SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

 

Form 10-K

 

 

Commission file number 0-17276

 

FSI INTERNATIONAL, INC.

(Exact Name of Registrant as specified in its charter)

 

 

3455 LYMAN BOULEVARD, CHASKA, MINNESOTA 55318-3052

(Address of principal executive offices and Zip Code)

 

Registrant’s telephone number, including area code:

(952) 448-5440

 

Securities registered pursuant to Section 12(b) of the Securities Exchange Act:
Common Stock, no par value

 

Securities registered pursuant to Section 12(g) of the Securities Exchange Act:

 

Indicate by a check mark if the Registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act of 1933.  Yes o     No þ

 

Indicate by a check mark if the Registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Securities Exchange Act of 1934.  Yes o No þ

 

Indicate by check mark whether the Registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the Registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes þ     No o

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K is not contained herein, and will not be contained, to the best of Registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.  þ

 

Indicate by check mark whether the Registrant is a large accelerated filer, an accelerated filer or a non-accelerated filer. See definition of “accelerated filer and large accelerated filer” in Rule 12b-2 of the Securities Exchange Act of 1934.

Large accelerated filer  o     Accelerated filer  þ     Non-accelerated filer  o     

 

Indicate by a check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act of 1934).  Yes o     No þ

 

The aggregate market value of the voting stock held by non-affiliates of the Registrant, based on the closing price on February 23, 2007, the last business day of the Registrant’s most recently completed second fiscal quarter, as reported on the NASDAQ National Market System, was approximately $155,700,000. Shares of common stock held by each officer and director have been excluded from this computation in that such persons may be deemed to be affiliates. This amount is provided only for purposes of this report on Form 10-K and does not represent an admission by the Registrant or any such person as to the status of such person.

 

As of October 30, 2007, the Registrant had issued and outstanding 30,545,000 shares of common stock.

 

 

DOCUMENTS INCORPORATED BY REFERENCE

 

Portions of the Registrant’s definitive proxy statement for the Annual Meeting of Shareholders to be held on January 16, 2008 and to be filed within 120 days after the Registrant’s fiscal year ended August 25, 2007, are incorporated by reference into Part III of this Form 10-K Report. (The Audit and Finance Committee Report, the Compensation Committee Report and the stock performance graph of the Registrants proxy statement are expressly not incorporated by reference herein.)

 

PART I

 

Cautionary Information Regarding Forward-Looking Statements

 

Certain statements contained in this report on Form 10-K constitute forward-looking statements within the meaning of Section 21E of the Securities Exchange Act of 1934, as amended, and are subject to the safe harbor created by that statute. Typically we identify forward-looking statements by use of an asterisk “*”. In some cases, you can identify forward-looking statements by terminology such as “expects,” “anticipates,” “intends,” “may,” “should,” “plans,” “believes,” “seeks,” “estimates,” “could,” “would” or the negative of such terms or other comparable terminology. Such forward-looking statements are based upon current expectations and beliefs and involve numerous risks and uncertainties, both known and unknown, that could cause actual events or results to differ materially from these forward-looking statements. For a discussion of factors that could cause actual results to differ materially from those described in this Form 10-K, see the discussion of risk factors set forth below in Item 1.A. of this report. Although we believe that the expectations reflected in the forward-looking statements are reasonable as of the date of this report, we cannot guarantee future results, levels of activity, performance or achievements. We undertake no duty to update any of the forward-looking statements after the date of this report.

 

 

The Company

 

FSI International, Inc., a Minnesota corporation organized in 1973 (“FSI”), designs, manufactures, markets and supports equipment used in the fabrication of microelectronics, such as advanced semiconductor devices. In fiscal 2007, we provided surface conditioning technology solutions and microlithography systems and support services to worldwide manufacturers of integrated circuits.

 

FSI manufactures, markets and supports surface conditioning equipment that uses wet, vapor, cryogenic and other chemistry techniques to clean, strip or etch the surfaces of silicon wafers. The Company’s POLARIS^® Systems and Services (“PSS”) business provides low cost, highly flexible products that are used to deposit and develop light-sensitive material onto the surface of silicon wafers and similar substrates. These businesses are supported by service groups that provide finance, human resources, information services, sales and service, marketing and other administrative functions.

 

In fiscal 2007, we directly sold and serviced our products in North America, Europe, and the Asia Pacific region, except for Japan. In Japan, our products are sold and serviced through m•FSI LTD, a company in which FSI maintains a 20 percent equity ownership. See Note 4 of the Notes to Consolidated Financial Statements for a discussion of our equity ownership in m•FSI LTD.

 

Industry Background

 

The complex process of fabricating semiconductor devices involves several distinct phases that are repeated numerous times. Because each production phase typically requires different processing technologies and equipment, no single semiconductor equipment supplier currently produces all types of tools needed to equip an entire state-of-the-art fabrication facility. Instead, semiconductor device manufacturers typically equip their facilities by combining manufacturing equipment produced by a number of suppliers. Each set of equipment performs specific functions in the manufacturing process.

Generally, increasing demand for computer chips, new computer chip designs, new materials of fabrication and new substrate (the underlying material upon which a semiconductor device or integrated circuit is formed) types — both size and composition — drives demand for new microelectronics manufacturing equipment and processes. Industries that use microelectronics increasingly demand higher performance devices from manufacturers. Over the last decade, device manufacturers have reduced the feature size and substantially increased the functionality of individual devices through a number of technological advances. Many of these advancements are made possible using the equipment and technologies FSI provides to the semiconductor industry.

 

Our business depends upon the microelectronics manufacturers’ capital equipment expenditures. Manufacturers’ expenditures in turn depend on the current and anticipated market demand for products that use microelectronic devices. The microelectronics industry is cyclical in nature and experiences periodic downturns. Microelectronics manufacturers require equipment suppliers to take an increasingly active role in meeting the manufacturers’ technology development and capital productivity requirements. Equipment suppliers satisfy this requirement by developing and supporting products and processes required to address the new trends in microelectronics manufacturing. These trends include development of smaller geometries, transition to new materials, migration to 300 millimeter (“mm”) wafers and wafer level packaging.

 

A number of semiconductor device manufacturers began the transition from 200 to 300mm diameter wafers in calendar 2000. Based upon a report published in October 2007 by the Gartner Group, a leading industry market research firm, the percentages of investment in semiconductor process equipment allocated by semiconductor manufacturers to 300mm capable products were 78% in calendar 2006 and are forecasted to be more than 87% of total equipment spending in calendar 2008.*

 

According to the Gartner Group, purchases of semiconductor equipment by microelectronics manufacturers totaled $42 billion in calendar 2006. Based upon the most recent Gartner Group forecast, spending on semiconductor equipment is expected to increase by 4.1% to $44 billion in calendar 2007.*

 

Products

 

The mix of specific system sales within each product group we sell has varied significantly from year to year. The following table sets forth, for the periods indicated, the amount of revenues and approximate percentages of our total revenues of each of our principal product lines:

 

 

Surface Conditioning Products

 

Our surface conditioning (“SC”) products perform etching and cleaning operations for:

 

 

Today’s most advanced integrated circuit (“IC”) manufacturing involves more than 100 surface preparation steps. Many factors are considered when designing and optimizing a surface preparation process to meet a particular application need. These factors can include:

 

 

The priority of each factor in determining the final surface preparation process can vary widely across the approximately 100 different steps and depends on the contaminants that need to be removed, the materials that need to be preserved on the wafer surface, the dimensions of patterned features and overall process integration. These varied requirements and priorities indicate that no single surface preparation technology can provide the optimal process for each surface preparation requirement. This is why FSI offers a range of technologies that allow us, with our customers, to select and optimize the best solution for each step. These technologies include batch spray, batch immersion and single wafer cryogenic aerosol.

 

Batch Spray Processing Systems.  Our batch spray processing systems, which include the ZETA^® and MERCURY^® Spray Cleaning Systems, are sophisticated surface conditioning systems that remove unwanted films and contaminants from the surface of semiconductor wafers at various stages in the microelectronic device fabrication process. Multiple cassettes that contain up to 26 wafers each are placed onto a turntable inside the system’s process chamber. As the turntable rotates, dispense ports apply a chemical spray to the wafers’ surfaces to dissolve and remove the undesirable films and contaminants. After chemical application, ultra pure water is sprayed on the wafer surfaces to rinse away the chemicals. Multiple chemical and rinse steps may be employed depending on the customer’s specific application. The process sequence is completed with a drying step where a flow of nitrogen into the chamber dries the wafers and the chamber. Our control system and chemical mixing manifold allow the user to define, control and monitor a variety of chemical mixtures, temperatures and sequences. This enables the user to rapidly develop new processes and utilize the systems for multiple applications.

 

Our batch spray systems achieve state-of-the-art performance and are well suited for applications that require removal of high levels of contamination, such as implanted photoresist and unreacted salicide metal. Through efficient mixing and use of chemicals and water packaged in a small product footprint, customers may realize lower operational costs than with competing systems.

 

The ZETA^® System is a fully-automated batch spray processor currently available in configurations for both 200 and 300mm wafers. The advanced process controls, process capability and automation are ideal for leading technology nodes, particularly from 130 nanometers (“nm”) down to 45nm and below. Our ZETA products provide a reliable, automated environment to move wafers to and from the process chamber. This tool’s eight-chemical flow system allows for a wide range of chemical blend ratios. The system is also available in a semi-automated configuration capable of processing 200mm or 150mm wafers.

 

Introduced in 2006, the ZETA G3 platform builds on the capabilities of the previous generation of ZETA systems and offers IC manufacturers better performance and higher productivity. The ZETA’s G3 hardware uniquely enables the implementation of ViPR^tm technology (described below) and features enhanced robotics that enable higher throughput for certain applications. The ZETA G3 platform is designed for 300mm batch spray FEOL and BEOL cleaning processes with proven capability for 90, 65 and 45nm technology nodes. Our ZETA systems range in price from $1,000,000 to $2,400,000.

 

Subsequent generations of the ZETA system have increased capabilities with the addition of new tool packages and processes, including:

 

 

 

To address our customers’ desire for environmentally friendly processes, we supply an ozonated water module for use with our ZETA and MERCURY spray processing systems and MAGELLAN immersion system. The use of ozone (a form of oxygen having three atoms to the molecule) in semiconductor processing uses only oxygen and water instead of sulfuric acid and hydrogen peroxide mixtures and lowers costs by reducing chemical consumption, water usage and waste treatment.

 

The MERCURY^® System is a semi-automated batch spray processor designed for wafer sizes up to 200mm in diameter and process technologies through the 130nm node. The system offers the benefits of low capital cost and low cost of ownership in a small footprint. The MERCURY System ranges in price from $400,000 to $1,100,000 depending on features.

 

CryoKinetic Processing Systems.  Our ANTARES CryoKinetic Cleaning System is a fully automated, single-wafer cleaning platform designed for 200 and 300mm wafers. Cryokinetic cleaning is a physical energy transfer process used to remove non-chemically bonded particles from the surface of a microelectronic device. These systems offer a field-proven history of removing surface particle defects and improving customer yields. The ANTARES system uses an all-dry non-chemically reactive method for removing defects from all surface types from the beginning to the end of the device manufacturing process. Of particular benefit to our customers is its inherent compatibility with new device materials and increasingly smaller device features.

 

CryoKinetic clean technology allows our customers to insert particle removal steps in the manufacturing line where previous or traditional wet cleaning and scrubber methods have been phased out due to their incompatibility with new materials and their propensity to cause watermark residue and surface charge defects. Implementing the CryoKinetic clean technology allows our customers to recover yield that would normally be lost where traditional approaches cannot be used, such as after in-line electrical probing of wafers. Because of the increasing number of BEOL wiring levels on advanced devices, IC manufacturers are performing electrical tests on partially completed (in-line) wafers by contacting the wafer surface with metal probes. This in-line probing creates debris on the wafer surface that cannot be removed with traditional cleaning methods due to the sensitivity of the exposed materials (copper and low-k dielectrics). This debris results in extensive yield loss as the wafers proceed through the rest of the manufacturing process, causing IC manufacturers to scrap those wafers which are tested with in-line probing. The ANTARES clean can eliminate defects created by in-line electrical probing so IC makers can collect electrical test data without scraping wafers. In this case, the IC makers can test more wafers for better process control, which may result in higher yield.

 

The ANTARES system is also available with the AspectClean^tm process. The AspectClean process is a method of removing particle defects from FEOL and BEOL patterned structures without altering film properties or physically damaging the structures, which is becoming more critical at each progressively smaller technology node. While traditional methods of defect reduction have been phased out due to wafer damage issues, the AspectClean process demonstrates a high removal efficiency on sensitive narrow structures without causing damage.

 

We believe the technical capabilities of the ANTARES system are extendable well beyond current technology nodes and may result in increased customer acceptance due to the limitations of scrubbing methods.* ANTARES systems range in price from $1,000,000 to $1,900,000.

 

Immersion Processing Systems.  Immersion cleaning systems are used to clean silicon wafers by immersing wafers in multiple tanks filled with process chemicals. These systems enable the implementation of high performance isopropyl alcohol (“IPA”) assisted drying to meet the critical cleaning requirements for 90, 65, and 45 nm technology nodes. Our MAGELLAN Immersion Cleaning System is a fully automated

immersion cleaning product designed for either 200 or 300mm wafers at advanced technology nodes and is capable of multiple cleans, including critical clean, resist strip and etch. We believe this system compares favorably to competing systems through its process performance, flexibility, extendibility, and rapid cycle time in a footprint that is smaller than the leading competition when configured for specific applications. The MAGELLAN Immersion Cleaning System incorporates a portfolio of exclusive intellectual property, including our Surface Tension Gradient (STG^®) rinse/dry technology, SymFlow^® etch technology, ozone oxide re-growth technology, and narrow-gate-compatible MegaLens^tm Acoustic Diffuser megasonic cleaning technology. The MAGELLAN System is qualified for several processes including FEOL critical clean, FEOL photoresist strip and post-ash clean, as well as oxide etch and nitride etch. The MAGELLAN System ranges in price from $2,500,000 to $3,800,000.

 

Vapor Processing Systems.  We discontinued the EXCALIBUR product line at the end of calendar year 2005 for advanced applications, but we have retained the extensive portfolio of intellectual property patents relating to this technology. We will continue to fill orders for existing customer demands, such as an EXCALIBUR system sale for an application in the microelectromechanical market (“MEMs”).

 

POLARIS^® Systems and Services Products

 

POLARIS^® Systems and Services (PSS) products are microlithography systems used to deposit polyimide resist and photoresist, light-sensitive, etch-resistant materials used to transfer an image to the surface of a silicon wafer, or similar material wafer, and then bake, chill and develop the deposited material. Our PSS business focuses on providing cost effective solutions to its existing base of POLARIS customers and for specialized markets, including wafer level packaging, MEMS, thin film head (a device manufactured on a silicon wafer which is capable of reading and writing information onto a compact disc or other information storage device), and radio frequency (RF) and optical devices.

 

Our PSS products and services include:

 

 

Spare Parts and Service

 

We offer system upgrade packages, spare part kits, software maintenance licenses, individual spare part components and support services that provide product and process enhancements to extend the life of previously purchased and installed surface conditioning and microlithography equipment. Our customer service and process engineers assist and train customers worldwide to perform preventive maintenance on, and to service, our equipment. In addition, our process engineering groups develop process applications to expand the capabilities of our equipment. These upgrade and spare part packages and support service programs enable our worldwide customers to realize a higher return on their capital investment.

We sell a variety of process, service and maintenance programs. A number of customers have purchased maintenance contracts in which our service employees work at the customer’s facility to provide process service and maintenance support for our equipment.

 

Backlog and Seasonality

 

Our backlog consists of customer purchase orders with delivery dates within the next 12 months. Our backlog was $15.2 million at fiscal 2007 year-end and $39.8 million at fiscal 2006 year-end. Approximately 42% of our backlog at fiscal 2007 year-end was comprised of orders from Intel Corporation and Mikron JSC. Approximately 36% of our backlog at fiscal 2006 year-end was comprised of orders from Intel Corporation and Seagate Technology, Inc. The loss of any of these customers could have a material adverse effect on our operations. All orders are subject to cancellation by the customer and in some cases a penalty provision could apply to a cancellation.

 

In fiscal 2007 and 2006, no significant purchase orders were canceled. Because of the timing and relative size of certain orders we received and possible changes in delivery schedules and order cancellations, our backlog can vary from time to time so that backlog as of any particular date is not necessarily indicative of actual sales for any subsequent period. Our business is cyclical but is not seasonal to any significant extent.

 

Research and Development

 

We believe that our future success depends in large part on our ability to enhance and advance, in collaboration with our customers and other equipment and materials manufacturers, our existing SC product lines to meet the changing needs of microelectronics manufacturers. We believe that industry trends, such as the use of smaller circuit geometries, the increased use of larger substrates and manufacturers’ increased desire for integrated processing equipment, will make highly automated and integrated systems, including single substrate processing systems, more important to customers. For assistance in our development efforts, we maintain relationships with our customers and industry consortium, who help identify and analyze industry trends and assess how our development activities meet the industry’s advanced technology needs.

 

Our current research and development programs are focused on creating new processes and technologies for cleaning substrates without damaging the increasingly smaller patterned features being used for the most advanced IC devices. We are also conducting programs to increase process control and flexibility through monitoring and software management systems and process automation, robotics automation in the cleanroom, and integration of our product offerings with other suppliers’ products. Each of these programs involves collaboration with customers and other equipment manufacturers to ensure proper machine configuration and process development to meet industry requirements.

 

We maintain an 8,000-square-foot, state-of-the-art demonstration and process development laboratory for our SC business at our Chaska, Minnesota facility. In addition, we lease 2,500 square feet of laboratory and office space in Allen, Texas.

 

Expenditures for research and development, which are expensed as incurred, during fiscal 2007 were approximately $24.1 million, representing 20.7% of total sales. Expenditures for research and development during fiscal 2006 were approximately $24.3 million, representing 21.5% of total sales, and expenditures for research and development during fiscal 2005 were approximately $22.1 million, representing 25.6% of total sales.

 

We expect to continue to make substantial investments in research and development.* We also recognize the importance of managing product transitions successfully, as the introduction of new products could adversely affect sales of existing products.

 

Marketing, Sales and Support

 

We market our products worldwide to manufacturers of microelectronic devices. Our marketing and sales efforts are focused on building long-term collaborative relationships with our customers. These efforts are supported by marketing, sales, and service personnel, along with applications engineers. These worldwide FSI

teams work collaboratively with individual IC manufacturers, in FSI process laboratories and at customer sites, to integrate FSI developed product and process innovations into customer process flows and optimize them according to customer priorities.

 

As of the end of fiscal 2007, our sales effort was supported by approximately 130 employees and contractors engaged in customer service and support. During fiscal 2007, we directly sold and serviced our products in North America, Europe and the Asia Pacific region, and through m•FSI, LTD in Japan.

 

By providing a full portfolio of direct support services, we have developed stronger customer relationships and our customers are beginning to show greater interest in expanding beyond their current use of FSI traditional spray cleaning technologies to include new FEOL, BEOL and wafer bumping applications for spray, as well as employing our advanced immersion and CryoKinetic technologies. Our increased responsiveness on the local level has resulted in more collaborative efforts and joint development programs with IC makers throughout the world for 90nm production and 65 and 45nm development projects.

 

International sales accounted for approximately 69% of total sales in fiscal 2007, 62% of total sales in fiscal 2006, and 64% of total sales in fiscal 2005.

 

Manufacturing, Raw Materials and Suppliers

 

We maintain manufacturing facilities in Chaska, Minnesota and Allen, Texas. We typically assemble our products and systems from components and prefabricated parts manufactured and supplied by others, including process controllers, robots, integrated circuits, power supplies, stainless steel pressure vessels, chamber bowls, valves and relays. Certain items manufactured by third parties are custom-made to our specifications. Typically, final assembly and systems tests are performed by our manufacturing personnel. Quality control is maintained through quality assurance programs with suppliers, incoming inspection of components, in-process inspection during equipment assembly, and final inspection and operation of manufactured equipment prior to shipment. We have a company-wide quality program in place and received ISO 9001 certification in 1994 and ISO 9000:2000 certification in 2003.

 

Certain of the components and subassemblies included in our products are obtained from a single supplier or a limited group of suppliers to ensure overall quality and delivery timeliness. We purchased 10% of our fiscal 2007 inventory purchases, 13% of our fiscal 2006 inventory purchases and 11% of our fiscal 2005 inventory purchases from Custom Fab Solutions. We purchased 10% of our fiscal 2006 inventory purchases from Entegris, Inc. Although we seek to reduce dependence on sole and limited-source suppliers, disruption or termination of certain of our inventory sources could have a temporary adverse effect on our operations. We believe that alternative sources could be obtained and qualified to supply these products, if necessary, but that production delays would likely occur in some cases.* Further, a prolonged inability to obtain certain components could have an adverse effect on our operating results, delay scheduled deliveries and result in damage to customer relationships.

 

Competition

 

The semiconductor equipment industry is very competitive and marked by continuous technological challenges. Significant competitive factors in the equipment market include system price, which encompasses total cost of ownership, quality, process performance, reliability, flexibility, extendibility, integration with other products, process or tool of record, and customer support.

 

Many of our established competitors have greater financial, engineering, research, development, manufacturing, marketing, service and support resources. To remain competitive, we must invest in research and development, marketing, customer service and support programs, and also manage our operating expenses. We cannot assure that we will have sufficient resources to continue to make these investments or that our products will continue to be viewed as competitive as a result of technological advances by existing or new competitors or due to changes in semiconductor technology.

 

Our SC products compete with, among others, DaiNippon Screen Manufacturing Co. Ltd., Kaijo Denki, S.E.S. Co., Ltd., Semitool, Inc., The SEZ Group, Tokyo Electron Ltd. and several smaller companies. Our PSS

organization competes with various small equipment refurbishment, equipment maintenance and spare parts providers.

 

Customers

 

We sell products from one or more of our product lines to most major microelectronics manufacturers. We have an extensive history of sales to several of the largest integrated circuit manufacturers and over 100 active customers worldwide. The loss of any of these customers could have a material adverse effect on our operations. The following customers accounted for 10% or more of our total sales in fiscal 2007, 2006 and 2005 as follows:

 

 

 

 

We have experienced, and expect to continue to experience, fluctuations in our customer mix.* The timing of an order for our equipment is primarily dependent upon the customer’s expansion program, replacement needs, or requirements to improve productivity and yields. Consequently, a customer who places significant orders in one year will not necessarily place significant orders in subsequent years.

 

Under the new m•FSI distribution agreement entered into on May 15, 2007, m•FSI has exclusive distribution rights for five years with respect to our SC products in Japan. The distribution agreement with m•FSI may be terminated only upon the occurrence of certain events or conditions or as otherwise mutually agreed or at the end of the initial five-year term. There is no current obligation under the distribution agreement for m•FSI to purchase a specified amount or percentage of our products. However, a minimum purchase obligation is imposed on m•FSI beginning in fiscal 2009.

 

Patents, Trademarks and Intellectual Property

 

Our success depends upon a variety of factors, including proprietary technology. It is important to protect our technology by obtaining and enforcing patents. Consequently, we have an active program to file patent applications in the United States and other countries on inventions we consider significant. We also possess other proprietary intellectual property, including trademarks, know-how, trade secrets and copyrights. We also protect our proprietary information through confidentiality agreements with our employees and various third parties.

 

We have a number of patents in the United States and other countries, with additional applications pending. These patents may be challenged, invalidated or circumvented, or may not provide any competitive advantages to us. Pending applications may not result in patents and the claims allowed in future patents may not be sufficiently broad to protect our technology. The laws of some foreign countries may not permit the protection of our proprietary rights to the same extent as under the laws of the United States. Although we believe that the protections afforded by our patents, patent applications, and other intellectual property rights have value. Because of rapidly changing technology, our future success depends on the skills of our employees.

 

In the normal course of business, we occasionally receive and make inquiries about possible patent infringement. In dealing with such inquiries, it may be necessary or useful for us to obtain or grant licenses or other rights. However, we cannot assure that such license rights will be available to us on commercially reasonable terms, or even at all. The inability to obtain certain license or other rights, or to obtain such

licenses or rights on favorable terms, or the need to engage in litigation could have a material adverse effect on us.

 

We offer our microlithography POLARIS system pursuant to a non-exclusive license from Texas Instruments Incorporated (“TI”). We have converted the license to a fully paid-up, worldwide license to sell and manufacture the POLARIS system. We also have the non-exclusive right to manufacture and sell related TI modules. The license agreement with TI continues until terminated. It may be terminated by either party upon a breach by the other, and the failure to cure, in accordance with the terms of the agreement.

 

We offer our SC ANTARES CX Cleaning System under license agreements from IBM. The licenses require certain minimum and system-based royalties. Royalties are based on the “royalty portion revenues” of licensed equipment that excludes amounts for freight, taxes, customers’ duties, insurance, discounts, and certain equipment not manufactured by us.

 

We have approximately 95 U.S. patents. Expiration dates range from February 2008 to February 2024. In addition, we have approximately 30 pending U.S. patent applications in various stages of the patent examination process.

 

Employees

 

As of August 25, 2007, we had approximately 429 full and part-time employees. Competition for highly skilled employees is intense. We believe that a great part of our future success depends upon our continued ability to retain and attract qualified employees. We are not subject to any collective bargaining agreements in the United States and have never been subject to a work stoppage. We are subject to collective bargaining agreements in Italy and France covering approximately 25 employees. We have never been subject to a work stoppage in Italy or France.

 

Environmental Matters

 

In January 2003, we received our certificate of registration from BSI Management Systems, an independent business services organization that certifies management systems and products, for its ISO 14001 environmental management system. ISO 14001 is an internationally recognized environmental management standard that empowers organizations to address the environmental impact of its activities, services and processes. The standard then provides a framework for enterprises to take steps to identify issues significant to them and implement environmental management programs to achieve improved performance. Registration with ISO 14001 allows companies to reaffirm that environmental processes are essential components of their business strategy. We have a long history of environmentally-friendly practices including research and development programs that actively seek ways to operate more environmentally efficient. We registered with ISO 14001 to emphasize our ongoing commitment to the preservation and protection of the environment, and to support existing environmental health and safety initiatives.

 

We implemented an enterprise-wide program to actively engage our employees to develop ways to, and to emphasize the importance of, protecting the environment in everyday life at FSI. Our programs include recycling, water use reductions, chemical handling processes and equipment design for the environment.

 

We are subject to a variety of governmental regulations related to the discharge or disposal of toxic, volatile or otherwise hazardous chemicals used in the manufacturing and product development process. We believe we are in compliance with these regulations and that we have obtained all necessary environmental permits to conduct our business. These permits generally relate to the disposal of hazardous wastes. If we fail to comply with present or future regulations, fines could be imposed, production and product development could be suspended, or operations could cease. Such regulations could require us to acquire significant equipment or take other actions necessary to comply with environmental regulations at a potentially significant cost. If we fail to control the use of, or adequately restrict the discharge and disposal of, hazardous substances, we could incur future liabilities.

We believe that compliance with federal, state and local provisions regulating the discharge of materials into the environment, or otherwise relating to the protection of the environment, will not have a material effect upon our capital expenditures, earnings or competitive position.*

 

International Sales

 

Our international sales for each of the last three fiscal years are disclosed in the financial statements included in Item 8 of this report.

 

Available Information

 

Our annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K, and amendments to those reports filed or furnished pursuant to Section 13(a) or 15(d) of the Exchange Act of 1934 are available free of charge through our website at www.fsi-intl.com as soon as reasonably practicable after such reports have been filed with or furnished to the Securities and Exchange Commission.

 

 

Our business faces significant risks. The risks described below are not the only risks we face. Additional risks and uncertainties not presently known to us or that we currently believe are immaterial also may impair our business operations. If any of the events or circumstances described in the following risks occurs, our business, operating results or financial condition could be materially adversely affected. The following risk factors should be read in conjunction with the other information and risks set forth in this report.

 

Because our business depends on the amount that manufacturers of microelectronics spend on capital equipment, downturns in the microelectronics industry may adversely affect our results.

 

The microelectronics industry experiences periodic downturns, which may have a negative effect on our sales and operating results. Our business depends on the amounts that manufacturers of microelectronics spend on capital equipment. The amounts they spend on capital equipment depend on the existing and expected demand for semiconductor devices and products that use semiconductor devices. When a downturn occurs, some semiconductor manufacturers experience lower demand and increased pricing pressure for their products. As a result, they are likely to purchase less semiconductor processing equipment and have sometimes delayed making decisions to purchase capital equipment. In some cases, semiconductor manufacturers have canceled or delayed orders for our products. Typically, the semiconductor equipment industry has experienced more pronounced decreases in net sales than the semiconductor industry as a whole.

 

Since early calendar 2007, we, along with others in the semiconductor equipment industry, have experienced a downturn in orders for new equipment as well as delays in existing orders, primarily from logic and flash memory manufacturers. We cannot predict the extent and length of the current downturn in orders and the overall softening in the industry in these segments. In addition:

 

 

Our licensing practices related to international spare parts sales may subject us to fines and could reduce our ability to be competitive in certain countries.

 

In addition to offering our customers microelectronics manufacturing equipment, we provide replacement spare parts, spare part kits and assemblies. In late calendar 2006, we determined that certain of our replacement valves, pumps and heaters could fall within the scope of United States export licensing regulations to products that could be used in connection with chemical weapons processes. We determined that these

regulations require us to obtain licenses to ship some of our replacement spare parts, spare part kits and assemblies to customers in certain controlled countries as defined in the export licensing regulations. During the second quarter of fiscal 2007, we were granted licenses to ship replacement spare parts, spare parts kits and assemblies to all customers in the controlled countries where we currently conduct business.

 

The applicable export licensing regulations frequently change. Moreover, the types and categories of products that are subject to export licensing are often described in the regulations in general terms and could be subject to differing interpretations.

 

In the second quarter of fiscal 2007, we made a voluntary disclosure to the United States Department of Commerce to clarify our licensing practices and to review our practices with respect to prior sales of certain replacement valves, pumps and heaters to customers in several controlled countries as defined in the licensing regulations.

 

The United States Department of Commerce could assess penalties for any past violation of export control regulations. The licenses that were granted do not mitigate our risk with respect to past violations.

 

Failure of our products to gain market acceptance would adversely affect our financial condition.

 

We believe that our growth prospects depend upon our ability to gain customer acceptance of our products and technology, particularly newly developed products. Market acceptance of products depends upon numerous factors, including:

 

 

Moreover, manufacturers often rely on a limited number of equipment vendors to meet their manufacturing equipment needs. As a result, market acceptance of our products may be affected adversely to the extent potential customers utilize a competitor’s manufacturing equipment. There can be no assurance that sales of new products will remain constant or grow or that we will be successful in obtaining broad market acceptance of our systems and technology.

 

We expect to spend a significant amount of time and resources to develop new systems and enhance existing systems. In light of the long product development cycles inherent in our industry, we will make these expenditures well in advance of the prospect of deriving revenue from the sale of any new systems. Our ability to commercially introduce and successfully market any new systems is subject to a wide variety of challenges during this development cycle, including start-up bugs, design defects and other matters that could delay introduction of these systems to the marketplace. In addition, since our customers are not obligated by long-term contracts to purchase our systems, our anticipated product orders may not materialize or orders that do materialize may be canceled. As a result, if we do not achieve market acceptance of new products, we may not be able to realize sufficient sales of our systems in order to recoup research and development expenditures. The failure of any of our new products, for example the MAGELLAN^®, to achieve market acceptance would harm our business, financial condition, and results of operations and cash flows.

 

If we do not continue to develop new products, we will not be able to compete effectively.

 

Our business and results of operations could decline if we do not develop and successfully introduce new or improved products that the market accepts. The technology used in microelectronics manufacturing equipment and processes changes rapidly. Industry standards change constantly and equipment manufacturers frequently introduce new products. We believe that microelectronics manufacturers increasingly rely on equipment manufacturers like us to:

 

 

 

To compete, we must continue to develop, manufacture, and market new or improved products that meet changing industry standards. To do this successfully, we must:

 

 

Product or process development problems could harm our results of operations.

 

Our products are complex, and from time to time have defects or bugs that are difficult and costly to fix. This can harm our results of operations in the following ways:

 

 

As a result, we may have to write off inventory and other assets related to products and could lose customers and revenue. There is no assurance that we will be successful in preventing product and process development problems that could potentially harm our results of operations.

 

It may be difficult for us to compete with stronger competitors resulting from industry consolidation.

 

In the past several years, we have seen a trend toward consolidation in the microelectronics equipment industry. We expect the trend toward consolidation to continue as companies seek to strengthen or maintain their market positions in a rapidly changing industry.* We believe that industry consolidations may result in competitors that are better able to compete. This could have a significant negative impact on our business, operating results, and financial condition.

 

Future acquisitions may dilute our shareholders’ ownership interests and have other adverse consequences.

 

Because of consolidations in the semiconductor equipment industry we serve and other competitive factors, our management will seek to acquire additional product lines, technologies, and businesses if suitable opportunities develop. Acquisitions may result in the issuance of our stock, which may dilute our shareholders’ ownership interests and reduce earnings per share. Acquisitions also may increase debt levels and the related goodwill and other intangible assets, which could have a significant negative effect on our financial condition and operating results. In addition, acquisitions involve numerous risks, including:

 

 

Because of the volatility of our stock price, the ability to trade FSI shares may be adversely affected and our ability to raise capital through future equity financing may be reduced.

 

Our stock price has been volatile in the past and may continue to be so in the future. In fiscal 2007, our stock price ranged from $2.13 to $6.90 per share and in fiscal 2006, our stock price ranged from $3.72 to $7.18 per share.

 

The trading price of our common shares is subject to wide fluctuations in response to various factors, some of which are beyond our control, including factors discussed elsewhere in this report, and the following:

 

 

The prices of technology stocks, including ours, have been particularly affected by extreme fluctuations in price and volume in the stock market generally. These broad stock market fluctuations may have a negative effect on our future stock price.

 

In the past, securities class action litigation has often been brought against a company following periods of volatility in the market price of its securities. In the future we could be the target of this type of litigation. Securities litigation may result in substantial costs and divert management’s attention and resources, which can seriously harm our business.

 

Because our quarterly operating results are volatile, our stock price could fluctuate.

 

In the past, our operating results have fluctuated from quarter to quarter and are likely to do so in the future. These fluctuations may have a significant impact on our stock price. The reasons for the fluctuations in our operating results, such as sales, gross profits, and net income, include:

 

 

As a result of these factors, our future operating results are difficult to predict. Further, we base our current and future expense plans in significant part on our expectations of our longer-term future revenue. As a result, we expect our expense levels to be relatively fixed in the short-run. An unanticipated decline in revenue for a particular quarter may disproportionately affect our net income in that quarter. If our revenue is below our projections, then our operating results will also be below expectations. Any one of the factors we list above, or a combination of them, could adversely affect our quarterly results of operations, and consequently may cause a decline in our share price.

 

Changes in demand caused by fluctuations in interest and currency exchange rates may reduce our international sales.

 

Almost all of our direct international sales are denominated in U.S. dollars. Nonetheless, changes in demand caused by fluctuations in interest and currency exchange rates may affect our international sales. We have direct sales, service and applications support and logistics responsibilities for our products in Europe and the Asia Pacific region, and accordingly, we incur labor, service and other expenses in foreign currencies. As of August 25, 2007, we had not entered into any hedging activities and our foreign currency transaction gains and losses for fiscal 2007 were insignificant. We intend to evaluate various hedging activities and other options to minimize fluctuations in interest and currency exchange rates. There is no assurance that we will be successful in minimizing foreign exchange rate risks and such failure may reduce our international sales or negatively impact our operating results.

 

Because of the need to meet and comply with numerous foreign regulations and policies, the potential for change in the political and economic environments in foreign jurisdictions and the difficulty of managing business overseas, we may not be able to sustain our historical level of international sales.

 

We operate in a global market. In fiscal 2007, approximately 69% of our sales revenue derived from sales outside of the United States. In fiscal 2006, approximately 62% of our sales revenue derived from sales outside the United States. In fiscal 2005, approximately 64% of our sales revenue derived from sales outside the United States. We expect that international sales will continue to represent a significant portion of total sales.* Sales to customers outside the United States involve a number of risks, including the following:

 

 

In particular, the Japanese and Asia Pacific markets are extremely competitive. The semiconductor device manufacturers located there are very aggressive in seeking price concessions from suppliers, including equipment manufacturers like us.

 

We seek to meet technical standards imposed by foreign regulatory bodies. However, we cannot guarantee that we will be able to comply with those standards in the future. Any failure by us to design products to comply with foreign standards could have a significant negative impact on us.

Because of the significant financial resources needed to offer a broad range of products, to maintain customer service and support and to invest in research and development, we may be unable to compete with larger, better established competitors.

 

The microelectronics equipment industry is highly competitive. We face substantial competition throughout the world. We believe that to remain competitive, we will need significant financial resources to offer a broad range of products, to maintain customer service and support, and to invest in research and development. We believe that the microelectronics industry is becoming increasingly dominated by large manufacturers who have the resources to support customers on a worldwide basis. Some of our competitors have substantially greater financial, marketing, and customer-support capabilities than us. Large equipment manufacturers have or may enter the market areas in which we compete. In addition, smaller, emerging microelectronics equipment companies provide innovative technology. We expect that our competitors will continue to improve the design and performance of their existing products and processes. We also expect them to introduce new products and processes with better performance and pricing. We cannot guarantee that we will continue to compete effectively in the United States or elsewhere. We may be unable to continue to invest in marketing, research and development and engineering at the levels we believe necessary to maintain our competitive position. Our failure to make these investments could have a significant negative impact on our business, operating results and financial condition.

 

Manufacturing interruptions or delays could affect our ability to meet customer demand, while the failure to estimate customer demand accurately could result in excess or obsolete inventory.

 

Our business depends on its ability to supply equipment, services and related products that meet the rapidly changing requirements of its customers, which depends in part on the timely delivery of parts, components and subassemblies (collectively, parts) from suppliers. Some key parts may be subject to long lead-times and/or obtainable only from a single supplier or limited group of suppliers. Significant interruptions of manufacturing operations or the delivery of services could result in delayed deliveries to our customers, manufacturing inefficiencies, increased costs or order cancellations as a result of:

 

 

Moreover, if actual demand for our products is different that expected, we may purchase more/fewer parts than necessary or incur costs for canceling, postponing or expediting delivery of parts. Any or all of these factors could materially and adversely affect our business, financial condition and results of operations.

 

Because we do not have long-term sales commitments with our customers, if these customers decide to reduce, delay or cancel orders or choose to deal with our competitors, then our results will be adversely affected.

 

If our significant customers reduce, delay, or cancel orders, then our operating results could suffer. Our largest customers have changed from year to year, however, sales to our top five customers accounted for approximately 42% of total revenues in fiscal 2007, 52% of total revenues in fiscal 2006 and 48% of total revenues in fiscal 2005. Samsung Electronics accounted for approximately 13% of our total sales in fiscal 2007 and 11% of our total sales in fiscal 2006 and 2005. Intel Corporation accounted for approximately 11% of our total sales in fiscal 2007. ST Microelectronics accounted for approximately 14% of total sales in fiscal

2006. Texas Instruments Incorporated accounted for approximately 13% of total sales in fiscal 2006 and 14% of total sales in fiscal 2005. Seagate Technology, Inc. accounted for approximately 11% of total sales in fiscal 2006. We currently have no long-term sales commitments with any of our customers. Instead, we generally make sales under purchase orders. All orders are subject to cancellation or delay by the customer.

 

Our backlog may not result in future net sales.

 

We schedule the production of our systems based in part upon order backlog. Due to possible customer changes in delivery schedules and cancellations of orders, our backlog at any particular date is not necessarily indicative of actual sales for any succeeding period. In addition, while we evaluate each customer order on a case by case basis to determine qualification for inclusion in backlog, there can be no assurance that amounts included in backlog ultimately will result in future sales. A reduction in backlog during any particular period, or the failure of our backlog to result in future sales, could harm our business.

 

Because we depend upon our management and technical personnel for our success, the loss of key personnel could place us at a competitive disadvantage.

 

Our success depends to a significant extent upon our management and technical personnel. The loss of a number of these key persons could have a negative effect on our operations. Competition is high for such personnel in our industry in all of our locations. We periodically review our compensation and benefit packages to ensure that they are competitive in the marketplace and make adjustments or implement new programs for that purpose, as appropriate. We cannot guarantee that we will continue to attract and retain the personnel we require to continue to grow and operate profitably.

 

Our employment costs in the short-term are to a large extent fixed, and therefore any unexpected revenue shortfall could adversely affect our operating results.

 

Our operating expense levels are based in significant part on our headcount, which generally is driven by longer-term revenue goals. For a variety of reasons, particularly the high cost and disruption of lay-offs and the costs of recruiting and training, our headcount in the short-term is, to a large extent, fixed. Accordingly, we may be unable to reduce employment costs in a timely manner to compensate for any unexpected revenue or gross margin shortfall, which could have a material adverse effect on our operating results.

 

Because our intellectual property is important to our success, the loss or diminution of our intellectual property rights through legal challenge by others or from independent development by others, could adversely affect our business.

 

We attempt to protect our intellectual property rights through patents, copyrights, trade secrets, and other measures. However, we believe that our financial performance will depend more upon the innovation, technological expertise, and marketing abilities of our employees than on such protection. In connection with our intellectual property rights, we face the following risks:

 

 

As is typical in the semiconductor industry, we occasionally receive notices from others alleging infringement claims. We have been involved in patent infringement litigation in the past and we could become involved in similar lawsuits or other patent infringement claims in the future. We cannot guarantee the outcome of such lawsuits or claims, which may have a significant negative effect on our business or operating results.

We are currently exposed to various risks related to legal proceedings or claims.

 

We have in the past and may in the future be involved in legal proceedings or claims regarding patent infringement, intellectual property rights, contracts and other matters. These legal proceedings and claims, whether with or without merit, could be time-consuming and expensive to prosecute or defend, and could divert management’s attention and resources. There can be no assurance regarding the outcome of future legal proceedings or claims. If we are not able to resolve a claim, negotiate a settlement of the matter, obtain necessary licenses on commercially reasonable terms and/or successfully prosecute or defend its position, our business, financial condition and results of operations could be materially and adversely affected.

 

We generate minor amounts of liquid and solid hazardous waste and use licensed haulers and disposal facilities to ship and dispose of such waste. In the past, we have received notice from state or federal enforcement agencies that we are a potentially responsible party (“PRP”) in connection with the investigation of several hazardous waste disposal sites owned and operated by third parties. In each matter, we have elected to participate in settlement offers made to all de minimis parties with respect to such sites. The risk of being named a PRP is that if any of the other PRPs are unable to contribute their proportionate share of the liability, if any, associated with the site, those PRPs that are financially able could be held financially responsible for the shortfall.

 

There has and continues to be substantial litigation regarding patent and other intellectual property rights in the microelectronics industry. Commercialization of new products or further commercialization of our current products could provoke claims of infringement by third parties. In the future, litigation may be necessary to enforce patents issued to us, to protect trade secrets or know-how owned by us or to defend us against claimed infringement of the rights of others and to determine the scope and validity of our proprietary rights. Any such litigation could result in substantial costs and diversion of our effort, which alone could have a material adverse impact on our financial condition and operating results. Further, adverse determinations in such litigation could result in our loss of proprietary rights, subject us to significant liabilities to third parties, require us to seek licenses from third parties or prevent us from manufacturing or selling one or more products, any of which could have a material adverse effect on our financial condition and results of operations.

 

Certain of our product lines are intended for use with hazardous chemicals. As a result, we are notified by our customers from time to time of incidents involving our equipment that have resulted in a spill or release of a hazardous chemical. We maintain product liability insurance in an effort to minimize our risk. However, in some cases it may be alleged that we or our equipment are at fault. There can be no assurance that any future litigation resulting from such claims would not have a material adverse effect on our business or financial results.

 

Our sales cycle is long and unpredictable, which could require us to incur high sales and marketing expenses with no assurance that a sale will result.

 

Sales cycles for some of our products can run as long as 12 to 18 months. As a result, we may not recognize revenue from efforts to sell particular products for extended periods of time. We believe that the length of the sales cycle may increase as some current and potential customers centralize purchasing decisions into one decision-making entity. We expect this may intensify the evaluation process and require us to make additional sales and marketing expenditures with no assurance that a sale will result.

 

We are subject to internal controls evaluations and attestation requirements of Section 404 of the Sarbanes-Oxley Act of 2002.

 

Pursuant to Section 404 of the Sarbanes-Oxley Act of 2002, we must perform evaluations of our internal controls over financial reporting. Beginning at the end of fiscal 2005 and annually thereafter, we must include with our Form 10-K a report on our management’s assessment of the adequacy of such internal controls, and our independent registered public accounting firm must publicly attest to the effectiveness of our internal controls. Compliance with these requirements is complex and time-consuming. If we fail to timely or successfully comply with the requirements of Section 404, or if our independent registered public accounting

firm does not timely attest to the evaluation, we could be subject to increased regulatory scrutiny and the public’s perception of us may change.

 

Changes to financial accounting standards may affect our reported results of operations.

 

We prepare our financial statements to conform with accounting principles generally accepted in the United States of America (“GAAP”). The GAAP are subject to interpretation by the American Institute of Certified Public Accountants, the Securities and Exchange Commission, the Financial Accounting Standards Board and various bodies formed to interpret and create appropriate accounting standards. A change in those standards can have a significant effect on our reported results and may even affect our reporting of transactions completed before a change is announced.

 

Accounting standards affecting many other aspects of our business, including rules relating to purchase accounting for business combinations, revenue recognition, in-process research and development charges, employee stock purchase plans and stock option grants, have recently been revised or are under review. Changes to those rules or the questioning of our current accounting practices may have a material adverse effect on our reported financial results or on the way we conduct business. In addition, our preparation of financial statements in accordance with GAAP requires that we make estimates and assumptions that affect the recorded amounts of assets and liabilities, disclosure of those assets and liabilities at the date of the financial statement and the recorded amounts of expenses during the reporting period. A change in the facts and circumstances surrounding those estimates could result in a change to our estimates and could impact our future operating results.

 

We do not intend to pay dividends.

 

We have never declared or paid any cash dividends on our common stock. We currently intend to retain any future earnings for funding growth and, therefore, do not expect to pay any dividends in the foreseeable future.

 

 

We do not have any unresolved staff comments.

 

 

We own a 197,000-square-foot facility in Chaska, Minnesota. The facility contains our SC product engineering, manufacturing, sales, administrative and support functions. It includes a research laboratory and 40,000 square feet of Class 1,000 and 10,000 cleanroom space, manufacturing support operations and a customer training center.

 

In February 2005, we sold our 162,000 square foot facility in Allen, Texas. Concurrent with the sale, we entered into a sublease of approximately 45,000 square feet of space in the facility. The lease ends on August 31, 2008; however, we have an option to extend the lease through August 31, 2009.

 

We also maintain small leased sales and service offices throughout Europe and Asia near our customer locations.

 

 

In fall 1995, pursuant to the Employee Stock Purchase and Shareholder Agreement dated November 30, 1990 between Eric C. Hsu and Semiconductor Systems, Inc. (“SSI”) (the “Shareholder Agreement”) and in connection with Mr. Hsu’s termination of his employment with SSI in August 1995, the former shareholders of SSI purchased the shares of SSI common stock then held by Mr. Hsu. In April 1996, we acquired SSI, and SSI became our wholly owned subsidiary. In October 1996, Eric C. and Angie L. Hsu (the “plaintiffs”) filed a lawsuit in the Superior Court of California, County of Alameda, Southern Division, against SSI and the former shareholders of SSI. The plaintiffs alleged that such purchase breached the Shareholder Agreement and

violated the California Corporations Code, breached the fiduciary duty owed plaintiffs by the individual defendants and constituted fraud.

 

In September and October 2000, certain of Mr. Hsu’s claims were tried to a jury in Alameda County Superior Court in Oakland, California. At the conclusion of the trial, the jury found that SSI breached the Shareholder Agreement between it and Mr. Hsu and that the damages that resulted were approximately $2.4 million. In addition, each of the individual defendant shareholders was found liable for conversion, and damages of $4.2 million were awarded. Certain individual defendants were also found to have intentionally interfered with Mr. Hsu’s prospective economic advantage and damages of $3.2 million were awarded. Finally, several individual defendants and SSI were found to have violated certain provisions of the California Corporation Code and damages of $2.4 million were awarded.

 

In proceedings subsequent to the trial, the Court determined that the plaintiffs were entitled to an award against SSI of prejudgment interest on the breach of contract damages (approximately $2.4 million) at 10 percent per annum from October 1996. In addition, the Court awarded plaintiffs approximately $127,000 in costs and approximately $1.8 million in attorneys’ fees against SSI and the individual defendants. On November 16, 2001, the court signed its final judgment reflecting the jury’s awards, interest, attorneys’ fees and costs assessed against each of the defendants.

 

Following the entry of judgment, SSI and the other defendants filed post-trial motions seeking reduction in the jury’s damage awards and/or a new trial. The court denied these post-trial motions and there was no reduction in damages against SSI. Mr. Hsu was awarded an additional $431,000 for attorneys’ fees and expenses incurred since the judgment was rendered in November 2001. Subsequently, SSI and the individual defendants filed an appeal on a variety of grounds, and we posted an appeal bond on behalf of SSI and defendants in the amount of $8.3 million. As part of the posting of the bond, we entered into a letter of credit in the amount of $5.2 million with a surety company. This letter of credit was collateralized with restricted cash of the same amount. The appellate court upheld the original judgment.

 

The total judgment against SSI together with post judgment interest and attorneys’ fees as of February 26, 2005 aggregated approximately $7.9 million. As a result, we recorded a $0.3 million charge in the second quarter of fiscal 2005. We had recorded a total of $3.3 million of charges to operations during fiscal 2002 and fiscal 2004 associated with this litigation. During the third quarter of fiscal 2005, we retired the 250,000 shares of our common stock held in the escrow created at the time of our acquisition of SSI to cover such claims. As the SSI merger was a pooling of interests, we decreased our stockholder’s equity by an amount equal to $3.0 million. On March 28, 2005, we tendered funds totaling approximately $7.9 million to the Hsus via a cashier’s check which we believe was the full judgment amount plus all applicable interest. This included $1.6 million of cash provided by the individual defendants. Subsequently, instead of depositing the cashier’s check, the Hsus filed a motion with the court to enforce the judgment against the appeal bond and we and the individual defendants filed a motion to release the bond. The Hsus cashed the cashiers check in July 2005. In August 2005, the court ruled in our favor and an acknowledgement of full satisfaction of the judgment was filed with the court by the Hsus’ attorneys. The bond was released in August 2005.

 

 

There were no matters submitted to a vote of shareholders during the fourth quarter ended August 25, 2007.

 

 

The executive officers are elected by the board of directors, generally for a term of one year, and serve until their successor is elected and qualified. The following table and discussion contains information regarding our current executive officers.

 

 

 

 

PART II

 

 

Our common stock is traded on the NASDAQ Global Market^sm under the symbol “FSII”. The following table sets forth the highest and lowest daily sale prices, as reported by the NASDAQ Global Market for the fiscal periods indicated:

 

 

There were approximately 500 record holders of our common stock on October 23, 2007.

 

We have never declared or paid cash dividends on our common stock. We currently intend to retain all earnings for use in our business and do not anticipate paying dividends in the foreseeable future.*

 

 

The table that follows presents portions of our consolidated financial statements and are not complete. You should read the following selected consolidated financial data in conjunction with our Consolidated Financial Statements and with “Management’s Discussion and Analysis of Financial Condition and Results of Operations” included elsewhere in this report. The Consolidated Statement of Operations data for the years ended August 25, 2007, August 26, 2006 and August 27, 2005, and the Consolidated Balance Sheet data as of August 25, 2007 and August 26, 2006, are derived from our audited consolidated financial statements, which are included elsewhere in this report. The Consolidated Statements of Operations data for the years ended August 28, 2004 and August 30, 2003 and the Consolidated Balance Sheet data as of August 27, 2005, August 28, 2004 and August 30, 2003 are derived from our audited consolidated financial statements which do not appear in this report. We changed our accounting for stock compensation expense effective August 28, 2005 in accordance with Statement of Financial Accounting Standards “SFAS” No. 123R, “Share-Based Payment.”

 

The historical results presented below are not necessarily indicative of the results to be expected for any future fiscal year or fiscal period.

Selected Historical Financial Data

 

 

 

 

 

 

 

Application of Critical Accounting Policies and Estimates

 

In accordance with Securities and Exchange Commission guidance, those material accounting policies that we believe are the most critical to an investor’s understanding of our financial results and condition and require complex management judgment are discussed below.

 

Our critical accounting policies and estimates are as follows:

 

 

Revenue Recognition

 

We recognize revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the purchase price is fixed or determinable and collectibility is reasonably assured. If our equipment sales involve sales to our existing customers who have previously accepted the same type(s) of equipment with the same type(s) of specifications, we account for the product sales as a multiple element arrangement. Revenue from multiple element arrangements is allocated among the separate accounting units based on the residual method. Under the residual method, the revenue is allocated to undelivered elements based on fair value of such undelivered elements and the residual amounts of revenue allocated to delivered elements. We recognize the equipment revenue upon shipment and transfer of title. The other multiple elements also include installation, service contracts and training. Equipment installation revenue is valued based on estimated service person hours to complete installation and published or quoted service labor rates and is recognized when the installation has been completed and the equipment has been accepted by the customer. Service contract revenue is valued based on estimated service person hours to complete the service and published or quoted service labor rates and is recognized over the contract period. Training revenue is valued based on published training class prices or quoted rates and is recognized when the customers complete the training classes or when a customer-specific training period has expired. The published or quoted service labor rates and training class prices are rates actually charged and billed to our customers.

All other product sales with customer-specific acceptance provisions are recognized upon customer acceptance. Future revenues may be negatively impacted if we are unable to meet customer-specific acceptance criteria. Revenue related to spare part sales is recognized upon shipment or delivery based on the trade terms. Revenues related to maintenance and service contracts are recognized ratably over the duration of such contracts.

 

The timing and amount of revenue recognized depends on whether revenue is recognized upon shipment versus acceptance. For revenue recognized upon acceptance, it is dependent upon when customer-specific criteria are met.

 

Valuation of Long-Lived Assets

 

We assess the impairment of long-lived assets whenever events or changes in circumstances indicate that the carrying amount may not be recoverable, in accordance with FASB SFAS No. 144, “Accounting for the Impairment or Disposal of Long-Lived Assets.” An asset or asset group is considered impaired if its carrying amount exceeds the undiscounted future net cash flow the asset or asset group is expected to generate. If an asset or asset group is considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset exceeds its fair value. If estimated fair value is less than the book value, the asset is written down to the estimated fair value and an impairment loss is recognized.

 

If we determine that the carrying amount of long-lived assets, including intangible assets, may not be recoverable, we measure any impairment based on a projected discounted cash flow method using a discount rate determined by our management to be commensurate with the risk inherent in our current business model or another valuation technique. Net intangible assets and long-lived assets amounted to $20.5 million as of August 25, 2007.

 

Considerable management judgment is necessary in estimating future cash flows and other factors affecting the valuation of long-lived assets, including intangible assets, including the operating and macroeconomic factors that may affect them. We use historical financial information, internal plans and projections and industry information in making such estimates.

 

We did not recognize any impairment charges for our long-lived assets, including intangible assets, during fiscal 2007, 2006 or 2005. While we currently believe the expected cashflows from these long-lived assets, including intangible assets, exceeds the carrying amount, materially different assumptions regarding future performance and discount rates could result in future impairment losses. In particular, if we no longer believe we will achieve our long-term projected sales or operating expenses, we may conclude in connection with any future impairment tests that the estimated fair value of our long-lived assets, including intangible assets, are less than the book value and recognize an impairment charge. Such impairment would adversely affect our earnings.

 

Product Warranty

 

We record a liability for warranty claims at the time of sale. The amount of the liability is based on the trend in the historical ratio of claims to sales, releases of new products and other factors. The warranty periods for new equipment manufactured by us range from six months to two years. Special warranty provisions are also accrued for major rework campaigns. Although management believes the likelihood to be relatively low, claims experience could be materially different from actual results because of the introduction of new, more complex products; competition or other external forces; manufacturing changes that could impact product quality; or as of yet unrecognized defects in products sold.

Warranty provisions, claims and changes in estimates for the fiscal years ended August 25, 2007, August 26, 2006, and August 27, 2005 were as follows (in thousands):

 

 

Inventory Provisions

 

We record provisions for inventory shrinkage and for potentially excess, obsolete and slow moving inventory. The amounts of these provisions are based upon historical loss trends, inventory levels, physical inventory and cycle count adjustments, expected product lives, forecasted sales demand and recoverability. Results could be materially different if demand for our products decreased because of economic or competitive conditions, length of the industry downturn, or if products become obsolete because of technical advancements in the industry or by us.

 

Since we recorded the PSS product inventory provisions as a result of the wind-down of our Microlithography business in the second quarter of fiscal 2003, we have had sales of PSS product inventory that had previously been written down to zero and reductions in inventory buyback requirements of $9.7 million and have disposed of $6.7 million of PSS product inventory. The original cost of PSS product inventory available for sale or to be disposed of as of August 25, 2007 that has been written down to zero was $8.6 million.

 

Allowance for Doubtful Accounts

 

Management must make estimates of the uncollectibility of our accounts receivable. The most significant risk is the risk of sudden unexpected deterioration in the financial condition of a significant customer who is not considered in the allowance. Management specifically analyzes accounts receivable and analyzes historical bad debts, customer concentrations, customer credit-worthiness, current economic trends and changes in our customer payment terms when evaluating the adequacy of the allowance for doubtful accounts. Results could be materially impacted if the financial condition of a significant customer deteriorated and related accounts receivable are deemed uncollectible. Accounts receivable are charged off after management determines that they are uncollectible.

 

A rollforward of the allowance for doubtful accounts for the fiscal years ended August 25, 2007, August 26, 2006 and August 27, 2005 is as follows (in thousands):

 

We collected $55,000 of receivables in fiscal 2007 and $336,000 in fiscal 2006 that had previously been written off resulting in credits to selling, general and administrative expenses.

 

Stock-Based Compensation

 

We implemented the fair value recognition provisions of SFAS No. 123R effective August 28, 2005 using the modified prospective method. Under this method, we recognize compensation expense for all stock-based awards granted on or after August 28, 2005 and for previously granted awards not yet vested as of August 28, 2005. We recorded stock compensation expense of $593,000 in fiscal 2007 and $1.1 million in fiscal 2006.

 

We utilize a Black-Scholes option pricing model to estimate fair value of each award on the date of grant. The Black-Scholes model requires the input of certain assumptions that involve management judgment. Key assumptions that affect the calculation of fair value include the expected life of stock-based awards and our stock price volatility. Additionally, we expense for only those shares expected to vest. The assumptions used in calculating the fair value of stock-based awards and the forfeiture rate of such awards reflect management’s best estimates. However, circumstances may change and additional data may become available over time, which could result in changes to these assumptions that materially impact the fair value determination of future awards or their estimated rate of forfeiture. If factors change and we use different assumptions in the application of SFAS 123R in future periods, the compensation expense recorded under SFAS 123R may differ significantly from the expense recorded in the current period. See Note 14 of Notes to Consolidated Financial Statements for additional information on stock-based compensation.

 

Income Taxes

 

Our effective income tax rate is based on income, statutory tax rates and tax planning opportunities available to us in the various jurisdictions in which we operate. We have established valuation allowances against a portion of the U.S. and non-U.S. net operating losses to reflect the uncertainty of our ability to fully utilize these benefits given the limited carryforward periods permitted by the various jurisdictions. The evaluation of the realizability of our net operating losses requires the use of considerable management judgment to estimate the future taxable income for the various jurisdictions, for which the ultimate amounts and timing of such estimates may differ. The valuation allowance can also be impacted by changes in the tax regulations.

 

Significant judgment is required in determining our contingent tax liabilities. We have established contingent tax liabilities using management’s best judgment and adjust these liabilities as warranted by changing facts and circumstances. A change in our tax liabilities in any given period could have a significant impact on our results of operations and cash flows for that period.

 

Industry Update

 

Gartner Group, a leading research organization, is forecasting that demand for semiconductors will increase approximately 4 percent to $273 billion in calendar 2007 from $263 billion in the prior year.* The increase is being driven by memory and microprocessor device demand. Semiconductor demand is forecasted by Gartner Group to grow approximately 8 percent to $295 billion in calendar 2008.*

 

Total equipment spending in calendar 2007 is expected by Gartner Group to increase approximately 4 percent to $43.7 billion as compared to $42.0 billion in 2006.* Currently analysts have a mixed view on calendar 2008 forecasted equipment spending, ranging from a significant decline to a modest increase. Gartner Group is forecasting equipment spending to be flat in calendar 2008 as compared to calendar 2007 as spending on memory device manufacturing capacity levels off to recover from the current overcapacity.*

 

When compared to prior cycles, device manufacturers are managing capacity increases carefully and acting quickly to delay new equipment purchases in response to slowing demand to prevent an inventory build-up. The current inventory levels support a cautious investment posture for device manufacturers. We believe that equipment spending will gradually improve each quarter throughout calendar 2008.*

With one or more of our flagship products placed at many of the top semiconductor device manufacturers, including a number of the memory suppliers, we remain optimistic with respect to our future growth opportunities. Assuming that we execute on existing and new tool evaluations, we believe we are in position to participate if and when leading device manufacturers add capacity in calendar 2008, especially at the 65 nm and lower technology nodes.*

 

Overview

 

According to Semiconductor Equipment and Materials International, or SEMI, a well known industry trade group:

 

 

In response to this dramatic order decline in our served market we implemented cost reduction actions in March 2007 and again in the fourth quarter of fiscal 2007. With our headcount now down nearly 25 percent from the fiscal 2007 peak in January 2007 and a lower cost structure in place, we are focused on revenue growth and margin improvement.

 

During fiscal 2007, we expanded our presence in Asia and added two top memory device manufacturers to our growing list of leading device producers for advanced applications. We continued to place our flagship products at customers for evaluations and anticipate acceptance of these systems and follow-on orders in fiscal 2008.*

 

In fiscal 2007, we nearly doubled the throughput, number of silicon wafers processed per hour, of our MAGELLAN immersion cleaning system and improved its overall reliability and process performance. We released and placed initial ZETA batch spray processing systems running our enhanced ViPR technology. During fiscal 2007, we progressed with platform and applications development for our single wafer wet product. We expect to place several evaluation systems at customers during fiscal 2008.*

 

In the third quarter of fiscal 2007, we completed the restructuring of our contractual relationship with m•FSI LTD. We now own all intellectual property rights to the technology we supply to customers in Japan and have a five year exclusive, performance-based distribution arrangement with m•FSI. After selling a portion of our equity ownership to several financial investors and m•FSI management, we now own 20 percent of m•FSI.

 

Results of Operations

 

Sales Revenue and Shipments

 

Fiscal 2007 sales revenue increased to $116.2 million as compared to $113.2 million in fiscal 2006. The increase in sales in fiscal 2007 related to an increase in international sales of $9.3 million, partially offset by a $6.3 million decrease in domestic sales. Fiscal 2006 sales revenues increased 31% to $113.2 million as compared to $86.4 million in fiscal 2005. Sales increased in fiscal 2006 as compared to fiscal 2005 in all regions with increases in Asia of $12.3 million and the United States of $11.6 million related primarily to improved industry conditions.

 

Shipments were $116.9 million in fiscal 2007 as compared to $109.7 million in fiscal 2006 and $87.6 million in fiscal 2005.

 

Based upon our revenue recognition policy, certain shipments to customers are not recognized until customer acceptance. Therefore, depending on timing of shipments and customer acceptances, there are time periods where shipments may exceed sales revenue or due to timing of acceptances, sales revenue may exceed shipments.

International sales were $79.6 million for fiscal 2007, representing 69% of total sales during fiscal 2007, $70.4 million for fiscal 2006, representing 62% of total sales during fiscal 2006, and $55.1 million for fiscal 2005, representing 64% of total sales during fiscal 2005. The increase in fiscal 2007 international sales was related to increases in Asia and Europe. The dollar increase in international sales revenue in fiscal 2006 as compared to fiscal 2005 was due to increases in all regions due to improved industry conditions, with the most significant increase in Asia. Due to its broader customer base, SC products have a higher percentage of international sales than PSS products. See Note 16 of the Notes to Consolidated Financial Statements for additional information regarding the Company’s international sales.

 

We ended fiscal 2007 with a backlog of approximately $15.2 million as compared to $39.8 million at the end of fiscal 2006. Backlog consists of orders with delivery dates within the next 12 months for which a customer purchase order has been received. Because of the timing and relative size of orders and the possibility of cancellations or customer delays, backlog is not necessarily indicative of sales for future periods.

 

We expect first quarter fiscal 2008 orders to be between $17 million and $21 million.* This assumes the receipt of several follow-on orders that are anticipated late in the quarter.* We expect first quarter fiscal 2008 revenue to be in the range of $22 million to $25 million.* Achieving the high end of the revenue range is subject to us receiving purchase orders and obtaining timely acceptance from customers.

 

Gross Margin

 

Our gross profit margin fluctuates due to a number of factors, including the mix of products sold; the geographic mix of products sold, with international sales generally having lower gross profit than domestic sales; initial product placement discounts; utilization of manufacturing capacity; sales of PSS product inventory previously written down to zero; and the competitive pricing environment.

 

Gross margin as a percentage of sales was 40.5% for fiscal 2007 as compared to 46.7% for fiscal 2006 and 46.3% for fiscal 2005. The decrease in gross margins from fiscal 2006 to fiscal 2007 related to:

 

 

The increase in gross margins from fiscal 2005 to fiscal 2006 related to an increase in the amount of the original cost of PSS product inventory sold that has been written down to zero from $0.5 million in fiscal 2005 to $2.1 million in fiscal 2006, as well as an increase in our capacity utilization associated with higher shipment levels of $109.7 million in fiscal 2006 as compared to $87.6 million in fiscal 2005. The increases were partially offset by lower margins on flagship products that were sold at a discount in order to gain market entry.

 

We will continue to try to sell the PSS product inventory that had previously been written down to zero to our customers as spares, refurbished systems and upgrades to existing systems. If unsuccessful, some of the items will be disposed. Any material sales of the impaired inventory will be disclosed.

 

We expect the gross profit margins for the first quarter of fiscal 2008 to be between 40% to 42% of revenues, due to an anticipated change in product mix, as approximately 20% of our anticipated revenues are expected to be derived from our lower margin MAGELLAN product.* Our factory utilization rate is not expected to change significantly.*

 

Selling, General and Administrative Expenses

 

Selling, general and administrative expenses in fiscal 2007 were $34.5 million, or 29.7% of total sales, as compared to $36.2 million, or 32.0% of total sales, in fiscal 2006 and $35.3 million, or 40.9% of total sales,

in fiscal 2005. The decrease in selling, general and administrative expenses in fiscal 2007 as compared to fiscal 2006 related primarily to savings associated with cost reduction efforts associated with headcount reductions, partially offset by $0.9 million of severance costs. The increase in the dollar amount of selling, general and administrative expenses in fiscal 2006 as compared to fiscal 2005 related to $0.7 million of stock compensation expense which was new in fiscal 2006, depreciation of our CRM system and increased sales and marketing expenses due to higher sales.

 

Selling, general and administrative expenses for the first quarter of fiscal 2008 are expected to be in the range of $7.4 million to $7.6 million, as we experience a full quarter of benefit from the cost reduction actions we took in the fourth quarter of fiscal 2007.*

 

Research and Development Expenses

 

Research and development expenses for fiscal 2007 were $24.1 million, or 20.7% of total sales, as compared to $24.3 million, or 21.5% of total sales, in fiscal 2006 and $22.1 million, or 25.6% of total sales, in fiscal 2005. The decrease in fiscal 2007 as compared to fiscal 2006 related primarily to cost reduction efforts associated with headcount reductions, partially offset by $0.6 million of severance costs. The increase in fiscal 2006 as compared to fiscal 2005 related primarily to our broadening the application capabilities of our products and supporting initial product placements at customers. In addition, we experienced an increase in engineering costs as we prepared for and shipped our first single wafer wet cleaning system in the fourth quarter of fiscal 2006.

 

We expect research and development expenses to range from $4.7 million to $4.9 million for the first quarter of fiscal 2008, as we continue to invest in new application and product development programs and support production of our single wafer wet product.*

 

Gain on Sale of Facility

 

We sold our facility in Allen, Texas in the second quarter of fiscal 2005 and received $14.4 million in net cash proceeds from the sale. The building and property, plant and equipment sold had a financial statement carrying amount of approximately $7.5 million at the close of the sale. We recorded a gain of $7.0 million on the sale in the second quarter of fiscal 2005. See Note 2 of the Notes to Consolidated Financial Statements for a discussion on the sale of this facility.

 

Gain on Marketable Securities

 

Gain on marketable securities was $5.8 million in fiscal 2005. The gain resulted from the Nortem (formerly Metron Technology) distributions in the third and fourth quarters of fiscal 2005. See Note 9 of the Notes to Consolidated Financial Statements for a discussion on the distributions from Nortem.

 

Impairment and Loss on Sale of Investment

 

We recorded $4.1 million of impairment and loss on the sale of investment in fiscal 2007 related to transactions with m•FSI LTD. See further discussion related to the transactions and the impairment at Note 4 of the Notes to Consolidated Financial Statements.

 

We recorded a $0.5 million impairment of an investment in fiscal 2006. We had an investment in a Malaysian foundry that was accounted for under the cost method. The investment was $0.5 million as of August 27, 2005. On March 22, 2006, the majority shareholder of this Malaysian foundry announced that the foundry would merge with another foundry and form a new entity. Subsequent to the merger announcement, we were contacted by the majority shareholder and given the option of selling our shares at a nominal value to the majority shareholder or providing additional debt to the foundry as part of a pre-merger restructuring. Based on this information, we deemed the investment as being fully impaired as of February 25, 2006 and recorded a loss of $0.5 million in the second quarter of fiscal 2006. We sold our shares in the foundry at a nominal value to the majority shareholder during the third quarter of fiscal 2006.

Income Tax Expense

 

We recorded income tax expense of $122,000 in fiscal 2007 and $50,000 in fiscal 2006 and 2005, primarily as a result of foreign and state taxes.

 

Our deferred tax assets on the balance sheet as of August 25, 2007 have been fully reserved for with a valuation allowance. We do not expect to reduce our valuation allowance until we are consistently profitable on a quarterly basis.*

 

We have net operating loss carryforwards for federal income tax purposes of approximately $153.0 million at August 25, 2007, which will begin to expire in fiscal 2011 through fiscal 2028 if not utilized. Of this amount, approximately $15.0 million is subject to Internal Revenue Code Section 382 limitations on utilization, which limits the amount that we can offset taxable income to approximately $1.4 million per year.

 

Equity in Earnings (Loss) of Affiliate

 

Equity in earnings (loss) of affiliates was approximately $27,000 for fiscal 2007, ($274,000) for fiscal 2006 and $450,000 for fiscal 2005. The losses in fiscal 2006 related primarily to a decrease in m•FSI LTD sales as well as a change in product mix.

 

After May 15, 2007, we discontinued recording equity in earnings (loss) of affiliate due to transactions with m•FSI LTD. See further discussion of our relationship with m•FSI at Note 4 of the Notes to Consolidated Financial Statements.

 

Net Loss

 

Net loss was $14.6 million in fiscal 2007 as compared to a net loss of $7.3 million in fiscal 2006 and a net loss of $3.3 million in fiscal 2005. The increase in net losses in fiscal 2007 as compared to fiscal 2006 related primarily to the impairment and loss on sale of investment of $4.1 million related to transactions with m•FSI LTD in fiscal 2007. The increase in net losses also related to a decrease in gross margins associated with an increase in the percentage of international sales from 62% of total sales in fiscal 2006 to 69% of total sales in fiscal 2007, as well as a $1.0 million increase in inventory reserves during fiscal 2007. The increase in net loss in fiscal 2006 as compared to fiscal 2005 related primarily to the $7.0 million gain on sale of facility in fiscal 2005.

 

Based upon achieving anticipated revenue, gross margin and operating expense levels, we expect to record a net loss of $1.5 million to $2.0 million in the first quarter of fiscal 2008.*

 

Liquidity and Capital Resources

 

Our cash, restricted cash, cash equivalents and marketable securities were approximately $24.5 million as of August 25, 2007, a decrease of $2.4 million from the end of fiscal 2006. The net decrease was primarily due to $4.1 million of cash used in operating activities, $1.6 million in capital expenditures and $0.5 million of principal payments on a capital lease. The decreases were net of $0.8 million of proceeds from the issuance of common stock, $2.0 million dividend received from m•FSI LTD and $1.2 million proceeds related to the sale of a portion of our investment in m•FSI LTD.

 

Accounts receivable decreased $5.6 million from the end of fiscal 2006. The decrease in trade accounts receivable related primarily to a decrease in shipments from $36.4 million in the fourth quarter of fiscal 2006 to $21.9 million in the fourth quarter of fiscal 2007. Trade receivables will fluctuate quarter to quarter depending on individual customers’ timing of ship dates, payment terms and cash flow conditions.

 

Inventory decreased approximately $6.1 million to $29.6 million at the end of fiscal 2007, as compared to $35.7 million at the end of fiscal 2006. The decrease in inventory related primarily to decreases in work in process and finished goods inventory associated with lower orders. Inventory provisions were $14.7 million at August 25, 2007 as compared to provisions of $13.8 million at the end of fiscal 2006. The increase in inventory provisions related to the decrease in bookings.

Trade accounts payable decreased approximately $5.3 million to $3.5 million as of August 25, 2007 as compared to $8.8 million at the end of fiscal 2006 related to the decreased inventory purchases.

 

Deferred profit was $3.3 million at the end of fiscal 2007 and $4.1 million at the end of fiscal 2006. The decrease in deferred profit related primarily to the decrease in shipments from $36.4 million in the fourth quarter of fiscal 2006 to $21.9 million in the fourth quarter of fiscal 2007.

 

As of August 25, 2007, our current ratio was 3.9 to 1.0, and working capital was $58.7 million.

 

The following table provides aggregate information about our contractual payment obligations and the periods in which payments are due (in thousands):

 

 

 

 

The contractual obligations table above does not include $1.3 million of income tax contingency accruals, as the timing of payments or reversals is uncertain.

 

Capital expenditures were $1.6 million in fiscal 2007, $2.2 million in fiscal 2006, and $1.8 million in fiscal 2005. We expect capital expenditures to be less than $300,000 in the first quarter of fiscal 2008.* Depreciation and amortization is expected to be between approximately $1.1 million and $1.2 million in the first quarter of fiscal 2008.*

 

At the expected revenue and expense run rate, we anticipate using $1.0 million to $2.0 million of cash for operations in the first quarter of fiscal 2008.* The cash usage assumes that we will continue to reduce our current inventory levels and experience an increase in accounts receivable from the fiscal 2007 year-end level.* We believe that with existing cash, cash receipts, cash equivalents, marketable securities and internally generated funds, there will be sufficient funds to meet our currently projected working capital requirements, and to meet other cash requirements through at least fiscal 2008.* We believe that success in our industry requires substantial capital to maintain the flexibility to take advantage of opportunities as they arise. One of our strategic objectives is, as market and business conditions warrant, to consider divestitures, investments or acquisitions of businesses, products or technologies, particularly those that are complementary to our surface conditioning business.* We may fund such activities with additional equity or debt financing.* The sale of additional equity or debt securities, whether to maintain flexibility or to meet strategic objectives, could result in additional dilution to our shareholders.* We currently do not have a line of credit arrangement.

 

Off-Balance Sheet Arrangements

 

We do not have any off balance sheet arrangements.

 

New Accounting Pronouncements

 

In June 2006, the FASB ratified the Emerging Issues Task Force (EITF) consensus on EITF Issue No. 06-3 “How Taxes Collected From Customers and Remitted to Governmental Authorities Should be Presented in the Income Statement (That Is, Gross versus Net Presentation)” (“EITF No. 06-3”). The scope of EITF No. 06-3 includes any tax assessed by a governmental authority that is directly imposed on a revenue-

producing transaction between a seller and a customer, and provides that a company may adopt a policy of presenting taxes either gross within revenue or on a net basis. For any such taxes that are reported on a gross basis, a company should disclose the amounts of those taxes for each period for which an income statement is presented if those amounts are significant. This statement is effective to financial reports for interim and annual reporting periods beginning after December 15, 2006. EIFT No. 06-3 became effective for us as of February 25, 2007. We collect various sales and value-added taxes on certain product and service sales, which are accounted for on a net basis.

 

In June 2006, the Financial Accounting Standards Board (“FASB”) issued Interpretation No. 48, “Accounting for Uncertainty in Income Taxes — an interpretation of FASB Statement No. 109.” This interpretation clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with FASB Statement No. 109, “Accounting for Income Taxes.” This interpretation prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. It also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure and transition. This interpretation is effective for us beginning in fiscal year 2008. We are still evaluating the impact that the adoption of this pronouncement will have on our consolidated financial statements.

 

In September 2006, the Securities and Exchange Commission (“SEC”) issued Staff Accounting Bulletin No. 108 (“SAB 108”), “Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements,” to address diversity in practice in quantifying financial statement misstatements. SAB No. 108 requires that we quantify misstatements based on their impact on each of our financial statements and related disclosures. SAB No. 108 is effective as of the end of fiscal year 2006, allowing a one-time transitional cumulative effect adjustment to retained earnings as of August 27, 2006 for errors that were not previously deemed material, but are material under the guidance in SAB No. 108. We applied the provisions of SAB 108 using the cumulative effect transaction method in connection with the preparation of our annual financial statements for the year ended August 25, 2007. The application of SAB 108 resulted in a $310,000 decrease in accrued professional fees and other accrued expenses and a corresponding decrease in accumulated deficit as of August 27, 2006.

 

 

Our cash flows and earnings are subject to fluctuations in foreign exchange rates due to investments in foreign-based affiliates. As of August 25, 2007, our investments included a 20% interest in m•FSI LTD, which operates in Japan. We denominate the majority of our sales outside of the U.S. in U.S. dollars.

 

Because we assumed direct sales, service and applications support and logistics responsibilities for our products in Europe and the Asia Pacific region starting in March 2003, we have and will continue to incur labor, service and other expenses in foreign currencies. As a result, we may be exposed to fluctuations in foreign exchange rate risks.* As of August 25, 2007, we had not entered into any hedging activities and our foreign currency transaction gains and losses for fiscal 2007 were insignificant. We are currently evaluating various hedging activities and other options to minimize these risks.

 

We do not have significant exposure to changing interest rates as we currently have no material long-term debt. As of the end of fiscal 2007, amortized cost approximated market value for all outstanding marketable securities. We do not undertake any specific actions to cover our exposure to interest rate risk and we are not party to any interest rate risk management transactions. The impact on loss before income taxes of a 1% change in short-term interest rates would be approximately $245,000 based on our cash, restricted cash, cash equivalents and marketable securities balances as of August 25, 2007.

 

 

FSI INTERNATIONAL, INC. & SUBSIDIARIES

 

 

CONSOLIDATED STATEMENTS OF OPERATIONS
Years Ended August 25, 2007, August 26, 2006 and August 27, 2005

 

 

The accompanying notes are an integral part of the consolidated financial statements.

FSI INTERNATIONAL, INC. & SUBSIDIARIES

 

CONSOLIDATED BALANCE SHEETS

 

 

The accompanying notes are an integral part of the consolidated financial statements.

FSI INTERNATIONAL, INC. & SUBSIDIARIES

 

CONSOLIDATED STATEMENTS OF STOCKHOLDERS’ EQUITY AND COMPREHENSIVE LOSS

 

Years Ended August 25, 2007, August 26, 2006 and August 27, 2005

 

 

The accompanying notes are an integral part of the consolidated financial statements.

FSI INTERNATIONAL, INC. & SUBSIDIARIES

 

 

CONSOLIDATED STATEMENTS OF CASH FLOWS
Years Ended August 25, 2007, August 26, 2006 and August 27, 2005

 

 

The accompanying notes are an integral part of the consolidated financial statements.

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

Fiscal Years Ended August 25, 2007, August 26, 2006 and August 27, 2005

 

 

Description of Business

 

FSI International, Inc. (“the Company”) is a global supplier of surface conditioning equipment (process equipment used to etch and clean organic and inorganic materials from the surface of a silicon wafer) and technology and support services for microelectronics manufacturing. The Company’s broad portfolio of batch and single-wafer cleaning products includes process technologies for immersion (a method used to clean silicon wafers by immersing the wafer in multiple tanks filled with process chemicals), spray (sprays chemical mixtures, water and nitrogen in a variety of sequences on to the microelectronic substrate), vapor (utilizes gas phase chemistries to selectively remove sacrificial surface films) and CryoKinetic (a momentum transfer process used to remove non-chemically bonded particles from the surface of a microelectronic device). The Company’s support services programs provide product and process enhancements to extend the life of installed FSI equipment.

 

The Company announced the winding down of its Microlithography business in March 2003 and transitioned the Microlithography (uses light to transfer a circuit pattern unto a wafer) business to a POLARIS^® Systems and Services (“PSS”) organization to focus on supporting the more than 300 installed POLARIS^® Systems, including refurbishments, upgrades, training and spares.

 

The Company’s customers include microelectronics manufacturers located throughout North America, Europe, Japan and the Asia Pacific region.

 

Principles of Consolidation

 

The accompanying consolidated financial statements include the accounts of FSI International, Inc. and its wholly owned subsidiaries, FSI International Asia, Ltd., FSI International Semiconductor Equipment Pte. Ltd., FSI International (France) SARL, FSI International (Germany) GmbH, FSI International (Italy) S.r.l., FSI International (Holding) B.V., FSI International Netherlands B.V., FSI International (UK) Limited, FSI International (Shanghai) Co., Ltd., FSI International (Korea) Co., Ltd., FSI International Israel, Ltd., SCD Mountain View, Inc., and Semiconductor Systems, Inc. All significant intercompany balances and transactions have been eliminated in consolidation. During fiscal 2007, the Company closed its branch office, FSI Malaysia SDN GHD. During fiscal 2005, the Company closed FSI International, Ltd., a foreign sales corporation (FSC).

 

The Company’s fiscal year ends on the last Saturday in August and is comprised of 52 or 53 weeks. Fiscal 2007, 2006 and 2005 consisted of 52-week periods.

 

Revenue Recognition

 

The Company recognizes revenue when persuasive evidence of an arrangement exists, delivery has occurred or services have been rendered, the purchase price is fixed or determinable and collectibility is reasonably assured. If the Company’s equipment sales involve sales to its existing customers who have previously accepted the same type(s) of equipment with the same type(s) of specifications, the Company accounts for the product sale as a multiple element arrangement. Revenue from multiple element arrangements is allocated among the separate accounting units based on the residual method. Under the residual method, the revenue is allocated to undelivered elements based on fair value of such undelivered elements and the residual amounts of revenue allocated to delivered elements. The Company recognizes the equipment revenue upon shipment and transfer of title. The other elements may include installation, service contracts and training. Equipment installation revenue is valued based on estimated service person hours to complete installation and published or quoted service labor rates and is recognized when the labor has been completed and the equipment has been accepted by the customer. Service contract revenue is valued based on estimated service

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

person hours to complete the service and published or quoted service labor rates and is recognized over the contract period. Training revenue is valued based on published training class prices and is recognized when the customers complete the training classes or when a customer-specific training period has expired. The published or quoted service labor rates and training class prices are rates actually charged and billed to the Company’s customers.

 

All other product sales with customer specific acceptance provisions are recognized upon customer acceptance. Revenue related to spare parts sales is recognized upon shipment or delivery based on the trade terms. Revenue related to maintenance and service contracts are recognized ratably over the duration of the contracts.

 

Other Comprehensive Loss

 

Other comprehensive loss pertains to revenues, expenses, gains, and losses that are not included in net (loss) income, but rather are recorded directly in stockholders’ equity. For fiscal 2007, 2006 and 2005, other comprehensive loss consisted of foreign currency translation adjustments and unrealized holding gains on investments.

 

Cash and Cash Equivalents

 

All highly liquid investments purchased with an original maturity of three months or less are considered to be cash equivalents.

 

Marketable Securities

 

The Company accounts for its marketable securities as available-for-sale.

 

Allowance for Doubtful Accounts

 

The Company makes estimates of the uncollectibility of accounts receivable. Management specifically analyzes accounts receivable and analyzes historical bad debts, customer concentrations, customer credit-worthiness, current economic trends and changes in customer payment terms when evaluating the adequacy of the allowance for doubtful accounts. Accounts receivable are charged off after management determines that they are uncollectible.

 

A rollforward of the allowance for doubtful accounts for the fiscal years ended August 25, 2007, August 26, 2006 and August 27, 2005 is as follows (in thousands):

 

 

We collected $55,000 of receivables in fiscal 2007 and $336,000 in fiscal 2006 that had previously been written down to zero, resulting in credits to selling, general and administrative expenses.

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Inventories

 

Inventories are valued at the lower of cost, determined by the first-in, first-out method, or net realizable value. The Company records provisions for inventory shrinkage and for potentially excess, obsolete and slow moving inventory. The amounts of these provisions are based upon historical loss trends, inventory levels, physical inventory and cycle count adjustments, expected product lives, forecasted sales demand and recoverability.

 

Property, Plant and Equipment

 

Building and related costs are carried at cost and depreciated on a straight-line basis over a 5 to 30-year period. Leasehold improvements are carried at cost and depreciated over a three- to fifteen-year period or the term of the underlying lease, whichever is shorter. All other property, plant and equipment assets are carried at cost and depreciated on a straight-line method over their estimated economic lives. Principal economic lives for these assets are one to seven years. Software developed for internal use is depreciated over three to five years beginning when the system is placed in service. Maintenance and repairs are expensed as incurred; significant renewals and improvements are capitalized.

 

Intangible Assets

 

The Company amortizes intangible assets on a straight-line basis over their estimated economic lives which range from two to nine years.

 

Impairment of Long-Lived Assets

 

The Company assesses the impairment of long-lived assets, including identifiable intangible assets, whenever events or changes in circumstances indicate that the carrying amount may not be recoverable, in accordance with FASB SFAS No. 144, “Accounting for the Impairment or Disposal of Long-Lived Assets.” An asset or asset group is considered impaired if its carrying amount exceeds the undiscounted future net cash flow the asset or asset group is expected to generate. If an asset or asset group is considered to be impaired, the impairment to be recognized is measured by the amount by which the carrying amount of the asset exceeds its fair value. If estimated fair value is less than the book value, the asset is written down to the estimated fair value and an impairment loss is recognized.

 

The Company routinely considers whether indicators of impairment of its property and equipment assets are present. If such indicators are present, the Company determines whether the sum of the estimated undiscounted cash flows attributable to the asset in question is less than the carrying amount of the asset. If less, an impairment loss is recognized based on the excess of the carrying amount of the asset over its fair value. Fair value is determined by discounted estimated future cash flows, appraisals or other methods deemed appropriate. If the asset determined to be impaired is to be held and used, the Company recognizes an impairment charge to the extent that the carrying amount of the asset exceeds its fair value. Net intangible assets and long-lived assets amounted to $20.5 million as of August 25, 2007.

 

Considerable management judgment is necessary in estimating future cash flows and other factors affecting the valuation of long-lived assets, including intangible assets, including the operating and macroeconomic factors that may affect them. The Company uses historical financial information, internal plans and projections and industry information in making such estimates.

 

The Company did not recognize any impairment charges for our long-lived assets, including intangible assets, during fiscal 2007, fiscal 2006 or fiscal 2005. Although the Company has not generated positive cash flows in certain prior years, management believes that based on cost reduction actions and revenue growth and margin improvement initiatives, that the Company will have cash flows from these long-lived assets in the future. While the Company currently believes the expected cash flows from these long-lived assets, including

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

intangible assets, exceeds the carrying amount, materially different assumptions regarding future performance and discount rates could result in future impairment losses. In particular, if the Company no longer believes it will achieve its long-term projected sales or operating expenses, the Company may conclude in connection with any future impairment tests that the estimated fair value of its long-lived assets, including intangible assets, are less than the book value and recognize an impairment charge. Such impairment would adversely affect the Company’s earnings.

 

Income Taxes

 

Deferred income taxes are provided in amounts sufficient to give effect to temporary differences between financial and tax reporting. The Company accounts for tax credits as reductions of income tax expense in the year in which such credits are allowable for tax purposes.

 

The Company’s effective income tax rate is based on income, statutory tax rates and tax planning opportunities available to it in the various jurisdictions in which it operates. The Company has established valuation allowances against its U.S. and non-U.S. net operating losses to reflect the uncertainty of its ability to fully utilize these benefits given the limited carryforward periods permitted by the various jurisdictions. The evaluation of the realizability of the Company’s net operating losses requires the use of considerable management judgment to estimate the future taxable income for the various jurisdictions, for which the ultimate amounts and timing of such estimates may differ. The valuation allowance can also be impacted by changes in the tax regulations.

 

Significant judgment is required in determining the Company’s contingent tax liabilities. The Company has established contingent tax liabilities using management’s best judgment and adjusts these liabilities as warranted by changing facts and circumstances.

 

Product Warranty

 

Generally, the Company warrants to the original purchaser that new equipment manufactured by it is free from defects in material and workmanship for six months to two years, depending upon the product or customer agreement. Provision is made for the estimated cost of maintaining product warranties at the time the product is sold. Special warranty provisions are also accrued for major rework campaigns.

 

Warranty provisions, claims and changes in estimates for the fiscal years ended August 25, 2007, August 26, 2006, and August 27, 2005 were as follows (in thousands):

 

 

Foreign Currency Translation

 

For each of our foreign operating subsidiaries the functional currency is generally its local currency. Assets and liabilities of foreign operations are translated into U.S. dollars using month-end exchange rates, and revenue and expenses are translated into U.S. dollars using average exchange rates. The effects of foreign currency translation adjustments are included as a component of accumulated other comprehensive (loss) income in stockholders’ equity.

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

Foreign currency transaction gains and losses are a result of the effect of exchange rate changes on transactions denominated in currencies other than the functional currency. Foreign currency transaction gains (losses) are included in other income, net.

 

Loss Per Common Share

 

Basic loss per share is computed by dividing net loss by the weighted average number of shares of common stock outstanding during the period. Diluted loss per common share for fiscal years 2007, 2006 and 2005 does not include the effect of potential dilutive common shares as their inclusion would be antidilutive. The number of potential dilutive common shares excluded from the computation of diluted loss per share was 3,578,000 for fiscal 2007, 3,699,000 for fiscal 2006 and 4,001,000 for fiscal 2005.

 

Use of Estimates

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that could affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of sales revenue and expenses during the reporting period. Actual results could differ from those estimates.

 

Employee Stock Plans

 

On March 25, 2005, the Compensation Committee of the Board of Directors of the Company approved the accelerated vesting of all unvested options that had an exercise price of $4.06 or greater held by current employees as of March 25, 2005. The accelerated vesting affected options with respect to approximately 857,000 shares of the Company’s common stock. The acceleration of options in the third quarter of fiscal 2005 resulted in higher pro forma stock-based employee compensation expense in fiscal 2005 than there would have been had the Company not accelerated the options. The Company accelerated the vesting of the identified stock options in fiscal 2005 because it resulted in lower compensation charges in future periods under SFAS No. 123R.

 

On August 28, 2005, the Company adopted the fair value recognition provisions of SFAS No. 123R, “Share-Based Payment,” using the modified prospective method. As a result, for fiscal 2007 and 2006, the Company’s results of operations reflect compensation expense for new stock options granted and vested under its stock incentive plan and employees stock purchase plan during the fiscal year and the unvested portion of previous stock option grants which vested during the fiscal year.

 

New Accounting Pronouncements

 

In June 2006, the FASB ratified the Emerging Issues Task Force (EITF) consensus on EITF Issue No. 06-3 “How Taxes Collected From Customers and Remitted to Governmental Authorities Should Be Presented in the Income Statement (That Is, Gross versus Net Presentation)” (“EITF No. 06-3”). The scope of EITF No. 06-3 includes any tax assessed by a governmental authority that is directly imposed on a revenue-producing transaction between a seller and a customer, and provides that a company may adopt a policy of presenting taxes either gross within revenue or on a net basis. For any such taxes that are reported on a gross basis, a company should disclose the amounts of those taxes for each period for which an income statement is presented if those amounts are significant. This statement is effective to financial reports for interim and annual reporting periods beginning after December 15, 2006. EITF No. 06-3 became effective for the Company as of February 25, 2007. The Company collects various sales and value-added taxes on certain product and service sales, which are accounted for on a net basis.

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

In June 2006, the FASB issued Interpretation No. 48, “Accounting for Uncertainty in Income Taxes — an interpretation of FASB Statement No. 109.” This interpretation clarifies the accounting for uncertainty in income taxes recognized in an enterprise’s financial statements in accordance with FASB Statement No. 109, “Accounting for Income Taxes.” This interpretation prescribes a recognition threshold and measurement attribute for the financial statement recognition and measurement of a tax position taken or expected to be taken in a tax return. It also provides guidance on derecognition, classification, interest and penalties, accounting in interim periods, disclosure and transition. This interpretation is effective for the Company beginning in fiscal year 2008. The Company is still evaluating the impact that the adoption of this pronouncement will have on its financial statements.

 

In September 2006, the Securities and Exchange Commission (“SEC”) issued Staff Accounting Bulletin No. 108 (“SAB 108”) , “Considering the Effects of Prior Year Misstatements when Quantifying Misstatements in Current Year Financial Statements,” to address diversity in practice in quantifying the financial statement misstatements. SAB No. 108 requires that we quantify misstatements based on their impact on each of our financial statements and related disclosures. SAB No. 108 is effective as of the end of fiscal year 2006, allowing a one-time transitional cumulative effect adjustment to retained earnings as of August 27, 2006, for errors that were not previously deemed material, but are material under the guidance in SAB No. 108. The Company applied the provisions of SAB 108 using the cumulative effect transition method in connection with the preparation of its annual financial statements for the year ended August 25, 2007. The application of SAB 108 resulted in a $310,000 decrease in accrued professional fees and other accrued expenses and a corresponding decrease in accumulated deficit as of August 27, 2006.

 

Revisions

 

Current assets and current liabilities as of August 26, 2006 have both been adjusted to reflect a $3.8 million increase to properly present VAT receivables and payables on a gross basis.

 

 

In February 2005, the Company sold its Allen, Texas facility, together with the majority of the business equipment to an electronics industry buyer and received approximately $14.4 million in net cash proceeds from the sale. The building and property, plant and equipment sold had a financial statement carrying amount of approximately $7.5 million as of the closing date of the sale. The Company retained ownership of approximately four acres of land adjacent to the site. The Company recorded a gain of $7.0 million on the sale.

 

Concurrent with the sale, the Company entered into a sublease of approximately 45,000 square feet of space in the facility for the Company’s POLARIS^® system and service operations. As the present value of the leaseback rentals was less than 10% of the fair value of the facility, it was considered minor, and the entire gain of approximately $7.0 million was recognized upon the close of the sale. The sublease expires on August 31, 2008; however, the Company has an option to extend the lease through August 31, 2009.

 

 

Financial instruments that potentially subject the Company to significant concentrations of credit risk consist principally of cash equivalents, marketable securities and trade accounts receivable.

 

The Company’s customers consist of microelectronics manufacturers located throughout the world. The Company performs ongoing credit evaluations of its customers’ financial conditions and generally requires no collateral from them. The Company maintains an allowance for doubtful accounts receivable based upon expected collectibility of all accounts receivable.

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The Company invests in a variety of financial instruments such as municipal bonds, auction-rate securities, commercial paper and money market fund shares. The Company, by policy, limits the amount of credit exposure with any one financial or commercial issuer.

 

The carrying amount of the Company’s financial instruments, which includes cash equivalents, marketable securities, accounts receivable, accounts payable and accrued expenses, approximate fair value at August 25, 2007, due to their short maturities.

 

As of August 25, 2007 and August 26, 2006, all marketable securities were classified as available-for-sale. The carrying amount of marketable securities was $8,800,000 as of August 25, 2007 and $11,100,000 as of August 26, 2006.

 

Gross unrealized holding gains were immaterial as of August 25, 2007 and August 26, 2006. The Company manages its cash equivalents and short-term investments as a single portfolio of highly marketable securities, all of which are intended to be available to meet the Company’s current cash requirements.

 

 

Prior to the transaction described below, the Company owned a 49 percent equity interest in m•FSI, LTD (“m•FSI”), a Japanese joint venture company formed in 1991 among the Company, Mitsui & Co., Ltd. (“Mitsui”) and Mitsui’s wholly owned subsidiary, Chlorine Engineers Corp., Ltd. (“CEC”). m•FSI is engaged in the manufacturing and distribution in the Japanese market of semiconductor equipment and products, including certain products of the Company. On May 15, 2007 (the “Closing Date”), the Company, CEC, Mizuho Capital Co., Ltd, (“Mizuho”), The Yasuda Enterprise Development III, Limited Partnership (“Yasuda”) and certain m•FSI managers (“m•FSI Management Group”) entered into a Stock Purchase Agreement (the “Agreement”). The m•FSI Management Group does not include any officers or employees of the Company. Under the Agreement, m•FSI paid on the Closing Date, a $4.2 million dividend to its shareholders prior to the sales contemplated in the Agreement, of which the Company received approximately $2.0 million. Under the Agreement, CEC and MBK Project Holdings Ltd. (“MPH”), a wholly owned subsidiary of Mitsui, sold all of their combined 51 percent equity ownership in m•FSI and the Company sold 28.4 percent of its equity ownership in m•FSI, or a total of 79.4 percent, to Yasuda, Mizuho and the m•FSI Management Group for a total purchase price of $1.8 million. On the Closing Date, the Company received total proceeds of $3.2 million, net of applicable taxes. At the end of fiscal 2007, the Company had a 20% equity ownership in m•FSI. As a result of the transaction, the Company’s ownership and business relationship with m•FSI changed such that the Company no longer had the ability to exercise significant influence over m•FSI. Therefore, the Company began to account for its investment in m•FSI under the cost method after completion of the transaction. Previously, the Company accounted for its investment in m•FSI under the equity method. On the Closing Date, the Company entered into a Termination and Release Agreement with Mitsui, CEC, MPH and m•FSI, for the termination of the following agreements and any amendments thereto:

 

(i) the m•FSI Distribution Agreement, dated September 17, 2004, providing the Company with the exclusive rights to distribute m•FSI surface conditioning products outside of Japan,

 

(ii) the FSI Distribution Agreement, dated June 5, 1991, providing m•FSI with exclusive rights to distribute the Company surface conditioning products in Japan,

 

(iii) the m•FSI License Agreement, dated September 17, 2004, pursuant to which m•FSI granted to the Company a license to certain m•FSI intellectual property and technology,

 

(iv) the FSI License Agreement, dated June 5, 1991, pursuant to which the Company granted to m•FSI a license to certain of the Company’s intellectual property and technology, and

 

(v) the Shareholders Agreement, dated June 5, 1991, among the Company, CEC and MPH related to the establishment of m•FSI.

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)

 

The Company and m•FSI also entered into a new distribution agreement, with an initial five-year term, providing m•FSI with the exclusive right to sell, lease or otherwise distribute the Company’s SC products in Japan.

 

The Company sold approximately $5,355,000 in fiscal 2007, $5,924,000 in fiscal 2006 and $4,130,000 in fiscal 2005 of its products in the aggregate to m•FSI LTD as an affiliate. Trade accounts receivable from m•FSI LTD was $528,000 at August 26, 2006 and deferred profit with m•FSI LTD was $391,000 at August 26, 2006. As of August 25, 2007, m•FSI LTD is no longer considered an affiliate.

 

 

The Company has capital and operating lease agreements for equipment and manufacturing and office facilities. The future net minimum lease payments for all leases with noncancellable lease terms in excess of one year at August 25, 2007 are as follows (in thousands):

 

 

Rental expense for all operating leases consisted of the following (in thousands):

 

 

 

Inventories are summarized as follows (in thousands):

 

 

FSI INTERNATIONAL, INC. AND SUBSIDIARIES

 

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS — (Continued)