affected countries. A recurrence of SARS or an outbreak of any other epidemics or pandemics, such as the H1N1 influenza or avian flu, especially in the areas where we have operations, or where we may have operations in the future, may result in quarantines, temporary closures of offices and manufacturing facilities, travel restrictions, or the temporary or permanent loss of key personnel. The perception that an outbreak of contagious disease may occur again may also have an adverse effect on the economic conditions of affected countries. Any of the above may cause material disruptions to our operations, which in turn may adversely affect our financial condition and results of operations.

Item 6. Exhibits

 

Exhibit

Number

  

Exhibits

  31.1    CEO Certification Pursuant to Section 302 of the Sarbanes — Oxley Act of 2002.
  31.2    CFO Certification Pursuant to Section 302 of the Sarbanes — Oxley Act of 2002.
  32.1    CEO Certification Pursuant to Section 906 of the Sarbanes — Oxley Act of 2002.
  32.2    CFO Certification Pursuant to Section 906 of the Sarbanes — Oxley Act of 2002.
101.INS    XBRL Instance Document
101.SCH    XBRL Taxonomy Extension Schema Document
101.CAL    XBRL Taxonomy Extension Calculation Linkbase Documents
101.DEF    XBRL Taxonomy Extension Definition Linkbase Documents
101.LAB    XBRL Taxonomy Extension Label Linkbase Documents
101.PRE    XBRL Taxonomy Extension Presentation Linkbase Documents

 

40


Table of Contents

SIGNATURES

Pursuant to the requirements of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned thereunto duly authorized.

 

      TTM Technologies, Inc.
      /s/ Thomas T. Edman

Dated: May 6, 2014

      Thomas T. Edman
      President and Chief Executive Officer
      /s/ Todd B. Schull

Dated: May 6, 2014

      Todd B. Schull
      Executive Vice President, Chief Financial Officer, Treasurer and Secretary

 

41


Table of Contents

EXHIBIT INDEX

 

Exhibit

Number

  

Exhibits

  31.1    CEO Certification Pursuant to Section 302 of the Sarbanes — Oxley Act of 2002.
  31.2    CFO Certification Pursuant to Section 302 of the Sarbanes — Oxley Act of 2002.
  32.1    CEO Certification Pursuant to Section 906 of the Sarbanes — Oxley Act of 2002.
  32.2    CFO Certification Pursuant to Section 906 of the Sarbanes — Oxley Act of 2002.
101.INS    XBRL Instance Document
101.SCH    XBRL Taxonomy Extension Schema Document
101.CAL    XBRL Taxonomy Extension Calculation Linkbase Documents
101.DEF    XBRL Taxonomy Extension Definition Linkbase Documents
101.LAB    XBRL Taxonomy Extension Label Linkbase Documents
101.PRE    XBRL Taxonomy Extension Presentation Linkbase Documents

 

42